ACREL DJSF SERIES DC ENERGY METER
Quantity : 10000piece Price : 5-500USD/piece
Acrel DJSF Series modbus dc power meter with double channels DC input is mainly designed for telecom base station, DC charging pile, solar photovoltaic and other applications. This series of meters can measure voltage, current, power and positive and negative energy in the DC system.
DJSF Series DC Energy Meter For Sale
● RS485 communication, Modbus-RTU protocol ● kWh, kVarh, Power, Current, Voltage measure ● suitable for Charging Pile; Solar PV, battery system ● two channel dc circuits, event recording, max demand
DJSF1352-RN Din Rail kWh Meter DC
DJSF Series DC Energy Meter Datasheet
|
Technical parameters |
Indicators |
||
|
Input |
Nominal value |
Voltage input range |
Current input |
|
DC 0-1000V |
Shunt：0-75mV； |
||
|
See the physical wiring diagram |
Hall sensor：0-20mA、4-20mA、0-5V，0-10V and so on. |
||
|
Overload |
1.2 times rated (continuous); 2 times rated/1 second; |
||
|
Power consumption |
Voltage: ≤0.2VA, current ≤0.1VA |
||
|
Accuracy class |
Class 1 |
||
|
Function |
Display |
8-bit segment LCD screen (LCD) |
|
|
Communication Interface |
RS485, infrared |
||
|
Communication protocol |
Modbus-RTU, DL/T 645-2007 |
||
|
Switch |
Switch output |
2 Relay outputs, 2A/30VDC or 2A/250VA |
|
|
Switch input |
2 dry contact inputs |
||
|
Pulse output |
A second pulse output, a energy pulse output |
||
|
See the SYS->PLUS display in the meter menu setting |
|||
|
For example: The meter displays 100, which is 100imp/kWH |
|||
|
Power Supply |
Voltage range |
AC/DC 85-265V or DC24V(±10%) or DC48V(±10%) |
|
|
Power consumption |
≤ 3W |
||
|
Power frequency withstand voltage |
Power supply // Voltage input // Current input // Relay output and switch input // Communication interface / / Pulse output 3kV/1minPower supply // Relay output // Voltage input // Current input 3kV/1minPulse output // Communication interface // Switch input 2kV/1min |
||
|
Insulation resistance |
≥ 40M Ω |
||
|
Average barrier-free working hours |
≥50000h |
||
|
Environment |
Temperature |
Normal operating temperature: -25 °C ~ +65 °C; |
|
|
Limit working temperature: -40 °C ~ +70 °C; |
|||
|
Storage temperature: -40℃～+80℃ |
|||
|
Humidity |
≤93%RH, no condensation, no corrosive gas |
||
|
Altitude |
≤2500m |
||
How Does A DJSF Series DC Energy Meter Work?
DJSF1352-RN has two channels dc circuits input. The input voltage shall not be higher than 120% of the rated input voltage of the product. 1A fuse shall be installed at the voltage input end. The current input should be external shunt or Hall current sensor. The instrument provides RS485 communication interface and supports Modbus-RTU protocol. Theoretically, up to 128 instruments can be connected on a line at the same time. Each instrument can set its Addr and baud, and also can be selected by setting.
DJSF Series DC Energy Meter FAQs
what is a DJSF DC energy meter?
DJSF dc energy meter with rs485 is designed for DC screen, solar power supply, telecom base station, subway and other applications.
how does a DJSF DC energy meter work?
The DC voltage and the DC current are measured separately with two DMM, and the results are multiplied to get the DC power.
How does a DJSF energy meter Installation?
use 35mm guide rail which is convenient and quick to install.
Which signal input does DJSF dc energy meter support?
voltage supports 1000V input, current supports shunt (0-75mV), Hall sensor (0-20mA, 4-20mA, 0-5V) access.
Now the price of power meter for solar panels is low, if you are interested, please contact us.
Contact : Tim MA, 86 510 86179966
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of ACREL DJSF SERIES DC ENERGY METER Search in a category : Electronics / Computers Search in a category : meter, series, djsf, energy, acrel |
429 B2B ServicesReport abuse
Tuesday, January 06, 2026
<< Stable Operations, Continued Growth >> 5 Axis Machining Center-Eumach Co., Ltd. Eumach Co., Ltd. is a fresh business of machine tool industry, and concentrates on manufacturing 5 axis machining center, vertical horizontal machining center, universal milling machine...
Eumach Co., Ltd.
- 429 - Taichung City
- +886 4 2581 0031
414 Cosmetics and beautyReport abuse
Monday, March 07, 2016
Bubble Bath Spa Massager MSW-104 Bubble Bath Spa Massager is a new generation of home spa massager and is optimized for use in bath with the quality of tranquility, relaxing and luxury life. Configuration of MSW-104 is One-Touch Control Panel with Minimal and fashionable design...
LienJie International Ltd.
- 414 - Taichung City
- +886 4 23367128
233010 Cosmetics and beautyReport abuse
Tuesday, January 06, 2026
Quantity : 500 - Price : USD0.5/pc
American Pinch clamps Factory in China The Supplier of one of Fortune top 500 Machine, Technology, Quality from USA SAE Type SEC Stainless Steel Single Ear Pinch Clamps KSL7123 Beverage, automotive, marine, motorcycle and industrial pinch clamps. The patented 300 Series Stainless...
King Seal Fastener Technology(Anhui) Co., Ltd.
- 233010 - Bengbu
- 86 552 4193229
