Harmonic Gearbox

Laifual adopts our newest developed "LS" tooth profile, which improves harmonic reducer's comprehensive performance a lot. Compared to the original "δ" tooth profile, the load capacity of our harmonic drive reducers/gearboxes increases 15%; temperature rise decreases 8-10 ℃; gear's fatigue pitting contact area decreases more than 30%; a lifetime is more than 15000 hours.

Harmonic Gearbox Catalog

Types of Harmonic Drive Gearbox

LSS/LSG/LSN Standard Type/High Torque/Light Weight Harmonic Gearbox

LSD Shorten Thin Harmonic Gearbox

LFS Ultra Flat Harmonic Gearbox

LHT/LHN/LHG Large Diameter Hollow Hole, Flat Shape Harmonic Gearbox

LHD Shorten Thin Harmonic Gearbox

Composition of Harmonic Gear Reducer

Harmonic gear reducer has three basic components：a wave generator,a flexspline and a circular spline.

01Wave Generator

It is made up of a ball bearing and an elliptical cam. The wave generator is usually attached to the input end, the inner ring of the bearing is fixed around the cam causing the outer ring of the bearing deforms to an elliptical shape.

02Flex Spline

It is an elastic thin-walled component with gear teeth on the outer surface. It is usually fitted to the output end.

03Circular Spline

It is a rigid steel ring with internal teeth. It usually has two more teeth than the flex spline, and generally mounted onto a housing.

Harmonic Drive Working Principle

As a reducer, the harmonic gear reducer is often in status as the wave generator drives, the circular spline is fixed, and the flex spline is output end.

When the wave generator is put inside of the flex spline, the flex spline is forced into an elliptical shape causing the flex spline teeth to engage with the tooth profile of the circular spline along the major axis of the ellipse, with the teeth completely disengaged across the minor axis of the ellipse.

The rotation of the wave generator makes the flex spline deform continuously, the teeth change operating state in the process of engagement and disengagement, thus the motion transmission between wave generator and flex spline is realized.

Characteristics of Harmonic Gear Reducer

High accuracy

A good percentage of its teeth are meshed at all times and are engaged at two zones 180 degrees apart. This means influences of tooth pitch errors and accumulated pitch errors on rotational accuracy are neutralized, which assures high positional and rotational accuracy.

High speed reduction ratio

A harmonic gear reducer has high single-stage reduction ratios of 1/30-1/500. Three basic components along same axle without complex structures can provide high reduction ratios.

High torque capacity

Each tooth subjected to a negligible amount of force yet provides a high torque capacity because of the way the teeth come into contact with each other and because a good percentage of the teeth in the flex spline is engaged at all times.

Small-sized and light weight

While being less the size of conventional gearing mechanisms and less the weight, the harmonic gear reducer provides the same levels of torque and speed reduction ratios as its conventional counterparts enabling machinery and equipment to be made smaller and lighter.

Superior efficiency and long life time

As a professional harmonic drive company in China, Laifual produces harmonic drive reducers with superior efficiency and long service time.

Quiet and minimal vibration operation

Laifual's harmonic drive reducers also operate with quiet and minimal vibration.

Zhejiang Laifual Drive Co., Ltd. is one of professional harmonic drive manufacturers and reduction gearbox suppliers. We provide LSD Shorten Thin Harmonic Gearbox, LFS Ultra Flat Harmonic Gearbox, harmonic reduction gear, harmonic speed reducer, Nema 23 harmonic drive, harmonic gearbox design and so on. Want to know about harmonic drive transmission and harmonic drive principle? Please contact us.