Equipment goods
Coaxial Wire Stripping Machine
1. Purpose
Establish proper equipment to prevent accidents and ensure the normal operation of equipment and improve work efficiency.
2. Precautions before work
2.1 The status symbol of each equipment shall be marked with the equipment name, equipment number, the initial opening time of the equipment and the department that uses the equipment.
2.2 Check whether the power is connected before work.
2.3 Check whether the working area is clean and in place. If the work site is to be cleaned, power must be turned off to avoid accidents.
2.4 Check whether the connection part of the machine is loose. If found, contact the equipment technician for inspection without delay.
2.5 Staff must be trained before the operation, and they can be hired after training.
3. Matters with attention during work.
3.1 When the machine is turned on, if there is any abnormal sound, please inform the equipment technician for inspection in time.
3.2 The staff shall not be allowed to move, disassemble equipment, test instruments, adjust the parameters set by the equipment. Contact the equipment technician if it is necessary.
3.3 The line should be placed in the middle of the clamps to avoid clamping the line.
3.4 If there is a new type of wire, it needs to be rotated. Firstly, the equipment technician shall adjust the equipment parameters and adjust the optimal state to be operated by the staff.
3.5 If abnormal conditions or abnormal detection results are found in the using process, the application shall be terminated immediately. The equipment technician shall be adjusted, and the calibration can be put into use after the repair.
3.6 Confirmation of deviation of inspection equipment shall be conducted to re-evaluate the products in the past and re-test if necessary.
Location : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu, Contact : Lee Salome, 0086 0512 57169166
Registered since 17 April 2018
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute. We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
Wednesday, May 08, 2024
Quantity : 500 - Price : USD0.5/pc
American Pinch clamps Factory in China The Supplier of one of Fortune top 500 Machine, Technology, Quality from USA SAE Type SEC Stainless Steel Single Ear Pinch Clamps KSL7123 Beverage, automotive, marine, motorcycle and industrial pinch clamps. The patented 300 Series Stainless...
- 233010 - Bengbu
- 86 552 4193229
Saturday, May 11, 2024
Quantity : 100,000 pc
JBI is one of the leading professional screw suppliers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification. Our fasteners...
- jbitwco
- 830 - Kaohsiung City
- +88 6 77 02 10 77
Tuesday, August 11, 2015
One Lus International is a professional gear shift lock manufacturer in Taiwan and provides a series of gear shift lock to meet customer's needs. The electro gear shift lock is easy to operate and convenient to use. The invisible gear shift lock is suitable for automatic & manual...
|