Equipment goods

LBO

Quantity : 999

Lithium Triborate (LiB3O5 or LBO) is an attractive nonlinear optical (NLO) crystal which widely used for harmonic generation of high-intensity laser radiation.
Crysmit offers
• Maximum processing size 30x30x30 mm3
• Maximum processing Length 60mm
• A large quantity of crystal in stock, Competitive Price
• Non-critical phase Matching (Theta=90°,Phi=0°)
• Fast delivery(10 days for polish only, 15 days for AR-coated)

Email now: sales@crysmit.com

Main Features:
• Broad transparency range from 160nm in UV to 2600nm in IR;
• Relatively large effective SHG coefficient (about three times that of KDP);
• High effective non-linear coefficient ,wide acceptance angle and small walk-off;
• High damage threshold (>10GW/cm2 for 1064nm, 20ns, 50Hz);
• Type I and type II non-critical phase matching (NCPM) in a wide wavelength range;
• High optical homogeneity (dn~10-6/cm) and being free of inclusion;
• Spectral NCPM near 1300nm;
• Absorption: <30ppm/cm @1064nm <50ppm/cm for high power laser application.</div>
Typical Applications :
• SHG and THG for middle and high power Nd: lasers at 1064nm for medical, industrial and military applications;
• SHG for Ti: Sapphire, Alexandrite and Cr: LiSAF lasers;
• The VUV output at 187.7 nm is obtained by sum-frequency generation;
• SHG and THG of high power Nd: lasers at 1342nm & 1319nm for red and blue laser;
• SHG for the Nd: Lasers at 914nm & 946nm for blue laser;
• NCPM SHG over a broad wavelength range from 900nm-1700nm was measured;
• Phase matching process: SHG-554 nm fundamental, THG-794 nm, SFM-down to 160 nm;
• Optical Parametric Amplifiers (OPA) and Oscillators (OPO) application.
Physical and Chemical Properties:
Crystal Structure
Orthorhombic, Space group Pna21, Point group mm2
Lattice Parameters
a=8.4473Å, b=7.3788Å, c=5.1395Å, Z=2
Melting Point
About 834 °C
Mohs Hardness
6
Density
2.47 g/cm3
Hygroscopic Susceptibility
Low
Thermal Conductivity
3.5 W/m/K
Thermal Expansion Coefficients
αx=10.8x10-5/K, αy= -8.8x10-5/K, αz=3.4x10-5/K
Optical and Nonlinear Optical Properties:
Transparency Range
160 - 2600 nm
Phase Matching Range
551-2600nm for Type I, 790-2150nm for Type II
Thermo-Optic Coefficients (℃-1, λ in μm)
dnx/dT = - 9.3 x 10-6
dny/dT = -13.6 x 10-6
dnz/dT = (-6.3+2.1λ) x 10-6
Sellmeier Equations (λ in μm)
n2x= 2.4542+0.01125/(λ2-0.01135)-0.01388λ2
n2y=2.5390+0.01277/(λ2-0.01189)-0.01848λ2
n2z=2.5865+0.01310/(λ2-0.01223)-0.01861λ2
Non-Vanished Nonlinear Susceptibilities
d31 = 1.05 ± 0.09 pm/V
d32 = -0.98 ± 0.09 pm/V
d33= 0.05 ± 0.006 pm/V
Specifications:
Apertures
up to 30 x 30mm2
Length
up to 50mm
Dimension Tolerance
(W ± 0.1mm) x (H ± 0.1mm) x (L + 0.2mm/-0.1mm)
Phase Matching Angle Tolerance
∆θ< ± 0.25°; ∆φ< ±0.25°
Flatness
λ/10 @ 633nm
Wavefront Distortion
λ/10 @ 633nm
Surface Quality
10/5 Scratch/Dig
Parallelism
10 arc seconds
Perpendicularity
3 arc minutes
Clear Aperture
≥95% central area
Edge Bevel
0.15mm x 45°±5°
AR Coatings
R < 0.2% @ 1064nm, R < 0.5% @ 532nm
Damage Threshold of AR Coating
1 GW/cm2for 1064nm, 10ns pulse, 10Hz

Location : 118 Yangqiao Road West,Fuzhou,350002,P.R.China, china fujian ,
Contact : amiee ye,

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
LBO

Search in a category : Equipment goods
Search in a category :
Pakistan 51310 Search / buy
Toenail Nipper / Professional Nail Cutters

Friday, January 24, 2020

Made With High Quality Stainless Steel . Also Available In Plasma Coating, Powder Coating, Full Gold, Half Gold & Half Black, Dull and Mirror Polish Finish For more detail Please Visit our web Site www.craftmed.com Location : Sialkot Pakistan, Small Industrial estate, 51310 Sialkot, Contact ...

France 467000 Raw materials
GRAPHITE JEWELRY MOLD

Saturday, July 09, 2022

Quantity : 30000TONS - Price : 1-20USD/KG

GRAPHITE JEWELRY MOLD Graphite molds for jewelry make original designs of graphite crucibles attached to them for a long time, which keeps high-temperature resistance. Making graphite molds for jewelry is the procedure used to insure that jewelry items can be accurately duplicated...

Pingdingshan Wanhui Graphite Co., LTD

  • 467000 - Pingdingshan
  • 0375 6506966
  • 86 15539792960
Egypt 045 Food
Aromatic and Medical Herbs and seeds

Wednesday, August 16, 2017

We would like to introduce our selves, we are Export Development Authority (EDA), under the ministry of Trade and Industry. We Can help investors, businessmen, small and medium enterprises, exporters and importers, so we have investment, import and export opportunities. Our clients...

Behira International Trade Point (BITP)

  • 045 - Damanhour
  • +20 4 53 33 18 99