SHRINKAGE - 885 ads

Friday, September 08, 2023

As the typical cycloaliphatic epoxy resin, TTA21 (3 4 epoxycyclohexylmethyl formic acid-3 ', 4' - epoxycyclohexyl methyl ester)has strong dilution ability, high Tg, good adhesion on a variety of substrates, low shrinkage and oxygen free polymerization inhibition. Contact Tetra for...

Friday, September 08, 2023

Tetra special epoxy resin offers two product categories with cycloaliphatic epoxy resin and glycidyl amine epoxy resin. These products have various features on dilution ability, glass transition temperature, adhesion, volume shrinkage, and migration. Therefore, they have been widely...

Thursday, September 07, 2023

Product Name: Hexamethylcyclotrisiloxane Molecular Formula: [(CH3 ) 2 SiO]3 Molecular Weight: 222.47 CAS No.: 541-05-9 UN No.: 1325 Physical and Chemical Properties: Melting Point: 64℃ Boiling Point: 134℃ Relative Density (water=1): 1.12 Appearance: White crystalline lens. Technical...

Thursday, September 07, 2023

Quantity : 20GP

CSA Binder Introduction: Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious material blend high in C4A3S (Calcium Sulfoaluminate Crystals). CSA Binder characteristics • Appearance: light grey powder • Rapid strength...

Thursday, September 07, 2023

Quantity : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Thursday, September 07, 2023

Quantity : 20GP

CSA expansive additive description: The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with...

Thursday, September 07, 2023

Quantity : 20GP

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement...

Thursday, September 07, 2023

Quantity : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Thursday, September 07, 2023

Quantity : 20GP

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. cement CSA is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Thursday, September 07, 2023

Polyester Tyre cord fabric, also known as Dipped polyester Tyre Cord fabric. It is an important reinforcement materials woven with High tenacity polyester yarns as warp and Elastic weft yarns as weft. Yusheng's polyester tyre cord fabric possess the properties of high breaking strength...

Thursday, September 07, 2023

Nylon mono yarn consists of a single solid filament & can be obtained by direct spinning method or by splitting the Mother Yarn. Nylon monofilament yarn is a practical and versatile type of yarn used across various industries. Its unique combination of strength and elasticity...

Thursday, September 07, 2023

Nylon is a synthetic thermoplastic fiber derived from Petroleum. As reinforcement materials, nylon 6 dipped tyre cord fabric plays an important role in the quality of automobile tyres. Nylon 6 Tyre cord fabric with its high energy absorption ability impact strength, chock resistance...

Wednesday, September 06, 2023

Steel Fiber For Tunnel Steel fiber reinforced concrete (SFRC) has good crack resistance, low shrinkage, good waterproof and anti-seepage properties, and can be used for pavement and waterproof layers of expressways. For example, the bridge deck pavement of Jingwuhuang Expressway...

Wednesday, September 06, 2023

Steel Fiber For Expressway Pavement In highways, airports, and other pavement projects, cement concrete is used to build pavements, airport pavements, industrial floors, bridge decks, and roofs. The advantages of cement concrete of concrete fiber suppliers are high rigidity, strong...

Wednesday, September 06, 2023

As a professional CNC metal parts manufacturer, HSJ is specialized in billet aluminum parts and custom aluminum component manufacturing. Material : aluminum (AS PICTURES) Process ： CNC machine + deburrs Type ： Broaching, Drilling, Etching / Chemical Machining, Laser Machining. Material...

Friday, September 01, 2023

What Is SMC Plastic? SMC, BMC thermosetting plastic products are produced by BMC SMC plastic molding process. BMC/SMC Motor Plastic SMC/BMC edging motor change the traditional material of iron and aluminum to reduces the process but seals more. High-Voltage Electrical Products Mainly...

Friday, September 01, 2023

The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest level within its ability. The traditional materials for satellite antenna are iron or aluminium. But the better properties of SMC material...

Wednesday, August 30, 2023

The car light mould plays a vital role in illuminating vehicles, serving as the eyes of cars. It encompasses all the lighting systems employed in automobiles. The design and production of auto lamp mould necessitate meticulous attention due to the exacting requirements of automobile...

Tuesday, August 29, 2023

The rapid cooling and rapid heating high-gloss mold temperature machine use the rapid switching between normal temperature water and high-temperature steam to achieve rapid temperature changes in different stages of a molding cycle so that the temperature of the mold can meet the...

