Bluetooth Finger Pulse Oximeter Heart Rate SpO2 Sleeping Monitor Sapphire DB12

Item specifics
Brand name : EaseAi Item Type: Finger Pulse Oximeter
Material: ABS Size: 63mm(L)*36mm(W)*35mm(D)
Application: Finger Commodity Quality Certification: CE
Model Number: Bluetooth DB12 Power: 2 x AAA 1.5V alkaline battery
Weight-approx: 70g Color: Sapphire
Parameter: SPO2 PR PI Display Modes: 6 directions
Warranty time: 5 years
Product Description:
Because of the aviation restrictions, batteries are not included in the package, please use alkaline battery to run it .
Brief Device Description:
The Oximeter can be used to measure human Hemoglobin Saturation and pulse through finger. The product is suitable for family, hospital (including clinical use in internist/ surgery, pediatrics, etc), Oxygen Bar, social medical organizations, physical care in sports and etc.
It is not for intensive care or person whose finger is injured.
Product Features
Widely used at home, medical institutions and community centers, etc.Accurately measure SPO2 and PR display, waveform, bargraph and PI display.Low battery indicator.Low power consumption; Auto power off when no signal.Pulse sound function.Alarm function.Small in size and light in weight.Bluetooth connection.
Attention: The APP is only suitable for Android mobile phones.
Specifications
Display Mode: OLED display
SpO2
Measuring Range: 35%-100%
Resolution: ±1%
Accuracy: ±2% (80%-100%), ±3% (70%-80%), unspecified (<70%)<br /> Pulse rate (PR)
Measurement range: 30~250 BPM
Resolution: ±1%
Accuracy: ±2BPM
Power: 1.5V (AAA size), alkaline battery x 2
Working current: < 30mA
Perfusion Index Display: 0-30%
Accuracy: ±1% (0-20%), unspecified (20%-30%)
Automatic power-off: Automatically power off when no signal in the oximeter for more than 8 seconds
Package Content
- 1 x Finger Pulse Oximeter
- 1 x Lanyard
- 1 x English user manual
- 1 x Carrying case
Operation
install battery
Installing two AAA batteries into battery cassette in correct polarities and put cover back on.
start the Pulse Oximeter
Put one of fingers into rubber hole of the oximeter (it is best to put the finger thoroughly) with nail surface upward, then releasing the clamp.
Press the key, oximeter will automatic standby or go asleep after 8 seconds without finger in it.
Attention: This product is only suitable for those over ten years old.