Digital Display Pressure Transmitter
NCS Series of Intelligent Transmitters are digital, intelligent, network-based, merged with advanced, reliable and stable sensor technology, to be designed as a new generation of Fieldbus Intelligent Transmitter.
NCS Series of Intelligent Transmitter have been designed with high precision and high reliability, high stability. The pressure, temperature, currents and other physical quantities are displayed on LCD module. Zero drift, range settings and many other functions, are realized by the magnetism bar operation. The interoperability between different systems and equipments are realized by the Equipment Description Document, which is coMpatible to a variety of device management software, and adapting to harsh electromagnetic environment. NCS Series of Intelligent Transmitter have been used in inflammable and explosive places according to Intrinsically Safety Design.
Basic parameters
|
Measure Object |
Liquid, Gas, Stream |
|
|
Power |
9~32V DC(FF,PA) 9~32v DC (FF, PA Explosion-Proof Instrument) 11.9~42 V DC (HART) 11.9~30 V DC (Hart Explosion-Proof Instrument) |
|
|
Output |
Analog: 2 Wire 4~20ma Digital: HART, FF AND PA Signal |
|
|
Load Resistant |
0~1500ohm (Common) 250~550ohm (With Hart) |
|
|
Insulation |
Input And Output Insulating Voltage: 500vrms (707vdc) |
|
|
Display |
Optional 6 Bits Digital Number Or 5 Bits Characters LCD Display |
|
|
Temperature Scale |
Work Temperature: -40 ~ 85℃ (No Display) -30 ~ 70℃ (Display) -30 ~ 60℃ (Explosion-Proof) Store Temperature: -40 ~ 100℃ (No Display) -40 ~ 85℃ (Display) |
|
|
Allowed Media Temperature Measured |
-40 ℃~ 110 ℃ (Type Name Include ‘IC‘) -40 ℃~ 149 ℃ (Silicone Oil) -40 ℃~ 204 ℃ (Sylthlem800) -18 ℃~ 204 ℃ (Inert Liquid) -40 ℃~ 104 ℃ (Others) |
|
|
Humidity Scale |
5%~100%Rh |
|
|
Start Time |
≤ 5 Seconds |
|
|
Refresh Time |
0.2 Seconds |
|
|
Dump Adjusting |
Time Constant 0~15 Seconds |
|
|
Change Of Cavity |
< 0.16 Cm3 |
|
|
Static Pressure Limit |
SR |
Range 2: 1000psi (6.89Mpa) |
|
SD |
Range 3~8: 2000psi (13.8Mpa) |
|
|
SG |
Range 3~8: 2000psi (13.8Mpa) Range 9: 4500psi (31.0Mpa) Range 0: 7500psi (51.7Mpa) |
|
|
SA |
Range 4: 58psi (400Kpa) Range 5: 218psi (1500Kpa) Range 6: 435psi (3000Kpa) |
|
|
SH |
Range 4~7: 4500psi (31.0Mpa) |
|
|
The Overpressure Limits |
SG |
13.8Mpa (Gauge Pressure) Range 3~8 31.0Mpa (Gauge Pressure) Range 9 51.7Mpa (Gauge Pressure) Range 0 |
|
SA |
13.8Mpa |
|
|
Static And Unidirectional Overpressure Ranges |
SR |
3.45 Kpa (Absolute Pressure) ~ 6.89Mpa (Gauge Pressure) |
|
SD |
3.45 Kpa (Absolute Pressure)~ 13.8Mpa (Gauge Pressure) |
|
|
SH |
3.45 Kpa (Absolute Pressure)~ 31.2Mpa (Gauge Pressure) |
|
|
Explosion-Proof Type |
Safety Type, Explosion Proof Type |
|
|
Electromagnetic Compatibility |
In Line With The GB/t 18268-2010 |
|
|
Level Of Protection |
IP65/IP67 |
|
|
Humidity Range |
0%~95%Rh |
|
Performance Index
|
Precision |
The Accuracy Is ±0.075% Of The Regulated Range.If The Range Regulated Is Less Than 1/10 Of The Maximum Range, The Accuracy Is ±[0.025 + 0.005 × (Maximum Range/Range Regulated)]% |
|
|
Temperature Influence |
Every 28℃(50 ° f)Range ≥0.1 Maximum Range: ±[0.019% Maximum Range + 0.125% Maximum Range]Adjustable Range < 0.1 Max Range: ±[0.025% Max Range + 0.125% Adjustable Range] |
|
|
Stability |
Not Exceeding ±0.1% Of The Maximum Range Within 12 Months |
|
|
Static Pressure Influence |
SR |
±0.5%/ 6.89Mpa Of The Maximum Range |
|
SD |
±0.25%/13.8Mpa Of The Maximum Range |
|
|
SH |
±0.25%/31.0Mpa Of The Maximum Range |
|
|
Installation Position Influence |
The Maximum Zero Drift Is 0.24Kpa |
|
|
The Power Influence |
Less Than 0.005%/v Of The Calibration Range |
|
|
Vibration Influence |
Any Axial 0 ~ 200hz, The Error Is ±0.05%/g Of The Maximum Range |
|
|
Electrical Connections |
1/2-14 NPT Internal Thread |
|
Process Connection |
1/4-18 NPT Internal Thread |
|
Structural Materials |
Isolation Diaphragm: 316l Stainless Steel, Hasteley C, Monel Or Tantalum Exhaust/Drain Valves: 316 Stainless Steel, Hastelloy C Or Monel Flanges And Transition Joints: 316 Stainless Steel, Hasteley C Or Monel Contact Medium "o" Ring: Nitrile Rubber, Fluorine Rubber Filling Fluid: Silicone Oil Bolts: Galvanized Carbon Steel Electronic Housing: Low Copper Aluminum Alloy Coating: Polyester Epoxy Resin |
|
Weight (Excluding Options) |
With Display Model:3.6kg Without Display Model:3.3kg |
jiang.yuhang@microcyber.cn +86 18304037682
Contact : Yvette Jiang, +86 18304037682
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Digital Display Pressure Transmitter Search in a category : Equipment goods Search in a category : display, transmitter, pressure, digital |
Tuesday, February 03, 2026
<< Stable Operations, Continued Growth >> 5 Axis Machining Center-Eumach Co., Ltd. Eumach Co., Ltd. is a fresh business of machine tool industry, and concentrates on manufacturing 5 axis machining center, vertical horizontal machining center, universal milling machine...
Eumach Co., Ltd.
- 429 - Taichung City
- +886 4 2581 0031
Sunday, July 26, 2015
Specific Gravity at 20c; 0.916-0.923 Refractive Index at 20c; 1472-1474 Iodine Value; 120-143 Unsaponification; 2.5 Max Free Fatty Acid; 0.1% Max. as Oleic Acid Peroxide Value; 1 Max. (meg/kg) Color; Max. 2 Red (on 5 Lovibond cell) Moisture; 0.1% Max Appearance; Clear and...
TRADEX GROUP CO LTD
- 15140 - opburi
- +6661409539
Tuesday, February 03, 2026
Quantity : A définir - Price : A définir
CofranexInternational is a French companyspecialized in the distribution of food products. Through arange of over6000 references in dry goods (groceries, liquids, non-food and DPH), fresh, frozen fruits and vegetables, we offer our customers all theFrench taste at the best price...
COFRANEX International
- 75008 - Paris
- +33 (0)6 52 47 91 75