Thursday, August 24, 2023

Quantity : 1000t/m - Price : 25kg/bag

ANMEI, YOUR PROFESSIONAL PLASTIC SUPPLIER! Contact US TODAY ANMEI focuses on supplying the 5G New energy and intelligence appliance market with engineering plastics and color masterbatch china. We develop and keep innovations to provide customized services on supplying modified plastics PA6GF...

Thursday, August 24, 2023

Quantity : 1000t/m - Price : 25kg/bag

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables...

Thursday, August 24, 2023

Quantity : 1000Kgs - Price : 400-800CNY

CA Series-330CA30 PEEK FC, CF PEEK carbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bearing surface heat dissipation, at the same time has a high thermal deformation temperature (336 ° C) , also can maintain strength...

Thursday, August 24, 2023

The car light mould plays a vital role in illuminating vehicles, serving as the eyes of cars. It encompasses all the lighting systems employed in automobiles. The design and production of auto lamp mould necessitate meticulous attention due to the exacting requirements of automobile...

Thursday, August 24, 2023

Quantity : 1000kg - Price : 400-800CNY

PEEK Color R&D Series can be customized according to the customer's own demand. Different PEEK plastic colors can be chosen for our PEEK raw material. Having good thermal stability, color consistency, high purity, and high-temperature resistance, our PEEK material color R...

Thursday, August 24, 2023

Quantity : 1000kg - Price : 400-800CNY

CA Series-770CA30 carbon fiber filled PEEK reinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or even...

Thursday, August 24, 2023

Quantity : 1000kg - Price : 400-800CNY

CA Series-550CA30 PEEK carbon fiber reinforcement is a 30% carbon fiber reinforced PEEK plastic material, the addition of carbon fiber significantly increased the material's wear resistance and high temperature mechanical strength, thermal conductivity is pure resin G series 3 times...

Thursday, August 24, 2023

Quantity : 1000kg - Price : 400-800CNY

Antistatic PEEK R & D Series has excellent electrical insulation, high temperature resistance and wear resistance. Anti-static peek color is black, the biggest feature is excellent electrical insulation performance. Specification of Antistatic Material PEEK Polymer R&D Series...

Wednesday, August 23, 2023

High vacuum die casting process: free mold opening, low production cost, forming speed, high processing accuracy, support small batch customization and other characteristics, which can greatly reduce the product research and development costs and risks, but also accelerate the development...

Wednesday, August 23, 2023

Soft Rubber rapid prototype, Hardness is generally between shore A 30~90 degrees, because soft rubber plastic prototype has flexibility, it is widely used in the rapid prototype industry. The processing method of soft plastic rapid prototype is relatively single, and it can only be...

Saturday, August 05, 2023

Cas 8001-26-1 Flax Seed Oil/Linum Usitatissimum Seed Oil Linum usitatissimum linseed seed oil is extracted from the linseed by SFE-CO2 Extraction. Cas 8001-26-1 Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil is distinctive in the fatty acid composition of triglycerides...

Tuesday, August 01, 2023

Aluminum squeeze casting also known as aluminium liquid die forging, is a new metal forming process with casting characteristics and similar to die forging It not only has the advantages of simple casting process, low production cost and complex shape of workpieces, but also has the...

Saturday, July 29, 2023

Packson's injection molding machines range in capacity from 60-800T, providing a wide range of options for our clients. Our facility includes 40 sets of injection machines, with 9 NISSEI and 14 LSR machines housed in a class 8 clean room to ensure the highest level of cleanliness and quality...

Friday, July 28, 2023

Chemical fiber canvas is mainly made of nylon or other chemical synthetic fibers, which can also be used as oil canvas. However, high-quality chemical fiber canvas should be chosen, as it has low shrinkage rate, clean color, light weight, and low cost. Polyester Canvas Fabric For...

Friday, July 28, 2023

Blended with chemical fiber and pure cotton, polyester cotton canvas combines the advantages of two types of canvases and is a widely praised spray painting cloth by European and American customers. Polycotton canvas fabric not only has the characteristics of strong elasticity, impact resistance...

Wednesday, July 26, 2023

Overmolding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product...

Wednesday, July 26, 2023

Insert Moulding Design USM molds focus on structural parts injection molds, gas-assisted and water-assisted injection mold, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product...

