Member's display HYSILICON0013 Shenzhen Hong Ye Jie Technology Co. Ltd.

Features: Good characteristics of easy-operation, high duplication times, good flowability and light viscosity,low shrinkage, no deformation,favorable tension,favorable hardness,high temperature resistance, acid and alkali-resistance and aging resistance, long shelf life over 12 months,high strength, Applications: mold making silicone rubber is primarily intended for mold making of gypsum, concrete, poly resin ,PU resin, unsaturated resin crafts, lighting and candles crafts , plastic toys , stationery gifts crafts industry, large statue, Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, European buildings, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Description: mold making silicone rubber, which is a kind of flowable liquid silicone and an environmentally-friendly liquid silicone, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration. Meanwhile, there are other names for mold making silicone rubber that are tin-based silicone or condensation-cure silicone, that contains two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicone can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicone can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature metals. Our tin-cured silicone systems are the most economical. They are best used for casting resins and low melt metals. Instructions: During operate the three important thing to pay attention 1. weigh the liquid silicone rubber and curing agent exactly 2. Stir the liquid silicone rubber and curing agent evenly 3.we should choose the right hardness to making different size of product mold