Everything else / Bulk

UAV Motor Series

Price : 100USD

Direct mount propeller or Hub style compatible

Multi-length mounting hardware included

High Power N42sh magnets

Precision NMB bearings

12v Brushless Motor Series

Motor efficiency is typically calculated by dividing thrust by power at 100% throttle, measured in gram/watt. The higher this number is, the more efficient the motor.

High thrust drone motors are important to look at efficiency through the whole throttle range though, not just the top end. Some motors might be efficient at lower throttle but could lose efficiency by drawing increasingly higher current as they approach their limits.

With less efficient motors not only are you wasting energy and flight time, your batteries might also suffer from voltage sag, this effect will be compounded if you are using poor quality LiPo batteries.

Remember that Watt is calculated by multiplying voltage and current, as we know the voltage of the battery we will be using. Another good way to look at efficiency is to use gram/amp (thrust/current).

Generally, the more thrust generated, the larger the current drawn to produce that thrust, so uav motor with high thrust and low current are preferred. Inefficient motors either generate too little thrust or draw too much current.

If you want your plane to fly longer, we suggest that you consider these motors.

U series motors are designed specially for long flight time drones. These motors are highly efficient, light, and run smoothly.

With the guarantee of strength, the caps of U motors are highly hollow-cutted to save weight, so that these motors can reach maximum thrust to weight ratio and gain more flight time.

U series motors are tested with the strictest procedures of TTF's QC protocols. Each of these motors are dynamically balanced with our high-test standard. The axial and radial runouts of each rotor are tested strictly

Features:

• High Power N42sh magnets

• Precision NMB bearings

• 0.2mm laminations for optimal efficiency

• Ample cut to length motor wires for a clean install

• Direct mount propeller or Hub style compatible

• Multi-length mounting hardware included

U2212/ U3506/ U5208 motors are applicable for 300-500mm class multirotor.

Shenzhen TitanFlying Technology Co., Ltd (TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. We provide drone frame kit, fastest drone motors and etc. For more information, please feel free to contact us!

Location : NO.15 Chaoyang road, Yanluo street, Songgang town, Baoan District, Shenzhen , 518055 Shenzhen,
Contact : flying titan, +75 5 21 53 90 34

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
UAV Motor Series

Search in a category : Everything else / Bulk
Search in a category :
series, motor
France 13500 Women clothing
435 Party/Coctail Dress

Sunday, February 08, 2015

Quantity : 435 - Price : 25 € /pièce

Lot de 435 Robes de soirées, Magnifiques 25 € TTC pièce, Made in Turkey, Rapport qualité/prix imbattable Référence DSCTK-SH435RDS État Nouveau Vendu par 1 lot de 435 articles, des dizaines de modèles différents Articles neufs, modèles 2014, en grande partie sériés 38 au 44 ou 38 au 48 Prix ...

BOULEVARD MODE

  • 13500 - Martigues
  • +33 6 52 74 64 10
France 69730 Decoration
LOT DE DRAP BLANC

Sunday, December 22, 2024

Quantity : 20 000 PIE - Price : 2,50 EUROS

LOT DE DRAP BLANC POLYCOTON QUALITE EUROPEENNE Quantité : 20 000 pièces Prix : 2,50 EUROS Deux dimensions : 200 x 335 - 270 x 335 Bonjour, Nous sommes la société S.D.P.I.E : SOLDEUR Notre activité consiste en le rachat et la vente de lots. DESTOCKAGE D'UN LOT DE DRAP BLANC...

S.D.P.I.E

  • discount-pro
  • 69730 - GENAY
  • +33 4 72 35 91 51
  • +33 6 09 42 11 81
Taiwan 428 B2B Services
Focus CNC Co., Ltd.

Wednesday, January 13, 2016

Established in 2000, Focus CNC Co., Ltd. provides series of CNC Lathe Machinery, CNC Lathe, live tool CNC Lathe, mill turn Lathe and CNC turning machine. Due to our principle of “Humanity, Technology and Precision” in mind, we keep breaking through to become one leading Industry...

Focus CNC Co., Ltd.