Wednesday, July 26, 2023

Gas Assist Injection Molding Design Guide Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas assist molding; The product wall thickness of water-assisted...

Wednesday, July 26, 2023

The bright future of the magnesium market benefits from the transformation and level-up of China's automobile industry, like 3C and other industries. Among them, the lightweight meets the environmental protection needs, all the good things for the wide use of magnesium ingots, especially...

Wednesday, July 26, 2023

Quantity : Per Order - Price : $0.1-$200

The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is easy...

Wednesday, July 26, 2023

The horizontal flow wrap machine is an automatic continuous shrinkage packaging equipment, which is characterized by the fast temperature rise of the sealing knife, good stability, and low maintenance cost. The shrinkage temperature and motor transmission speed of our horizontal...

Wednesday, July 26, 2023

GNS-5030LW high-speed fully automatic shrink tunnel machine is a high-speed constant temperature shrinkage packaging machine independently developed and designed by Guonuo. This automatic heat shrink packaging machine series has the advantages of reasonable price, high efficiency...

Saturday, July 22, 2023

Quantity : 30 sets of - Price : $1,000-$10,000

Die Casting Mould Die casting mould is a method of casting liquid die forging. It is a process completed in a special die casting moulding machine. The major advantage of mould die casting is that thousands of castings can be produced quickly by die casting mould supplier, die casting...

Saturday, July 22, 2023

Quantity : 30 sets of - Price : $1,000-$10,000

Electronics Product Part With the fast growth in the electronic industry, the demand for injection molding electronics is much higher. The injection molding electronics can be intricate or simple. Intricate injection molding electronics can be economical because they combine many...

Saturday, July 22, 2023

Quantity : 30 sets of - Price : $1,000-$10,000

Die Casting Mould Die casting mould is a method of casting liquid die forging. It is a process completed in a special die casting moulding machine. The major advantage of mould die casting is that thousands of castings can be produced quickly by die casting mould supplier, die casting...

Friday, July 14, 2023

PA6 FR is a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA 6 GF30 flame retardant free of halogens has achieved full coverage from electronic&electrical fields to the industrial, commodity consumer market...

Friday, July 14, 2023

PA6 GF30 FR is a PA6 with 30% glass-fibers and halogens flame retardant. PA 6 GF30 Halogenated FR Features Glass fiber reinforced 30% PA66 PA6 Density(g/cm3) 1.12-1.14 1.38 Water absorption(%) 1.3-1.9 1 Surface hardness M100 M100 Shrinkage(%) 0.5 0.4 Continuous heat...

Friday, July 14, 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Friday, July 14, 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Friday, July 14, 2023

PA66GF50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of PA66 GF50 (A2011J) PA 6.6 GF50 HB grade is applied...

Wednesday, July 12, 2023

Price : 2.4-2.9$/kg

What Is Stabiliser 466? Description Description of Food Grade CMC Sodium carboxymethyl cellulose (CMC/cellulose gum) is a kind of cellulose ether, that can easily be soluble in cold and hot water, with maximum yield, most widely and conveniently used among all cellulose products....

Thursday, July 06, 2023

Price : USD0.1-15

3 to 1 shrink tubing using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Thursday, July 06, 2023

INDUSRIAL CHILLER MACHINE BY SOXI Soxi is one of the top industrial chiller machine manufacturers in China. Industrial water chiller system plays an important part in the plastic moulding process, injecting frozen water into the flow channel inside the mold, cooling the mold through...

Thursday, July 06, 2023

Industrial Needle Punched PET Spunbond Non-Woven Fabric Industrial PET spunbond non-woven fabric has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120°C. The electrical insulation of the polyester spunbond nonwoven...

Wednesday, July 05, 2023

Quantity : 130-140 To - Price : USD 1.5-6.0 / kgs

It has high puncture resistance, good shrinkage and elongation. During the shrinkage process, the film can not produce holes. Because the shrink film is often suitable for outdoor use, UV anti-ultraviolet agent needs to be added. It has the advantages of strong toughness, high elasticity...

Wednesday, July 05, 2023

Quantity : 130-140 To - Price : USD 1.5-6.0 / kgs

The high-brightness base film is a three-layer co-extruded biaxially stretched polyester film with excellent optical properties such as high gloss and high transmittance. Features: high transparency, high gloss, suitable shrinkage and excellent processing performance Conventional thickness...

