Equipment goods

Coaxial Wire Stripping Machine

Operating procedures of semi-automatic coaxial wire stripping machine.


1. Purpose
Establish proper equipment to prevent accidents and ensure the normal operation of equipment and improve work efficiency.

2. Precautions before work
2.1 The status symbol of each equipment shall be marked with the equipment name, equipment number, the initial opening time of the equipment and the department that uses the equipment.
2.2 Check whether the power is connected before work.
2.3 Check whether the working area is clean and in place. If the work site is to be cleaned, power must be turned off to avoid accidents.
2.4 Check whether the connection part of the machine is loose. If found, contact the equipment technician for inspection without delay.
2.5 Staff must be trained before the operation, and they can be hired after training.

3. Matters with attention during work.
3.1 When the machine is turned on, if there is any abnormal sound, please inform the equipment technician for inspection in time.
3.2 The staff shall not be allowed to move, disassemble equipment, test instruments, adjust the parameters set by the equipment. Contact the equipment technician if it is necessary.
3.3 The line should be placed in the middle of the clamps to avoid clamping the line.
3.4 If there is a new type of wire, it needs to be rotated. Firstly, the equipment technician shall adjust the equipment parameters and adjust the optimal state to be operated by the staff.
3.5 If abnormal conditions or abnormal detection results are found in the using process, the application shall be terminated immediately. The equipment technician shall be adjusted, and the calibration can be put into use after the repair.
3.6 Confirmation of deviation of inspection equipment shall be conducted to re-evaluate the products in the past and re-test if necessary.

Location : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu,
Contact : Lee Salome, 0086 0512 57169166

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Coaxial Wire Stripping Machine

Search in a category : Equipment goods
Search in a category :
coaxial, machine, wire, stripping
Ivory Coast 843 Everything else / Bulk
Offers cement and paint from spain

Tuesday, July 07, 2026

Quantity : 1500000 to - Price : 88 USD

Hi , I am hereby requesting a partnership with you . Indeed , representing a Tunisian company we work with we offer the high quality cement and tested at 88USD per ton. Once the contract for the command that you would go well we will ask a bank guarantee. Then we deliver your...

groupe horizon

  • 843 - abidjan
  • +22 5 22 47 11 71
  • +225 04619689/49875663
France 59590 B2B Services
DIN ANGLE BELLOWS GLOBE VALVE

Wednesday, September 14, 2016

Quantity : 5000 - Price : 100,00 €

Bellows Seal Stop Valves (Angle Type) DIN Angle Type Bellows Sealed Stop Valve DIN Bellows Seal Globe Valve DIN Faltenbalgventil Eckform DIN Válvulas de fuelle(Paso angular.) DIN ventil uzavírací s vlnovcem rohový DIN Standard seteventil med belg (Vinkel modell) DIN Standardında...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
Taiwan 335000 Audio and Video
photo not available

Saturday, August 01, 2015

ACAFA Full control PC under any OS, in BIOS mode, during boot, at Blue Screens Model: AI101P Single Port KVM over IP Description: The KVM over IP technology (IP-KVM) combines digital remote KVM access via IP networks with comprehensive and integrated system management. The IP-KVM...

ACAFA Information co,Ltd