Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB

FEATURES OF GOLOHO-4313-AB

Flammability,UL-94V0 certificationExcellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivityMix ratio 1: 1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module. Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within. rtv grease

• Description

GOLOHO-4313(W)-AB is a two part silicone adhesive flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .

HOW TO USE GOLOHO-4313-AB

• Stirred thoroughly before mixing
• Mixed in 1: 1 ratio by weight
• Agitation: mixed thoroughly by low speed agitation
• Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
• Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
• Curing 1: curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
• Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes

TECHNICAL DATA OF GOLOHO-4313-AB

OTHER CAUTIONS OF GOLOHO-4313-AB

• Curing processing will be prevented if contact with condensed silicone rubber and gas released, N, P, S, heavy metal chemicals
• Wear an eye-patch and gloves during operation, keep the environment be ventilated
• Packaging: A, 25kg, B, 25kg
• Storage: shelf life is 6 months when it stored in cool dry place under the condition of 22℃ and RH<55%. Keep out of the reach of children.</li>
• Without notice, the contents of this article may be changed due to the product performance improvement and specification.
• We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
• Our products are developed for general industrial use.
• Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389