Wednesday, July 05, 2023

Quantity : 1200sets/y - Price : USD10000-200000

Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. Double Heads Large CNC EDM Machine Highlights 5th generation EDM machining...

Wednesday, July 05, 2023

UHPC is a new type of cement composite material with good mechanical properties, good durability and good volume stability. Compared with traditional reinforced concrete structures, UHPC structure life can be doubled. The Advantages of SDS-1835 0.18mm-0.35mm Diameter 13±1mm Copper...

Wednesday, July 05, 2023

Micro steel fiber are made of copper-coated steel wire. Micro steel fiber wire is one of most important material of RPC and UHPC. UHPC has high strength, high toughness, very good durability and volume stability. This micro steel fiber is an excellent new building material. Micro...

Thursday, June 29, 2023

Price : $850~$2000 / ton

As defined by its main properties, copper offers excellent electrical and heat conductivity, and good corrosion resistance ability as well. But native copper is rarely to be used, it usually exists to be a copper-based alloy so that the other elements can help greatly reduce the casting defects...

Wednesday, June 28, 2023

Price : 100USD

Custom high Precision Compression/bulk molding compound manufacturing with fast lead time BMC/SMC Mould Manufacturer We mainly use bmc injection molding and pressure molding as the methods. When designing the flow channel and parting surface, we think that the cavity pressure should...

Wednesday, June 14, 2023

Price : 0.01-1000

If you need to handle the materials, no matter vertical lift, horizontal movement, or 360-degree rotation movement, you can find idea material handling equipment and tools at TITANSUHE to move, control, and store your materials. As a professional material handling equipment factory...

Thursday, June 01, 2023

There are many types of steel fibre used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fiber make concrete have extremely high flexural...

Thursday, June 01, 2023

Dipped Polyester Yarn is widely utilized in a variety of sectors to make industrial sewing threads, fishnets, ropes, and mechanical rubber items. The offered yarn is well suited for stitching and weaving applications and is produced using premium fibers. This polyester yarn's main...

Thursday, May 25, 2023

Price : 100USD

2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years...

Tuesday, May 23, 2023

Micro brass fibers are made of copper coated steel wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Copper micro...

Tuesday, May 23, 2023

There are many types of steel fibre used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fiber make concrete have extremely high flexural...

Tuesday, May 23, 2023

There are many types of steel fibres used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Wednesday, May 17, 2023

Price : 2300 USD/Ton--3700 U

The main materials of ES non woven polyethylene fabric are PP+PE and PET+PE, customers choose different materials according to the product's application. The Overview of ES Non-Woven Fabric The main materials of ES non woven polyethylene are PP+PE and PET+PE, customers choose different...

Friday, May 12, 2023

POY spinning machine adopted Newly designed Spin-Beam with less energy consumption by 30% compared with conventional ones. Adopted Bottom mounted spin packs with better melt flow, better temperature evenness and less manpower required. New type of poy machine quenching system providing...

Friday, May 12, 2023

JWELL POE/EVA film production line features: The salivating extruder adopts multi-machine co-extrusion single screw extruder, which can be extruded by EVA and POE layers, ensuring performance and saving cost to a great extent. Roller body part adopts double-sided embossing. The cooling...

Sunday, May 07, 2023

Golden VacTM vacuum EDTA Tubes Vials ( Lavender or Purple Top) contain EDTA as an anticoagulant and are widely used for determinations in EDTA whole blood clinical hematology tests, especially for a routine blood examination. EDTA tube is one kind of whole blood collection tube. Description...

Sunday, May 07, 2023

Quantity : 100k - Price : $0.005-$3.4

PCB board to board connectors and SMD board to board connectors are used to accurately interconnect printed circuit boards (PCBs) in a stackable manner. They can accommodate various types of PCB orientations, relative distances, and space constraints to allow for design flexibility...

Saturday, May 06, 2023

Price : $700-1100/MT

How to Make Boron Carbide Boron carbide is a kind of black crystal with a metallic luster, also known as black diamond, which belongs to inorganic nonmetallic material. At present, everyone is familiar with boron carbide material may be because of the application of bullet-proof armor...

Saturday, April 29, 2023

Auto off relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core...

Saturday, April 29, 2023

CIC is a more than 30-year manufacturer and reputed supplier of thrust roller used in rotary kilns, rotary type driers and so on. CIC has been specialized in design, producing whole set of rotary machinery, so also has rich experience in supplying support device, such as thrust roller...

