LBO
Details
China Equipment goods
Equipment goods

LBO

Quantity : 999

Lithium Triborate (LiB3O5 or LBO) is an attractive nonlinear optical (NLO) crystal which widely used for harmonic generation of high-intensity laser radiation.
Crysmit offers
• Maximum processing size 30x30x30 mm3
• Maximum processing Length 60mm
• A large quantity of crystal in stock, Competitive Price
• Non-critical phase Matching (Theta=90°，Phi=0°)
• Fast delivery(10 days for polish only, 15 days for AR-coated)

Email now: sales@crysmit.com
Main Features:
• Broad transparency range from 160nm in UV to 2600nm in IR;
• Relatively large effective SHG coefficient (about three times that of KDP);
• High effective non-linear coefficient ,wide acceptance angle and small walk-off;
• High damage threshold (>10GW/cm2 for 1064nm, 20ns, 50Hz);
• Type I and type II non-critical phase matching (NCPM) in a wide wavelength range;
• High optical homogeneity (dn~10-6/cm) and being free of inclusion;
• Spectral NCPM near 1300nm;
• Absorption: <30ppm/cm @1064nm <50ppm/cm for high power laser application.</div>
Typical Applications :
• SHG and THG for middle and high power Nd: lasers at 1064nm for medical, industrial and military applications;
• SHG for Ti: Sapphire, Alexandrite and Cr: LiSAF lasers;
• The VUV output at 187.7 nm is obtained by sum-frequency generation;
• SHG and THG of high power Nd: lasers at 1342nm & 1319nm for red and blue laser;
• SHG for the Nd: Lasers at 914nm & 946nm for blue laser;
• NCPM SHG over a broad wavelength range from 900nm-1700nm was measured;
• Phase matching process: SHG-554 nm fundamental, THG-794 nm, SFM-down to 160 nm;
• Optical Parametric Amplifiers (OPA) and Oscillators (OPO) application.
Physical and Chemical Properties:
Crystal Structure
Orthorhombic, Space group Pna21, Point group mm2
Lattice Parameters
a=8.4473Å, b=7.3788Å, c=5.1395Å, Z=2
Melting Point
About 834 °C
Mohs Hardness
6
Density
2.47 g/cm3
Hygroscopic Susceptibility
Low
Thermal Conductivity
3.5 W/m/K
Thermal Expansion Coefficients
αx=10.8x10-5/K, αy= -8.8x10-5/K, αz=3.4x10-5/K
Optical and Nonlinear Optical Properties:
Transparency Range
160 - 2600 nm
Phase Matching Range
551-2600nm for Type I, 790-2150nm for Type II
Thermo-Optic Coefficients (℃-1, λ in μm)
dnx/dT = - 9.3 x 10-6
dny/dT = -13.6 x 10-6
dnz/dT = (-6.3+2.1λ) x 10-6
Sellmeier Equations (λ in μm)
n2x= 2.4542+0.01125/(λ2-0.01135)-0.01388λ2
n2y=2.5390+0.01277/(λ2-0.01189)-0.01848λ2
n2z=2.5865+0.01310/(λ2-0.01223)-0.01861λ2
Non-Vanished Nonlinear Susceptibilities
d31 = 1.05 ± 0.09 pm/V
d32 = -0.98 ± 0.09 pm/V
d33= 0.05 ± 0.006 pm/V
Specifications:
Apertures
up to 30 x 30mm2
Length
up to 50mm
Dimension Tolerance
(W ± 0.1mm) x (H ± 0.1mm) x (L + 0.2mm/-0.1mm)
Phase Matching Angle Tolerance
∆θ< ± 0.25°; ∆φ< ±0.25°
Flatness
λ/10 @ 633nm
Wavefront Distortion
λ/10 @ 633nm
Surface Quality
10/5 Scratch/Dig
Parallelism
10 arc seconds
Perpendicularity
3 arc minutes
Clear Aperture
≥95% central area
Edge Bevel
0.15mm x 45°±5°
AR Coatings
R < 0.2% @ 1064nm, R < 0.5% @ 532nm
Damage Threshold of AR Coating
1 GW/cm2for 1064nm, 10ns pulse, 10Hz

Location : 118 Yangqiao Road West,Fuzhou,350002,P.R.China, china fujian ,
Contact : amiee ye,

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
LBO

Search in a category : Equipment goods
Search in a category :
Indonesia 55225 Electronics / Computers
Kyocera Inkjet Printhead KJ4B-0300 series 300dpi

Friday, November 12, 2021

Quantity : 500 - Price : $1,910.00

Original for kyocera Print head for textile printer water based KJ4B-0300 Original KJ4B-0300 Series Printhead Solvent Print Head for Kyocera Print Head Printing Machine. This new generation Kyocera KJ4B-0300 is designed for high speed single-pass applications with printers using aqueous ink...

dwikisworo.com

  • 55225 - Yogyakarta
  • 6285762678702
France 467000 Raw materials
GRAPHITE JEWELRY MOLD

Thursday, July 27, 2023

Graphite jewelry molds make original designs of graphite crucibles attached to them for a long time, which keeps high-temperature resistance. Making graphite molds for jewelry is the procedure used to insure that jewelry items can be accurately duplicated at any time future. The mold...

Pingdingshan Wanhui Graphite Co., LTD

  • 467000 - Pingdingshan
  • 0375 6506966
  • 86 15539792960
France 201615 Raw materials
TTA500: N,N-Diglycidyl-4-Glycidyloxyaniline Cas 5026-74-4

Wednesday, November 08, 2023

Quantity : 9000tons - Price : $12~15/kg

As a typical special glycidyl amine epoxy resin, TTA500 cas 5026-74-4 has the characteristics of low viscosity, low shrinkage, and high-temperature resistance. Its molecular structure contains three epoxy groups and a heat-resistant benzene ring, thus, the cured product has high crosslinking...

Jiangsu Tetra New Material Technology Co., Ltd.

  • 201615 - Songjiang
  • 0086 2154265697