Safety Precautions Of Using Bottle-Top Dispenser
The bottle-top dispenser is intended to be used as a general lab tool mostly in the petrochemical and biological industry. Certain safety precautions have to be observed to prevent personal injury and property damage.
Proper Operation
Before using a bottle-top dispenser, it must be ensured that the inlet valves and outlet tubes and all the other valves are properly installed and tightened. During the operation, the outlet tubes should always be avoided facing the operator directly. If there is any error occurs, remember to stop immediately instead of the violent operation. In this way, further damage to the instrument can be avoided. After the operation, it is necessary to fasten the caps of the outlet tubes, which ensures no solutions dripped out from it if any left in the tubes.
Maintenance
To guarantee its excellent performance, the bottle-top dispenser should be cleaned regularly and perform the periodical inspections. If the solutions get stuck on the valves, the first thing needs to be done is to soak it in the cold water or clean it with the ultrasonic washing instrument. If repair is required, consult to the dealer or manufacturer of the bottle-top dispenser.
Disposal precautions
To dispose of the bottle-top dispenser as industrial waste in conformance with the Factory Instructions or Specification.
Contact : Bruce Lu, +86 29 89284429
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Safety Precautions Of Using Bottle-Top Dispenser Search in a category : Everything else / Bulk Search in a category : bottle, safety, dispenser, precautions |
Tuesday, April 14, 2026
♦ Functions * 2-channel temperature monitor * 1-channel fan speed control * Run time function * Fan fault alarm * Temperature fault alarm * Fan speed storage function * Auto fan speed control → 40°C: Low 50°C: Middle 60°C: High * Immediate visual indication of Fan/HDD...
Tengda Electronics Limited
- simeongao
- 518102 - hongkong
- +85 2 21 10 18 65
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Saturday, August 01, 2015
ACAFA Full control PC under any OS, in BIOS mode, during boot, at Blue Screens Model: AI101P Single Port KVM over IP Description: The KVM over IP technology (IP-KVM) combines digital remote KVM access via IP networks with comprehensive and integrated system management. The IP-KVM...
ACAFA Information co,Ltd
- wendy2015
- 335000 - Taoyuan
- +88 6 33 07 13 00





