B2B Services

PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20, you can fill out the form below to connect with us.

Benefits of PA6 ABS GF20

Flame retardant pa material

Semi crystalline thermoplastic

Good impact strength and stiffness

Good low temperature performance

Outstanding wear resistance

Good temperature resistance

The degradation of thermal oxidation is reduced

Improved long-term heat and stability to ultraviolet and visible light

PA6 GF20 Application

The automotive industry using PA6 GF20 includes many components, such as automotive dashboard, exterior panel, interior trim panel and steering Panels, soundproof panels, door locks, bumpers and air ducts. In terms of electrical appliances, PA6 GF20 is widely used in refrigerators, televisions, washing machines, air conditioners, computers, copiers and other electronic appliances.

In terms of building materials, PA6 GF20 is widely used in packaging, furniture, sports and entertainment products, machinery and instrumentation industries.

Typical Application of PA6 GF20 heat stabilized (A1006D)

Glass fiber 20% PA6 reinforced (25% GF is workable as well) can be used for heat-resistant and high-strength structural parts such as machinery, auto parts, power tools, coil frames, engine covers, etc.

Other Details of PA6 GF20 heat stabilized (A1006D)

Physical Property of PA6 GF20

Ash

(15.0% 1 ISO3451/1)

Conditioned

600°C*2h

Density

(1250Kg/m3 1 ISO1183)

Conditioned

23°C

Shrinkage Parallel Flow

(0.5-0.7 % 1 ISO294-4)

Shrinkage Vertical Flow

(0.7-1.1% I ISO294-4)

Mechanical Properties of PA6 GF20

Tensile strength (125.0MPa 1 ISO527)

Conditioned

5mm/ min

Tensile Strain at Break (2.5% I ISO527)

Conditioned

1.0J

Notched Impact Strength (125 0MPa I ISO527)

Conditioned

2mm/min

Flexural Strength (190MPa 1ISO178)

Conditioned

2mm/min

Flexural Modulus (5700 MPa I ISO178)

Conditioned

5mm/ min

Thermal Property of PA6 GF20

Melting Point

(220°C I ISO11357)

Hot Deformation Temperature

(175*C I ISO75)

Conditioned

1.8MPa

Flammability Class

(HB 1UL94)

Conditioned

mm

Injection Molding Conditions of PA6 GF20

Drying Temperature

130°C

Drying Time

3h

Cylinder Temperature

240-260°C

Nozzle Temperature

240-260*C

Tooling Temperature

80*C

* Molding conditions are just for reference, please make an adjustment based on the actual situation

As an engineering plastic company, we can offer sorts of modified plastic for sale, if you have needs, please contact us.

Location : Qiushe Industrial Zone, Tongli Town, Wujiang District, Suzhou City, 215215 Suzhou ,
Contact : DAN XU, 86 0512 63012966

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics

Search in a category : B2B Services
Search in a category :
a1006d, engineering, plastics, stabilized, heat, a1016d, gf20
France 75013 Stock lots
TUBE A LED rotatif OSRAM ST8-RB2, G13, 10W, 865, 1000LM, 60CM, 40000H

Sunday, May 29, 2016

Quantity : 90

- Avantages des luminaires LED OSRAM - - Qualité OSRAM - Produits LED de haute qualité pour les demandes exigeantes - Remplacement direct des luminaires conventionnels fluorescents ou halogènes - Le remplacement des luminaires standard permet jusqu'à 85 % d'économie d'énergie...

CMDI

  • cmdi
  • 75013 - Paris
  • 06 64 77 92 21
Thailand 10250 Raw materials
HARDWOOD CHARCOAL

Tuesday, July 14, 2015

Quantity : 15000MT - Price : 200euro

HARDWOOD CHARCOAL we are suppliers of BBQ HARDWOOD CHARCOAL BBQ CHARCOAL Carbon content 85% Moisture level 05% Ash/ dust AVG 03% Volatile matter 13% Heating Level 6800 Kcal /kg Sulphur (%) 0.051 Burning Time 980 sec/cm3 Smell when burn acceptable smell Smoke when burn...

ASIATIC AGRO INDUSTRY CO, LTD

  • 10250 - bangkok
  • +66 2 62 61 74 65
  • +66 9 62 91 74 69
France 518057 Raw materials
RTV-2 silicone rubber for mold making

Monday, March 31, 2014

Quantity : ≥200KG - Price : 5.88 USD/KG~6.98 USD

RTV-2 silicone rubber for Mold making Product Model: INNO SILICA® IS-CR Hardness: 15 Shore A, 20 Shore A, 25 Shore A, 30 Shore A, 35 Shore A, 40 Shore A Applications: It is used primarily in the mold-making industry with pouring or brushing onto the models to make the molds. RTV-2...

Shen Zhen Inno Silica Co.,Ltd