POWSIL-59223
Quantity : 1000Kgs Price : USD1~2000/Kg
POWSIL-59223 is an innovative textile softener, especially designed to deliver a hydrophilic, voluminous and silky natural hand feel to most types of fabrics at lower use level than traditional silicone softeners.
It provides fast & consistent hydrophilicity and high ability of fabric to rapidly absorb & retain liquid water of water absorption to most types of textile fiber or silicone fabric, especially for terry towel, which cannot be obtained with traditional silicone or fatty acid based softeners. It is very stable in ordinary textile finish process without causing oil-spots on fabric.
Technical Data
|
Property |
Value |
|
Physical Form |
Liquid state |
|
Appearance |
Clear, pale & yellowish |
|
Solid Contents (wt%) |
55.0-58.0 |
|
Viscosity (25°C, cps) |
<1000</p> |
|
pH (25°C) |
4.0-6.0 |
|
Flash Point(°C, Open) |
>100 |
|
Diluents |
Water |
|
Gravity(25°C) |
0.993 |
|
Ionic |
Slightly cationic |
Application
POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water into any grades wihout additional emulsifying process.
Micro-emulsion for 30.0% of POWSIL-59223
Formulation:
|
POWSIL-59223: |
30% |
|
Water: |
70% |
Procedures:
Charge water into a tank and start to stir;
Add POWSIL-59223 gradually under stirring;
Continue to stir for 5-10 min after all addition;
Clear micro-emulsion will be obtained at end of this procedure.
POWSIL-59223 can be used as received or pre-diluted with water before applying.
Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing.
Pad-dry-cure process
|
Dosage: |
10~20g/L for light fabric or 25-50g/L for heavy fabric |
|
pH: |
5.0 ~ 7.0 |
|
Temp.: |
Ambient temperature |
|
Dry/Cure: |
120-170 ºC for1-3min |
Exhaustion process
|
Dosage: |
1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric like terry towel |
|
Liquor ratio: |
1/10-1/20 |
|
pH: |
5.0 -7.0 |
|
Temp.: |
Ambient temperature |
|
Time: |
10-30 min |
|
Spinning & Drying: |
100 ~ 170 ºC for 1-3 min |
Garment washing process
|
Dosage: |
1.0 -3.0% on the weight of garment |
|
Temp.: |
Ambient temperature |
|
Time: |
30 ~ 60 min |
|
Spinning & Drying: |
100-130 ºC for 3-5 min |
Stripping:
POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation is as follows:
|
NaOH: |
5g/L |
|
LABS (30%): |
2-5% |
Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water.
Packing and Storage
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.
As a silicone producer, we will offer high quality products to you.
Contact : Amy Wu, 025 58599930
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of POWSIL-59223 Search in a category : B2B Services Search in a category : powsil |
Tuesday, March 31, 2026
Dual Piston Volumatical Filling Machine FP425. available for working independently on each system. Cylinder Volume can be customized based on customer's requirement. FEATURES: - Filling volume can be customized based on customer's requirement - Each piston system can be set independently...
Autopack Co.,Ltd
- autopacker
- 33454 - Taoyuan City
- +88 6 33 68 98 06
Wednesday, March 23, 2016
Quantity : 200 - Price : FOB Keelung, Taiwan
No Matter you looking for a beauty care or healthcare product, our Bubble Bath Spa Massager have a fully functions to meet your any request. You might be curious that what the function of spa massager it is?! Merits of MSW-104 are as follows; 1. Based on the principle of explosion...
LienJie International Ltd.
- 414 - Taichung City
- +886 4 23367128
Saturday, April 11, 2015
JCS Cosmetics is a professional skin care products manufacturer in Taiwan and provides a series of Honeysuckle Herbal Hydra products to meet customer's needs. This toner is enriched with herbal soothing factors. Using hydration transmission technique to increase skin's water holding...
JC's Cosmetics Co., Ltd.
- jcsherbal
- 701 - Tainan
- +88 6 62 60 45 98





