B2B Services
POWSIL-59223 |
Property |
Value |
Physical Form |
Liquid state |
Appearance |
Clear, pale & yellowish |
Solid Contents (wt%) |
55.0-58.0 |
Viscosity (25°C, cps) |
<1000</p> |
pH (25°C) |
4.0-6.0 |
Flash Point(°C, Open) |
>100 |
Diluents |
Water |
Gravity(25°C) |
0.993 |
Ionic |
Slightly cationic |
Application
POWSIL-59223 Hydrophilic Silicone Softener can be readily diluted with water into any grades wihout additional emulsifying process.
Micro-emulsion for 30.0% of POWSIL-59223
Formulation:
POWSIL-59223: |
30% |
Water: |
70% |
Procedures:
Charge water into a tank and start to stir;
Add POWSIL-59223 gradually under stirring;
Continue to stir for 5-10 min after all addition;
Clear micro-emulsion will be obtained at end of this procedure.
POWSIL-59223 can be used as received or pre-diluted with water before applying.
Optimum treatments are dependent on the required softness of the fabric and yarn after dyeing and finishing.
Pad-dry-cure process
Dosage: |
10~20g/L for light fabric or 25-50g/L for heavy fabric |
pH: |
5.0 ~ 7.0 |
Temp.: |
Ambient temperature |
Dry/Cure: |
120-170 ºC for1-3min |
Exhaustion process
Dosage: |
1.0-2.0% (o.w.f.) on light fabric & 2.5-5.0% on heavy fabric like terry towel |
Liquor ratio: |
1/10-1/20 |
pH: |
5.0 -7.0 |
Temp.: |
Ambient temperature |
Time: |
10-30 min |
Spinning & Drying: |
100 ~ 170 ºC for 1-3 min |
Garment washing process
Dosage: |
1.0 -3.0% on the weight of garment |
Temp.: |
Ambient temperature |
Time: |
30 ~ 60 min |
Spinning & Drying: |
100-130 ºC for 3-5 min |
Stripping:
POWSIL-59223 by SiSiB can be stripped off fabric. The stripping formulation is as follows:
NaOH: |
5g/L |
LABS (30%): |
2-5% |
Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and water.
Packing and Storage
To ensure that the product quality is maintained, the container should be tightly sealed when not in use. It should be stored at normal room temperature, preventing prolonged exposure to extreme heat and cold conditions, which may cause product separation. POWSIL-59223 tends to be sediment on bottom during storage period. If the product is separated, stir the contents to homogeneous. If the product is frozen, thaw it at warm condition and stir after thawed.
As a silicone producer, we will offer high quality products to you.
Good deal: buying from seller
This page is about importers and exporters of POWSIL-59223 Search in a category : B2B Services Search in a category : powsil |
Tuesday, February 16, 2016
Quantity : 1000 - Price : 1500 USD/ MT CIF
We are a professional manufacture and exporter of dried apricot, raisin and goji berry, we can supply you dried apricot, brown raisin, golden raisin, green raisin and goji berry with high quality and competitive prices. We can do small pack and bulk pack as buyers' requirements,...
Thursday, May 16, 2024
Quantity : 4000 - Price : 3.6 eur
The true original Tunisian fouta has crossed the ages combining tradition and modernity, functionality and comfort, aesthetics and softness, to today translate as the expression of oriental well-being. Whether woven flat, honeycomb, chevron, Jrida, chevron, or jacquard, its 100% cotton...
Tuesday, June 16, 2015
Quantity : 10000m2/we - Price : USD 80-90/m2
Woven Middle Speed Corrugator Belt Woven High Speed Corrugator Belt was developed to high speed running and rapid dying of the corrugat ed board.the structure and the quality of the belt facilitates steam evaporation from the paperboard .The surface of the belt is twill weave to...