RPS-L11M Radio Probe System
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M Radio Probe System
RPS-L11M radio probe system contains TP200 touch probe, RPDM transceiver, RSI-20M receiver and standard measuring software, applied in lathe probe, multi-tasking machines probe and turning machine probe. The RPDM is a radio frequency probe designed to be turret-mounted for part setting and inspection on turning centres. RPS-L11M radio probe system is for workpiece inspection and job set-up on multi-tasking machines, lathes and turning machines.
RPS-L11M Radio Probe System
TP200+RPDM: |
|
Measuring direction |
±X,±Y,+Z |
Arbitrary direction swinging angle |
X-Y±15°, Z +5 mm |
Repeatability (2σ) |
≤ 2 μm; |
Trigger force in Z direction |
600±30(g) |
Trigger force in X-Y direction |
50-100(g) |
Radio signal receiving/sending distance |
>14m |
Model of the standard stylus |
M4-P50-RB6-S36 |
Model of the battery |
14250,3.6 (V), 2 Pcs |
Seal grade |
IP68 |
RSI-20M |
|
Radio signal receiving/sending distance |
>14m |
Frequency of the radio signal |
2.4-2.483G |
Quantity of the radio channel |
16 |
Input voltage |
24±10% VDC |
Output load current |
50mA |
Length of the cable |
8m |
Length of the cable retaining tube |
2m |
Seal grade |
IP68 |
Application of RPS-L11M Radio Probe System
RPS-L11 is for workpiece inspection and job set-up on multi-tasking machines and lathes.
PRS-L11 often used in turning machine to measure workpiece and set datum point.
It provide automated on-machine measurement of component position and alignment. Set up faster, improve quality and reduce scrap.
Technical Characteristics of RPS-L11M Radio Probe System
The stylus connector of TP200 probe is protected by a metal cover and a rubber seal cover;
Switch on/off method of RPD/RPDM radio signal emitter: M code on/off;
Radio code signals are used to transmit information between RPD/RPDM radio signal emitter and the receiver. The time to transmit and to decode a group of signals is less than 1ms;
Globally recognised 2.4 GHz waveband – compliant with radio regulations in all major markets.
The RSI-20 receiver out put trigger、error、probe batteries low and output pulse four kinds of signals. And it's logical state can change normally closed and normally open.
The indicating lights in RSI-20 and RPDM show the working status of the probe system
For more information about touch probe and pioneer machine and tool, please feel free to contact us!
Contact : eer Pion, 0451 82285451
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of RPS-L11M Radio Probe System Search in a category : Construction goods Search in a category : l11m, probe, system, radio |
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Thursday, December 19, 2024
- High Speed Front and Back Labeling Machine - Model No.: LD-450S High Speed Front and Back Labeling Machine LD-450S is ideal for simultaneously applying Front and Back pressure sensitive labels to a container. It suits for Round Oval, Square, Rectangular or Irregular products labeling...
Autopack Co.,Ltd
- autopacker
- 33454 - Taoyuan City
- +88 6 33 68 98 06
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935