Cosmetics and beauty

HIFU FU4.5-2S High Intensity Focused Ultrasound Machine

Quantity : ask   Price : ask

HIFU FU4.5-2S High Intensity Focused Ultrasound Machine

With 4MHZ/7Mhz/8MHz/10MHz

Amazing result will last 2-3 years!

alt

Working theory of the HIFU

High Intensity Focused Ultrasound (HIFU) directly delivers heat energy to skin and subcutaneous tissue that can stimulate and renew the skin's collagen and thus consequently improving the texture and reducing sagging of the skin. It literally achieves the results of a facelift or a body lifts without any invasive surgery or injections, moreover, an added bonus of this procedure is that there is no downtime. This technique can be applied to the face as well as the whole body, and also, it works equally well for people of all skin colours, in contrast to that of lasers and the intense pulse lights.

alt

Features of the HIFU

-Quick & short treatment time: 30 MINS one face treatment

-SMAS contraction: collagen remodeling , elastine fiber contraction

-None downtime: skin just become red within the first several hours , then skin recover

-Instant result will be checked from the second month to the nine month, good result will last 2-3 years

-Totally non-invasive

Advantages of HIFU

- Instead of the traditional surgical face lift with a non-invasive technique.

- Tighten sagging skin,improve sagging and other signs of aging.
- With a special transmitter,transmission from the skin surface conduction of high-energy focused ultrasound to the SMAS layer.
- In the skin layer to produce the specified target multiple temperatures above 65-70 degrees in short time or above sonic focus high energy,forming”heat cure” area,the focus cells are solidified,then ablation,fascia speedy improvement,to achieve wrinkle effect.
- Non-invasive,no time to rest after surgery,ultrasound without injections,no surgery,no trace wrinkle skin rejuvenation.
- Fit any age,both men and women.
- Equipped with a variety of different levels of energy emission transmitter skin,the high-energy focused ultrasound transmitted to the skin layers.
- Proprietary high-speed transmission technology of 0.1-0.25
- Up to 15000 lines of a layered high-precision emitter transmitter is three times that of similar instruments,greatly improving the cost effectiveness.
- Exclusive development of stable output 4-10MHZ broadband technology that fits well with layered skin treatment technology.

alt

Specification of HIFU

Input Voltage

AC 100V-230V 50Hz-60Hz

Power

<160VA</span>

Output Power

0.2 to 2.0J (0.1J/STEP)

Spacing

1.0 to 10mm (0.5mm/STEP)

Focal Length

5.0 to 25 mm (1.0mm/STEP)

Transducer

DS-4.5D, DS-3.0, DS-1.5

altalt

Layered energy emission transmitter of HIFU

1. DS-4.5D 4MHZ frequency used to transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming “heat coagulation” regional, targeted to thicker skin, such as cheeks, etc.

2. DS-4.5S 7MHZ frequencies used to transmit high-energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, targeted to thinner skin, such as the forehead, thin and neck.
3. DS-3.0 for transmitting high frequency of 8 MHZ focused ultrasound energy into the dermis layer of the skin tissue,the ultrasound to penetrate the skin to a depth of 3.0mm,is responsible for activating the skin's l layer of collagen,effectively enhance the effect of the consolidation of the outline,but also improve large pores and reduce the appearance of wrinkles.

4. DS-1.5 10MHZ frequency used to transmit high-energy focused ultrasound to the epidermis tissue,the ultrasound to penetrate the skin to a depth of 1.5mm,is responsible for activating the skin epidermis in thinner tissue.

HIFU Skin tighten process

1. Skin cleaning

2. Take photo and mart the treat skin area

3. Pt gel as a conductor between the transmitter and the skin

4. Mark the treating area,such as around the chin,neck,both sides of the plane

5.Pay attention to avoid the edge of the chin nerve(marginal mandibular nerve) and suprao rbital never(supra orbital never) area

6. After completion,and no recovery period,can use skincare products and make-up

7. Just once,the full effect will gradually aprear in 2-3 months time

alt

Packaging & Shipping

alt

Location : 303Floor, No.15 Building, No.113, the south of Huadi Avenue, Liwan District Guangzhou, 510385 liwan district,
Contact : Yomi Tan, 8602081494207

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
HIFU FU4.5-2S High Intensity Focused Ultrasound Machine

Search in a category : Cosmetics and beauty
Search in a category :
ultrasound, machine, focused, hifu, high, intensity
Indonesia 60261 Electronics / Computers
Mimaki JV33 JV5 Print Head with Memory Board M007947

Wednesday, July 01, 2020

Quantity : 1 - Price : 685,00 €

Mimaki JV33 JV5 Print Head with Memory Board - M007947 Original Mimaki JV33 / JV5 Printhead with Memory Board- M007947 This complete original Mimaki JV33/JV5 printhead is suitable for the Mimaki solvent printer series. The Mimaki JV33/JV5 printhead has a native resolution of 1440dpi...

salesignsupply

  • 60261 - Kota SBY
  • 62 0315921236
Hong Kong 200000 Environment / Ecology
Emballage électronique d'insert de pulpe moulé pour téléphone portable

Tuesday, August 09, 2022

Molded pulp protective packaging is an environmentally friendly alternative to plastic and Styrofoam (EPS) . It's becoming increasingly popular in electronics packaging, widely used for smartphones, headphones, earphones, and other digital products. Products Description Item Name...

  • 200000 - Shanghai
  • +84(274)3899355
France 518106 B2B Services
Custom Metal Prototyping CNC Turning Parts

Friday, January 05, 2024

Aluminum alloy is a metal material with beautiful appearance and excellent performance, such as light weight, high strength, good corrosion resistance, weather resistance and easy cutting performance, making it one of the widely used materials in various industries. The biggest...

YS RAPID MANUFACTURING LIMITED

  • ysrapid
  • 518106 - shenzhen
  • 8615817251032