B2B Services
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
FEATURES OF GOLOHO-4313-AB
Flammability,UL-94V0 certificationExcellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivityMix ratio 1: 1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module. Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within. rtv grease
GOLOHO-4313(W)-AB is a two part silicone adhesive flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .
HOW TO USE GOLOHO-4313-AB
- Stirred thoroughly before mixing
- Mixed in 1: 1 ratio by weight
- Agitation: mixed thoroughly by low speed agitation
- Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
- Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
- Curing 1: curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
- Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes
TECHNICAL DATA OF GOLOHO-4313-AB
Model
|
GOLOHO-4302W(G)-AB
|
Uncured
|
A
|
B
|
Appearance
|
White(grey), Flowing
|
白色流动状White, Flowing
|
g/cm3 Density
|
1.60±0.1
|
1.60±0.1
|
Viscosity cP
|
4000±500(25℃)
|
4000±500(25℃)
|
Mix ratio(weight/volume)
|
1
|
1
|
Cured mechanical properties
|
Working time (25℃)h
|
1
|
Cure conditions
|
|
Durometer JIS A
|
50±5
|
Tensile strength MPa
|
>1.0
|
Elongation %
|
>70
|
Thermal conductivity W/m·K
|
0.6~0.8
|
Flammability
|
UL94V0
|
Electrical properties
|
Volume resistivity Ω﹒cm
|
>1×1014
|
Dielectric strength kV/mm
|
20
|
OTHER CAUTIONS OF GOLOHO-4313-AB
- Curing processing will be prevented if contact with condensed silicone rubber and gas released, N, P, S, heavy metal chemicals
- Wear an eye-patch and gloves during operation, keep the environment be ventilated
- Packaging: A, 25kg, B, 25kg
- Storage: shelf life is 6 months when it stored in cool dry place under the condition of 22℃ and RH<55%. Keep out of the reach of children.</li>
- Without notice, the contents of this article may be changed due to the product performance improvement and specification.
- We just only ensure the specifications of our products. You have to test the product before using to conform if it is suitable for your use.
- Our products are developed for general industrial use.
- Please contact the company's customer service if you want to reprint the contents of the products. Customer service hotline: 0519-85610389
Location : No.200, Chuangxin 2 Road, Xinbei District, Changzhou, Jiangsu, 213000 changzhou, Contact : Chen Neil, 0519 85108032
Registered since 06 May 2019
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute. We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
Search in a category : B2B Services Search in a category :
ratio, potting, silicone
|
Sunday, July 12, 2015
Quantity : 1 - Price : 2 000,00 €
Options: 1.imported 4 hole high speed air turbine hand piece 2.imported 4 hole low speed air turbine hand piece 3.Endoscope system 4.Ulerasonic scaler 5.curing light Location : Foshan City , 528500 Foshan , Contact : Nature Mai Mai , +15 0 19 61 17 04
- 528500 - Foshan
- +15 0 19 61 17 04
Friday, May 16, 2014
Quantity : 500000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Saturday, April 02, 2016
We are the first patented waterproof LED Corn light in China. LED Replacement Lamps for Metal Halide / High Pressure Sodium/High Intensity Discharge/CFL Material Private mode 6063 Aluminum thermal structure; High quality aluminum processing technique; Special su rface treatment process...
- 518103 - shenzhen
- +86 755 18682173476
|