Silicone encapsulated adhesive for power source
Before The Curing
| Performance Indicators | A | B |
| Appearance | Gray Fluid | White Fluid |
| Viscosity | 1500~2500(cps) | 1500~2500(cps) |
| A: B | 1: 1 | |
| Mixed Viscosity | 1500~2500(cps) | |
| Operable Time | 30~120(min) (Adjustable) | |
| Curing Time | 3~5(h) | |
After The Curing
| Hardness | 40~50(Shore A) |
| Dielectric Strength | ≥20(kV/mm) |
| Dielectric Constant | 3.12(1.2MHz) |
| Thermal Conductivity | ≥0.6[W/m.k] |
| Volume Resistivity | ≥1.0×1014(Ω·cm) |
| Specific Gravity | 1.56±0.02(g/cm3) |
| Flammability Rating | UL94 V-0 |
•20kg/set(A10kg+B10kg), packaging with bucket.
![]()
1. Features
ZS-GF-5299E is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which can be applied for PC (poly-carbonate), PP, ABS, PVC and other surface of metal. Complied with the ROHS, REACH of EU directive.
2.The Typical Application
Encapsulating and protecting the power module, or other electronic components.
3. Instructions
•Preparing: Stir completely A and B in each container,
•Mixing:A and B should be fully mixed according to the weighting ratio. Add B to A. Stirring(stir the glue dedicated blade) and mixing. Note that: should be mixed thoroughly when mixing the wall rubber of container into the plastic material.
•De-airing: after mixing which should vacuum degassing for 1-3 minutes.
•Potting: The mixture should be poured into the product as soon as possible, in order to avoid thickening and resulting in poor fluidity.
•Curing: Heat curing or at room temperature curing. The higher the temperature, the quicker curing. The temperature is low, the curing time will be extended either. In winter, it will take a long time to cure, so suggest that heating curing. It is cured for 15 minutes at 80 ° C ~ 100 ° C, about 12 hours at room temperature.
4. Storage
•1 year shelf life if stored below 25 ℃, when the product passed its expiration date, it should be confirmed without abnormal phenomenon, then that can be used.
•These products don't belong to dangerous goods, so they can be transported as normal chemicals. But be careful of leakage.
5. Note
•The mixture should be sealed and stored in a dry environment at room temperature, and should be used as soon as possible, to avoid wastage.
•The product don't belong to dangerous goods, but avoid contacting skin and eyes.
•The product is non-toxic, has good physical inertia without stimulation and harm. The product does not contain flammable and explosive ingredients which will not cause fire or explosion without special requirement for transport.
•Stored for a period of time, the plastic may be layered. So please stir well before using, and can't affect its performance.
•The following substances may hinder the curing or cause the phenomenon of not cure, so it is used after simple experiments, and need to clean the site of application if necessary.
A. incompletely cured condensation type silicone rubber.
B. amine (amine) curable epoxy resin.
C. ash welding, solder flux .
![]()
Contact : jiang selina, +086 0769 88888312
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Silicone encapsulated adhesive for power source Search in a category : Stock lots Search in a category : power, source, adhesive, silicone, encapsulated |
Tuesday, July 18, 2023
Quantity : 1 - Price : 5 200,00 €
We sell new original Bikes, Framesets, Groupsets & Accessories, please choose the bike you want from our store and get discounts and free shipping. For information and purchases visit our website: www.warehousebike.com Buy 2023 Pinarelo F7 Disc Ultegra Di2 Road Bike at Warehousebike...
WAREHOUSEBIKE
- 20241 - Medan
- +6282161909837
Tuesday, September 07, 2021
Quantity : 50 Pcs - Price : USD 3,173.00
Buy 2021 - BMC Road Bike Teammachine SLR ONE Force ETAP AXS HRD from Runcycles is 100% safe, Because purchase products at Runcycles provide a 100% money back guarantee. Location Runcycles : Jl. T.Amir Hamzah Blok B/5.Medan. Contact us : order@runcycles.com, To purchase online visit the website ...
RUNCYCLES
- 20124 - Medan
- +6281262962563
Saturday, January 12, 2019
Quantity : Cosmétiqu
The Nut Cosmetics was founded to take care of the well-being of the mind, body and spirit with the best that Mother Earth has to offer us. Our products are free from harmful chemicals and animal testing. All ingredients are of vegetable origin from suppliers of quality and trust....
Nut Cosméticos
- 60165085 - Fortaleza
- 5585991874796



