Storage and use of water-based aluminum paste
1. After soaking the slurry for a few minutes, add the water-based base material while stirring to observe its dispersibility. You can add a dispersant appropriately to ensure that no clusters or particles are precipitated.
2. Please do not use a high speed during the stirring process, so as to avoid high shear force damage the coating layer of the aluminum pigment, it is recommended that the speed be controlled at 300-800rpm.
3. In order to achieve the best application effect, it is best to filter the water-based paint before use. It is recommended to spray the viscosity (Iwata 4# cup) for 15-25 seconds.
4. If stored for a long time, the silver paste may partially agglomerate, but it will not affect the use. It can be soaked in pure water or ether for a few minutes before use, and it will be dispersed after slight stirring.
5. Storage conditions: Please avoid direct light, and seal the material in time after taking the material.
Recommendations for water-based paint formulations (for reference only)
1. Water-based plastic paint (applicable to the manufacture of various self-drying low-temperature baking plastic paints)
Waterborne resin 70%
Water 10-20%
Water-based aluminum pigment 10%
The following additives are added according to the requirements of the water-based resin system
Film forming aid 7.0%
Oxidized polyethylene wax 2.0%
Wetting agent 0.3%
Defoamer 0.3%
Dispersant 0.2%
Thickener 0.2%
After the above ratio is completed, it can be sprayed directly, and the spray viscosity can be adjusted with thinner to achieve the best spraying effect.
2. Water-based metallic glass paint (applicable to the manufacture of various low-temperature baking glass-metal paints)
Waterborne resin 70%
Water-based aluminum pigment 10%
Water 10-20%
The following additives are added according to the requirements of the water-based resin system
Defoamer 0.2%
Wetting agent 0.2%
Leveling agent 0.1%
Film forming aid 7.3%
Thickener 0.2%
After the above ratio is completed, it can be sprayed directly, and the spray viscosity can be adjusted with thinner to achieve the best spraying effect.
Contact : Gideon hu, +13 5 90 97 39 64
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Storage and use of water-based aluminum paste Search in a category : Raw materials Search in a category : water, storage, paste, aluminum, based |
Tuesday, July 12, 2016
Quantity : 1 - Price : 15390USD
Double Stage Vacuum Insulation Oil Regeneration Purifier VFD-R-50 flow rate: 3000L/H Introduction VFD-R series double-stage high efficiency vacuum insulation oi regeneration purifier is adapt to regenerate and activate the deteriorated transformer oil. It is capable of removing...
Sino-NSH Oil Purifier Manufacture Co. Ltd.
- sinonsh315
- 400020 - Chongqing
- 0086 023 62504172
Wednesday, July 01, 2015
Specification: l Ankle-brachial index(ABI),Toe-brachial Index ,segment exams, automatics calculation of th e indices l Control mode: automatic cuff inflation/deflation and hand-held controller l Wave mode: Bi-directional Doppler, pulse volume recording(PVR), photoplethysmography(PPG)...
Shenzhen Bestman Instrument Co., LTD.
- 51800 - Shenzhen City
- 0086 755 26411423
- +86 18676369813
Thursday, May 02, 2024
15 inch Six Standard parameters: ECG, RESP, NIBP, SPO2, 2_TEMP, PR/HR 1.13 Type Arrhythmic Analysis, Multi-Lead ECG Waveforms Display in Phase, Real time S_T segment analysis, pacemaker detection Drug calculation and titratiotable; 2. Efficient resistance to interference of defibrillator...
ARI Medical Technology Co.,Ltd
- 230000 - Hefei
- 86 755 27196156