Electronics / Computers

Wall mounted clamp on doppler ultrasonic flowmeter for dirty water

Product Description
DF6100-EC Wall-mounted Doppler Ultrasonic Flowmeter (Clamp-on)
1. Lanry Doppler Clamp on Ultrasonic Flow Meter for Liquid Mud is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a certain amount of air bubbles or suspended solids in liquid.
2. Lanry Doppler Clamp on Ultrasonic Flow Meter for Liquid Mud can display flow rate and flow totalizer, etc., and is configured with 4-20mA, Relays,OCT outputs.
Features
--- It is suitable forpipe sizes ranging from 40 to 4000mm
--- For dirty liquids, a certain amount of air bubbles or suspended solids shall be contained
--- Excellent low flow rate measurement ability, low to 0.05m/s.
--- A wide range of flow measurement, high flow rate can reach 12m/s
--- High-temperature transducer is suitable to liquids of -35℃ ~ 200℃
--- Do not need to shut down the pipe flow when installing the transducers
--- User-friendly configuration
--- 4-20mA, Relay and OCT outputs
--- Accuracy: 2.0% Calibrated span
The specification of Transmitter
Measurement principle
Doppler ultrasonic
Resolution
0.25mm/s
Repeatability
0.2% of reading
Accuracy
0.5% -- 2.0% F.S.
Response time
2-60s for optional
Flow Velocity Range
0.05- 12 m/s
Liquid Types Supported
Liquids containing 100ppm of reflectors and at least 20% of the reflectors are larger than 100 micron.
Power Supply
AC: 85-265V DC: 24V/500mA
Enclosure type
Wall-mounted
Degree of protection
IP66 according to EN60529
Operating temperature
-20℃ to +60℃
Housing material
Fiberglass
Measurement Channels
1
Display
2 line × 8 characters LCD, 8-digit rate or 8-digit total (resettable)
Units
User Configured (English and Metric)
Rate< /div>
Rate and Velocity Display
Totalized
gallons, ft³, barrels, lbs, liters, m³,kg
Communication
4-20mA,Relay and OCT output
keypad
4pcs buttons
Size< /div>
244(h)*196(w)*114(d)mm
Weight
2.4kg
The specifications of Transducer
Transducers Type
Clamp-on
Degree of protection
IP65. IP67 or IP68 according to EN60529
Suited Liquid Temperature
Std. Temp.: -35℃~85℃ for short periods up to 120℃
High Temp.: -35℃~200℃ for short periods up to 250℃
Pipe diameter range
40-4000 mm
Transducer Size
60(h)*34(w)*32(d)mm
Material of transducer
Aluminum for standard temp.sensor and peek for high temp.sensor
Cable Length
Std: 10m
Application< /div>
Activated sludge
Ground water
Pulp and paper slurries
Chemical slurries
Drainage
Mining recirculation
It is widely used in fully filled pipe ( non-instrusive )
Factory Equipment
<s
Location : sales3@lanry-flow.com, 201612 shanghai,
Contact : Linda Lee, 862167618991

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Wall mounted clamp on doppler ultrasonic flowmeter for dirty water

Search in a category : Electronics / Computers
Search in a category :
flowmeter, mounted, clamp, doppler, ultrasonic, wall, dirty
Vietnam 700000 Furnitures
Imitation Rattan chair - QP 254

Tuesday, April 28, 2026

Quantity : 720

PLASTIC IMITATION RATTAN CHAIR Aluminium chair with rattan strings. Solid and stable frame in imitation of bamboo (aluminum tube with wall thickness 2 mm) and rattan seat (artificial rattan headed inside hardened steel wire). Model: Rattan. Material: PP. Usage: Interior/out door...

Qui Phuc Company Limited

  • Luck06
  • 700000 - Ho Chi Minh
  • +84 9 86 58 28 62
France 59590 B2B Services
Y STRAINER

Wednesday, September 14, 2016

Quantity : 5000 - Price : 50,00 €

Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
Morocco 52200 Decoration
Bottle holder fossilized marble

Tuesday, April 28, 2026

Our products are cut from a fossilized marble dating back to the Paleozoic era (450 million years). Our craftsmen have taken great care and ancestral know-how when extracted, its size and its polishing highlighting ammonites and Orthoceras that compose it. A mission all the more important...

la pierre d'erfoud sarl