Saturday, April 29, 2023

CIC is a more than 30 years manufacturer and reputed supplier of support roller used in rotary kilns, rotary type driers and so on. CIC has been specialized in designing, producing whole set of rotary machinery, so also has rich experience in supplying support device, such as support roller...

Thursday, April 27, 2023

Machining ABS material is an abbreviation for acrylonitrile-butadiene-styrene copolymer board, and is a type of polymer board that combines the excellent abrasion resistance, oil resistance, and impact resistance of PS, SAN, and BS boards. A new type of material in the fields of food...

Tuesday, April 18, 2023

2k plastic injection moulding is one type of injection mold. 2k two color molding is also named as two shot molding, double shot mold, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors...

Tuesday, April 18, 2023

The wiring box adopts a drawer-type structure, that can be drawn out during operation, put back after completion. The use of galvanized cold-rolled steel plate and surface spraying process, optical fiber distribution plate using doped anti - ene material spray shrinkage material,...

Thursday, April 13, 2023

Quantity : 30-40sets/ - Price : USD3000-200000

2K Molds The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding...

Wednesday, April 12, 2023

Quantity : 1000t/m - Price : 2-15 USD

Flame-retardant PA66FR is a halogen-free flame retardant engineering plastic made of nylon 66 resin as a base material (other fibers can also be added), mixed and extruded. Typical Application of Nylon66 PA66 Halogen-free FR(A2005X01) Anmei PA66 FR is filled with minerals and the...

Tuesday, April 11, 2023

The horizontal form fill and seal machine is an automatic continuous shrinkage packaging equipment, which is characterized by the fast temperature rise of the sealing knife, good stability, and low maintenance cost. The shrinkage temperature and motor transmission speed of our horizontal...

Saturday, April 08, 2023

High precision die casting involves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be described as the process of combining pressure, speed, and time to achieve an ideal cast metal part. The pressure applied during the casting...

Friday, April 07, 2023

Quantity : 1000 ton/m - Price : 1-3usd/kilogram

Mercerizing agent is used to deal with wool and cashmere, it can stop textile from being yellowish and is good at removing scale of wool. It is harmless to human body. Mercerizing The process of using concentrated caustic soda solution to deal with Cotton goods ( yarn or fabric) under...

Saturday, April 01, 2023

Medical Equipment Mold HanKing Mould is an ISO9001: 2015 certificated experienced factory focusing on developing, design and manufacturing plastic injection moulds and plastic molded parts for medical devices. Medical Device Mold HanKing Mould has More than 10 years of experience...

Thursday, March 30, 2023

Quantity : 4700TON /m - Price : $6.5-7.5USD/KG

What is the Difference Between hydrophilic and hydrophobic non woven fabric？ First of all, let's see what is the difference between Hydrophobic and Hydrophilic. From the literal meaning, it can be seen that the two are completely opposite. One way to remember hydrophobic and hydrophilic...

Wednesday, March 29, 2023

Quantity : 1200sets/y - Price : USD10000-200000

Double Heads large edm machine Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. A1470 Double Heads CNC EDM Sinker A1880 Double...

Wednesday, March 29, 2023

Quantity : 1200sets/y - Price : USD10000-200000

Windows Platform CNC EDM Machine ADI series CNC EDM sinker has the latest control system at the platform Windows 7, efficiency is about 20-30% higher than previous DOS based control system. Types of windows EDM machines made by DMNC are listed below. ADI300 CNC EDM Machine With Manual...

Wednesday, March 29, 2023

Micro steel fibers are made of copper micro wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel fiber...

Wednesday, March 29, 2023

There are many types of steel fibers used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Thursday, March 23, 2023

Plastic crushers, also known as plastic shredder granulators, pulverizers, plastic scrap crusher machine, stripping machines. Plastic waste crusher machine can be used across a wide range of industries, including the fields of injection molding, blowing, and extruding production....

Saturday, March 18, 2023

Introduction Of auto box packing machine With the faster growing sales and broader product selection brought to the business, most e-commerce companies are facing fulfillment complexities that could threaten the efficiency and profitability of its operations. The total number of packages...

Saturday, March 11, 2023

The horizontal form fill and seal machine is an automatic continuous shrinkage packaging equipment, which is characterized by the fast temperature rise of the sealing knife, good stability, and low maintenance cost. The shrinkage temperature and motor transmission speed of our horizontal...

