Everything else / Bulk

Machine Vision Lens & Illuminator Manufacturer

Price : 100USD

Since 2009, Canrill has provided more than 1700 kinds of high-performance telecentric lens and illuminator for machine vision system. With the characteristics of extensive models, immediate delivery, cost-effective solutions and free customization service, Canrill can always be your first choice to select the most suitable machine vision lens and illuminators.

Canrill Machine Vision Lens & Illuminator List

Wide range of high performance telecentric lens supporting sensor size from 4.8mm to 82mm, characterized by high resolution, little-to-no-distortion, and good imaging consistency.

16k Line Scan (82mm) Telecentric Lens

12k Line Scan (62mm) Telecentric Lens

8k Line Scan (57.4mm) Telecentric Lens

Full Frame Telecentric Lens

38mm Sensor Telecentric Lens

35mm Sensor Telecentric Lens

2' (32mm) Sensor Telecentric Lens

7-4' (28mm) Sensor Telecentric Lens

4-3' (23mm) Sensor Telecentric Lens

1.1' (18mm) Sensor Telecentric Lens

1' (16.2mm) Sensor Telecentric Lens

Low Mag 2-3' Sensor Telecentric Lens

High Mag 2-3' Sensor Telecentric Lens WD 65mm

High Mag 2-3' Sensor Telecentric Lens WD 110mm

Low Mag 1/2' Sensor Telecentric Lens

High Mag 1-2' Sensor Telecentric Lens WD 65mm

High Mag 1-2' Sensor Telecentric Lens WD 110mm

High Mag 1-2' Sensor Telecentric Lens Long Working Distance

Telecentric Illuminator

9 types of telecentric illuminator covering the beam diameter from 20mm to 238mm, offering higher edge contrast, and is recommended for high accuracy measurement.

View More

Non-Telecentric Lens

Non-telecentric lens MH series is the latest series Canrill has developed in 2020, suitable for measurement and high-end positioning applications which do not require telecentricity. A supplement and replacement of FA lens and low resolution telecentric lens.

View More

Microscopy Lens

Canrill miscroscopy lens VM series adopt modular design, different combinations can realize different functions. Major module consists of main body, illumination, horizontal imaging module, mount and other special parts.

View More

DMD Lithography Lens

Canrill dual-waveband and tri-waveband LDI lens optimize the image quality completely and the transmittance, which is better than 80% during waveband from 360nm to 400nm while ensuring the image quality in the same time

View More

Telecentric Lens Accessory

Canrill offers different types of prism, controller and point illumination to support the use of our high performance lens. Whether you need to bend light for applications with space constraints, or point illumination matched with coaxial lens, Canrill has options to help you optimize your solution as much as possible.

View More

Why Canrill Machine Vision Optics Products Are Worth Your Trust

11 Years' R&D Experience

20+ Senior Researchers

1um Accuracy

1700+ Models

Lifetime Warranty

11 Years' R&D Experience

11 Years' R&D experience on telecentric solutions for various applications since 2009, professional and experienced to offer existing or customized vision products for different industries.

20+ Senior Researchers

More than 20 senior researchers in both optical and mechanical field ensures the upgrading of new series and unmatched technical service.

1um Accuracy

High resolution with the measurement accuracy as high as 1um

1700+ Models

More than 1700 models of telecentric lens and other machine vision products in existing product line, and this number keeps increasing per day.

Lifetime Warranty

Canrill Optics guarantees lifetime warranty for all machine vision products, replace new one for non-human factors within 2 years, and lifetime maintenance

Custom Machine Vision Lens & Illuminator From Canrill

Canrill catalog or product list on website only presents our most common models. Canrill also has an extensive of non-standard models in production. In addition, Canrill Optics offer customized machine vision lens or illuminators upon detailed request from customers. With rich experience both in optical design and mechanical engineering, and also our own optical factory and mechanical factory, Canrill is able to react fastest from design to prototype to mass production.

Canrill's record is 12 days to produce a complete new lens including design time.

Custom Machine Vision Lens & Illuminator From Canrill

Machine Vision Lens Fundamentals to Consider

There Are Three Basic Principles Of Lens Selection:

Lens Object FOV is a little larger than customer required FOV.

Lens Image FOV is equal or larger than camera sensor size.

Mag below 1X refers to low mag, above 1X refers to high mag.

There Are 3 Important Factors That Contribute In The Selection Process:

Image FOV, the sensor size of camera

Object FOV, the size of observed object

Working Distance

By image FOV and object FOV, the magnification of the lens can be acquired, that is image FOV/Object FOV.

Knowing the above, we can select a suitable lens from the existing product list.

Example:

Camera: 1/2.5'-5MP

Sensor size: 5.7*4.3mm

FOV: 60*40mm

To pick a suitable lens, first to calculate the mag, 5.7/60=0.095X, 4.3/40=0.1075X.

Lower mag will be picked so as to cover full FOV.

From Canrill product line, Canrill fouth generation PTL series PTL-08 series is the most suiable, and the mag of XF-PTL09228 is 0.0847, is the closest figure to 0.095X.

Thus XF-PTL09228 is selected.

Canrill Optics is one of professional machine vision systems manufacturers. We provide Telecentric Lens, Telecentric Illuminator, Non-Telecentric Lens, magnification lens and so on. Want to know more? Please contact us.

Location : Room 405, Building A, Xinlong Industrial Park, No 50. Fengtang Ave, Bao'an, Shenzhen, Guangdong, China, 518103, 518103 Shenzhen,
Contact : Mei Mariel, 86 755 36983709

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Machine Vision Lens & Illuminator Manufacturer

Search in a category : Everything else / Bulk
Search in a category :
illuminator, lens, manufacturer, vision, machine
Tunisia 5099 Feasts items
Fouta Clark 100%

Sunday, March 24, 2024

Quantity : 50000 - Price : dépend du quantité

High quality, pleasant to the touch, light, soft, Ultra-absorbante and dry fast: your Fouta will follow you around, in your bathroom, at the pool, at the beach, on the transat, the boat or pareo, surrounding the babies, the children out of the bath. In your carry-on baggage or...

artisanat Tunisien

  • med.SGHAIER
  • 5099 - Tunisia,Monastire
  • +21 6 26 10 49 12
  • 26104912
France 450000 Raw materials
Polvo de meta Presión de la pelota

Sunday, August 10, 2014

Quantity : 25 - Price : USD 3500-88888

Краткие сведения Место происхождения: Китай (материк) Фирменное наименование: ен хуа Номер Модели: yhq Условие: Ново использование: ролик мяч пресс машины гарантия: один год гарантии цвет: как запрос клиента сертификации: исо, се, б. в. преимущества: высокая плотность...

Henan Zhengzhou Yonghua Machinery

  • olina1
  • 450000 - zhengzhou CITY
  • +13 6 07 69 93 63
Thailand 15140 Food
BBQ Hardwood Charcoal, Pillow Shapped Charcoal, Hexagone

Sunday, July 26, 2015

We love what we do. No matter what item we are dealing in, we try our best to provide our customers with the best quality products and services. We feel very proud with our customers' responses. We like nothing more than to hear from our customer and invite them to reach us any time...

TRADEX GROUP CO LTD

  • 15140 - opburi
  • +6661409539