Gr5 Titanium Tube
The 21st century is an era of sustainable development of the marine economy, and marine resources are an important sector of economic development. Gr5 titanium tube has become the preferred material for deep-sea equipment manufacturing due to its excellent corrosion resistance, low density, and high specific strength. It is widely used in the production of oil wells, geothermal and natural gas well pipelines, as well as precision instruments and meters. If you want to know more about the gr5 titanium tube price and cost, please do not hesitate to contact the CS titanium tube supplier.
Gr5 Titanium Tube Size
Outside diameter |
>20mm |
Wall thickness |
>3mm |
Length |
<6000mm</span> |
Some Sizes of Gr5 Titanium Tube Applications for Your Reference:
OD.52*6.5*L/ OD.40*3.5*L/OD.40*12*L used for aeroplane.
OD.34.9*0.9*L/44.5*1.37*L used for titanium bike frame manufacturing.
OD.98~OD.168mm used in petroleum industry.
Gr5 Titanium Tube Production Process
The GR5 titanium on the market are mainly high-strength thick walled produced by hot extrusion and rolling methods. If the length is short, it can be formed by direct forging and turning. Another process is to directly drill deep holes on the forged rod and use an external lathe to achieve the size required by the customer. This process can achieve a titanium tube length of 3 meters.
Introduction to Gr5 Titanium Tube Extrusion Process
Grade 5 ingot produced by two vacuum consumable electric furnaces→forged rod billets→extruded tube billets → online straightening and acid pickling surface descaling → internal and external surface processing →finished GR5 titanium alloy tubes.
Gr5 Titanium alloy has poor thermal conductivity, resulting in a significant temperature difference between the surface layer and the central layer of the billet, which exacerbates the non-uniformity of metal flow. As a result, the surface layer generates significant additional tensile stress and forms cracks on the product surface. In severe cases, large extrusion shrinkage holes may occur on extruded bars and . Titanium alloy have significant thermal effects during the extrusion process, which can cause overheating of the structure of the extruded in severe cases, thereby affecting the structure and performance of the product. Therefore, the reasonable selection of extrusion parameters and processes is very important, such as production of the Ф140 * 4 * 4000mm titanium alloy tube is extruded with a compression ratio of 3-10, and an extrusion speed of 50-120mm/s is selected to avoid thermal effects.
Gr5 Titanium Tube Applications
With the acceleration of oil and natural gas drilling and production, the demand for large-diameter extruded titanium alloy gr5 has also increased. These are mainly used for oil wells, geothermal and natural gas well pipelines, etc. The United States will Ф (48~610) * 26 * 2600mm GR5 titanium alloy pipe is used for geothermal and offshore drilling pipelines. Produced by RMI Corporation in the United States Ф 650 * (22-25) * 35000mm ultra long gr9 (Ti-3Al-2.5V) titanium alloy pipe is used for subsea oil extraction. The riser of the Norwegian North Sea drilling support platform is Ф600 * 25 * 1500mm gr5Eli (gr23) titanium alloy pipe. Russian VS MPO company produces gr5 titanium alloy for oil extraction.
Contact : .com cstitanium, 09173376915
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Gr5 Titanium Tube Search in a category : Raw materials Search in a category : titanium, tube |
Saturday, November 09, 2024
Quantity : 100,000 pc
JBI is one of the leading professional hardware parts manufacturers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification....
Jeng Bright International Corporation
- jbitwco
- 830 - Kaohsiung City
- +88 6 77 02 10 77
Friday, December 15, 2017
OEM PART NO DESCRİPİTİON 66072 Crown Wheel and Pinion FOR CARRARO 13X30 66941 Crown Wheel and Pinion 15x37 2277448 CATERPİLLAR AİR FİLTER OUTER 2277449 CATERPİLLAR AİR FİLTER İNNER 01/117901 FAN BELT 01/124403 FAN BELT 01/124404 02/100073 Oil Filter Canister Type, MEDİUM MODEL 02/100284...
ANAC MAKINA CO LTD STI
- 34800 - İSTANBUL
- +905069691531
- +9005069691531
Saturday, November 09, 2024
Quantity : 100,000 pc
JBI is one of the leading professional fastener manufacturers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification. Our fasteners...
Jeng Bright International Corporation
- jbitwco
- 830 - Kaohsiung City
- +88 6 77 02 10 77