Saturday, March 11, 2023

The horizontal form fill and seal machine is an automatic continuous shrinkage packaging equipment, which is characterized by the fast temperature rise of the sealing knife, good stability, and low maintenance cost. The shrinkage temperature and motor transmission speed of our horizontal...

Saturday, March 04, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, March 04, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, March 04, 2023

Consumer electronics is very popular in our daily life. It consists of many different plastic parts, pcb boards, wires, battery and some metal parts. To produce the plastic components of consumer electronics, we need manufacture the plastic injection molds first. Consumer electronics...

Saturday, March 04, 2023

Price : 100USD

Chafer Fabrics are the special industrial fabrics mainly made of Nylon 6, Nylon 66 and Polyester yarns. Chafer fabric has quite high breaking strength and good adhesion. Yusheng produces a variety of chafer fabrics, Standard products mainly made of Nylon 6, Nylon 66 and Polyester...

Friday, March 03, 2023

Quantity : 10t - Price : USD1-1000

Linum usitatissimum seed oil is extracted from the linseed by SFE-CO2 Extraction. Cas 8001-26-1 Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil is distinctive in the fatty acid composition of triglycerides, which contains an unusually large amount of α-linolenic acid...

Friday, March 03, 2023

Price : 0.1-200USD

The main features of the press ball valve are its compact structure, reliable sealing, simple structure and convenient maintenance. The sealing surface and the spherical surface are often in a closed state, which is not easy to be eroded by the medium. This OEM ball valve is easy...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Tuesday, February 28, 2023

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 8USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 8USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 8USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 8USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 7USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 8USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 1kg - Price : 8USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Saturday, February 25, 2023

Quantity : 200kg - Price : 4.68-8.88USD

- Product description - GTSIL-P series silicone are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Friday, February 24, 2023

Custom high Precision Compression/Injection Moulds Manufacturing with fast lead time BMC/SMC Mould Manufacturer As one of sheet molding compound suppliers, we mainly use injection molding and pressure molding as the methods. When designing the flow channel and parting surface, we...

Thursday, February 23, 2023

GA-9442/GA-9443 platinum rubber have good fluidity, suitable for high voltage injection molding, compression molding, or extrusion molding techniques to produce power cable accessories. GA-9440E cable rubber has good fluidity property, suitable for producing power electric cable accessories...

Thursday, February 23, 2023

GA-20*9 series self adhesive silicone is self-bonding silicone rubber, have good bonding property, no need for first coat, low-temperature curing, short curing time, etc. property. Features of Selective Self-Adhesive Liquid Silocone Rubber GA-20*9 Series Liquid Silicone Rubber Feature...

Thursday, February 23, 2023

Quantity : 3000000 - Price : 0.1-1000USD

Empower Hospital Digital Transforming Purpose of RFID Applications in Healthcare Invengo is revolutionizing the healthcare industry by transforming the way how hospitals and healthcare professionals manage their inventory, people, assets, and supply chain to reduce costs and provide...

Thursday, February 23, 2023

Quantity : 200000 - Price : 3-50USD

Display stands with different materials and their features: 1. Wooden display stand: The advantage is that the structure can be adjusted and it can make a variety of design effects. And as a display stand, the price is also moderate. The disadvantage is that the material is relatively heavy...

Wednesday, February 22, 2023

Pump with a wide range of mechanical seals, different models, but there are five major leaks: Seal between sleeve and shaft; Seal between movable ring and shaft sleeve; Dynamic and static ring seal; The seal between the static ring and the static ring seat; Seal between the end cap...

Friday, February 17, 2023

Cold Rolled Steel and Hot Rolling Advantages and Disadvantages In general, the tensile strength, yield strength, plasticity, and toughness of hot rolled steel after overheating treatment will be improved. In addition, heat treatment can eliminate residual stress, while cold rolling...

Thursday, February 16, 2023

ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability 2k injection molding is one type of injection mold. 2k molding is also named as two shot molding, double shot molding, double-color mold, Multi-material,...

Thursday, February 16, 2023

The wiring box adopts a drawer-type structure, that can be drawn out during operation, put back after completion. The use of galvanized cold-rolled steel plate and surface spraying process, optical fiber distribution plate using doped anti - ene material spray shrinkage material,...