Stock lots

Silicone Prototyping

Soft Rubber rapid prototype, Hardness is generally between shore A 30~90 degrees, because soft rubber plastic prototype has flexibility, it is widely used in the rapid prototype industry. The processing method of soft plastic rapid prototype is relatively single, and it can only be processed by vacuum Casting - that is use 3D printing or CNC processing to do a prototype, and then use vacuum casting /silicone mold to copy the prototype, generally a prototype can be copied 15~20 time.

Silicone Prototyping Material Properties

In the general plastic industry, PP, PE and other light gravity, material surface hardness is relatively low plastic known as soft glue. And PS, ABS, AS, hard PVC and other plastics can be called hard glue.

Heat resistance properties

Silicone products are silicon - oxygen (Si-O) key chain structure, C-C bond energy of 82.6 kilocalories/gram molecule, Si-O bond energy in silicone is 121 kilocalories/gram molecule, so the thermal stability of silicone products is high, high temperature (or radiation) molecular chemical bonds do not break, do not decompose. Silicone not only can withstand high temperature, but also low temperature, can be used in a wide temperature range. Both chemical and physical mechanical properties change very little with temperature.

Silicone cast prototypes Material Info

Brief introduction

Soft prototype silicone rubber parts is mainly processed by the way of silicone compound mold, its advantages are fast time, less cost, good operation, no deformation, no shrinkage, easy to dismantle the mold, the mold surface is smooth, the simulation effect is good, the probability of processing failure is small. 10-20 pieces of the same product can be copied by using a silica gel mold. Generally, a set of silica gel mold can only be done about 10-20 times and can not be used. Reuse can produce deformation and large size error. Soft rubber hand model because of these excellent properties, so its application is very wide, Soft rubber hand model production steps can be divided into three steps, before making silica gel mold, first of all to make a prototype, the prototype can use the more common ABS material, can be made by CNC processing or 3D printing; After the original is ready, began to make silica gel mold, after curing, the silica gel mold is cut, take out the prototype, at this time the silica gel mold is ready; The liquid material is injected into the silica gel mold and dried. The service life of the silica gel mold is about 10-20 times. In the raid prototype industry, as long as the soft adhesive material is PU 8400.

For more information about types of rapid prototyping and product design prototype, please feel free to contact us!

Location : Room 611, JiaYu building, Hong xing Area,Songgang Street, Baoan district, Shenzhen 518105, 518105 shenzhen,
Contact : ping gjprototy, 0755 23355414

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Silicone Prototyping

Search in a category : Stock lots
Search in a category :
prototyping, silicone
Thailand 5000 Food
Hulled HEMP SEEDS

Saturday, February 20, 2016

Quantity : 100 MT PER - Price : 2000 usd per mt CIF

Hemp seeds Product Name: Hemp seed extract Latin Name: Cannabis sativa L Appearance: Brown yellow powder Part used: Seed Application: Health-care products Shelf Life: 24(month) Name Hemp Seed Botanical source Cannabis sativa L. Specification 3.5mm belwo,3.5-5.0mm...

Khun Jack Partnership Ltd

  • 5000 - Chaing Mai
  • +66 9 68 75 20 43
Thailand 15140 Food
Refined Granulated Sugar (ICUMSA 45)

Thursday, July 16, 2015

WHITE REFINED CANE SUGAR ICUMSA 45 SPECIFICATION: FIT FOR HUMAN CONSUMPTION POLARIZATION: 99,80 % MINIMUM MOISTURE: 00.04% MAXIMUM SULPHATEASH CONTENT: 00.04% MAXIMUM GRANULATION: MEDIUM TO FINE SOLUBILITY: 100% DRY AND FREE FLOWING RADIATION: NORMAL W/O PRESENCE OF CESIUM OR IODINE...

TRADEX GROUP CO LTD

  • 15140 - opburi
  • +6661409539
France 361002 Second hand goods
China Professional Injection Mould

Friday, May 16, 2014

Quantity : 5000sets - Price : $1000-5000/set

Injection Molding Description Description: 1.Mould Base: HASCO, DME, RABUDIN, DIN, JIS, LKM. 2.Mould Core: 718,S136,P20,NAK,LKM,EK4,X13T6W etc. 3.Hot runner: Mold-masters,Master Tip,Husky,Hasco,DME,Yudo,Incoe,Thermopla y etc. 4.Standard Parts: DME,HASCO,NEAREST ANSI STANDARD...

Xiamen Karo Co.,Ltd