TYPICAL - 2406 ads

Friday, April 08, 2016

Quantity : 1ton - Price : 5 250,00 €

Application 1.Outstanding thermal stability. 2.Non-blooming, good electrical performance. 3.3.Used on PA6,PA66,PBT,PET. Typical Property Appearance Light yellow powder or granules Bromide content（%） 68.7 Volatile（%） 0.3max Soft point（℃) 210max Melting point(℃) 260-320...

Thursday, March 31, 2016

Quantity : 200KG - Price : 10.98USD

Description of shoe soles silicone rubber OTT-X810Liquid Silicone for Insoles is a solvent-free, flow-able - 2 Component RTV Silicone rubber. After mixing the X810 A and X810 B at a mix ratio of 1: 1 the material will cure by an addition reaction at room temperature. The cure rate...

Wednesday, March 30, 2016

Quantity : 200KG - Price : 10.98USD

Features and applications of Anti-yellow Electronic potting addition silicon rubber for encapsulating LED display It is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature...

Tuesday, March 22, 2016

DCPD(DICYCLOPENTADIENE) CAS NO.: 77-73-6 DESCRIPTION DCPD(DICYCLOPENTADIENE) is a kind of Colorless or yellowish Transparent Liquid with analogou s camphor odor, can be used to produce Petroleum Resin,UPR,Adamantane,Pesticide,Flavours and Fragran ces.ect... PERFORMANCE PROPERTIES...

Tuesday, March 22, 2016

BBIT(2-Butyl-1,2-benzisothiazolin-3-one,) elow called BBIT）belongs to a kind of isothiazolone ketones，these compounds have a broad-spectrum antimicrobial effect against bacteria, fungi, yeasts a nd other microorganisms , so it is widely used in industrial circulating cooling water...)

Tuesday, March 22, 2016

Price : 1-1000

WEBSITE: www.haolxfiltration.com TEL: 86-318-7061221 E-MAIL: candy@filter-cn.com Category: knitted wire mesh products Material: knitted wire mesh,stainless steel 304/316/316L Properties: EMI Shielding Products Application: Automotive,EMC,EMI,Engineering,Houseware Wire mesh EMI...

Sunday, March 20, 2016

Table 1 - Optical and Electrical Characteristics Parameter Symbol Min Typical Max Unit Notes Transmitter Centre Wavelength λc 1260 1310 1360 nm Spectral Width (RMS) ∆λ 4 nm Average Output Power Pout -9 -3 dBm 1 Extinction Ratio...

Sunday, March 20, 2016

Description SFP BIDI CWDM 1.25G 40KM Transceiver Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor...

Sunday, March 20, 2016

Parameter Symbol Min Typical Max Unit Notes Transmitter Centre Wavelength λc 1260 1310 1360 nm Spectral Width (RMS) ∆λ 4 nm Average Output Power Pout -9 -3 dBm 1 Extinction Ratio ER 9 dB Optical Rise/Fall Time...

Sunday, March 20, 2016

Parameter Symbol Min Typical Max Unit Notes Transmitter Centre Wavelength λc 1260 1310 1360 nm Spectral Width (RMS) ∆λ 4 nm Average Output Power Pout -9 -3 dBm 1 Extinction Ratio ER 9 dB Optical Rise/Fall Time...

Sunday, March 20, 2016

Description TZRS-DR150(2X)tubing is a high performance, rugged heat shrinkable tubing designed for harsh operating conditions. T h e tubing is made from flexible elastomeric polyester and has a continuous operating temperature range of -55°C (-70°F) to 150°C (302°F). TZRS-DR 150(2X)-A...

Sunday, March 20, 2016

Description SBRS-110G(3X)(4X)NF is a cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior...

Sunday, March 20, 2016

In-line Optical Isolator 1.Optical Isolator utilizes Faraday effect of Magneto optical crystal. It guides optical light in one direction and eliminates back reflection and back scattering in the reverse direction at any polarization sate.The unique manufacturing process and optical...

Sunday, March 20, 2016

Parameter P Grade AGrade Operating Wavelength (nm) 1310 or 1550 Typical isolation (dB) 40 40 Min isolation (dB) 30 28 Insertion Loss (dB) 0.35 0.45 Return Loss (In/Out) (dB) ≥65/60 ≥55/55 Polarization dependent loss(dB) ≤0.05 ≤0.1 Polarization...

Saturday, March 19, 2016

Quantity : 7000 - Price : $1.13

The MSP430G2x52 and MSP430G2x12 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface and have...

Saturday, March 19, 2016

Quantity : 6000 - Price : $0.5

The MSP430G2x32 and MSP430G2x02 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface. The MSP430G2x32...

Tuesday, March 15, 2016

Quantity : 200kg - Price : 8.85usd/kg

Description of translucent silicone rubber for shoe insole translucent silicone rubber for shoe insole is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the X810 A and X810 B at a mix ratio of 1: 1 the material will cure by an addition reaction at room temperature...

Saturday, March 12, 2016

Quantity : 6000 - Price : $0.72

The MSP430G2x52 and MSP430G2x12 series of microcontrollers are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, and up to 16 I/O capacitive-touch enabled pins and built-in communication capability using the universal serial communication interface and have...

Saturday, March 05, 2016

Quantity : 6000 - Price : $2.95

The MSP430F23x, MSP430F24x(1), and MSP430F2410 series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter (not MSP430F24x1), a comparator, four (two in MSP430F23x) universal serial communication interface (USCI) modules, and up to 48 I/O pins...

Saturday, March 05, 2016

Quantity : 6000 - Price : $1.5

The MSP430F22x4/MSP430F22x2 series is an ultra-low-power mixed signal microcontroller with two built-in 16-bit timers, a universal serial communication interface, 10-bit A/D converter with integrated reference and data transfer controller (DTC), two general-purpose operational amplifiers...

Saturday, March 05, 2016

Quantity : 20000 - Price : $0.4

The MSP430G2x01 and MSP430G2x11 series is an ultralow-power mixed signal microcontroller with a built-in 16-bit timer and ten I/O pins. The MSP430G2x11 family members have a versatile analog comparator. Typical applications include low-cost sensor systems that capture analog signals...

Thursday, March 03, 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Thursday, March 03, 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Thursday, March 03, 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Saturday, February 27, 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Saturday, February 27, 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Saturday, February 27, 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Wednesday, February 24, 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...

Wednesday, February 24, 2016

Appearance White Paste 200~300(1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0(%) (200℃, 8h) Volatile ≤1.0(%)(200℃, 8h) Breakdown Voltage Strength ≥10(kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2(w/m.k) 1 kg/tank, 10kg/barrel, 80g/branch...

Wednesday, February 24, 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)