Equipment goods
Digital Display Pressure Transmitter
|
Measure Object |
Liquid, Gas, Stream |
|
Power |
9~32V DC(FF,PA) 9~32v DC (FF, PA Explosion-Proof Instrument) 11.9~42 V DC (HART) 11.9~30 V DC (Hart Explosion-Proof Instrument) |
|
Output |
Analog: 2 Wire 4~20ma Digital: HART, FF AND PA Signal |
|
Load Resistant |
0~1500ohm (Common) 250~550ohm (With Hart) |
|
Insulation |
Input And Output Insulating Voltage: 500vrms (707vdc) |
|
Display |
Optional 6 Bits Digital Number Or 5 Bits Characters LCD Display |
|
Temperature Scale |
Work Temperature: -40 ~ 85℃ (No Display) -30 ~ 70℃ (Display) -30 ~ 60℃ (Explosion-Proof) Store Temperature: -40 ~ 100℃ (No Display) -40 ~ 85℃ (Display) |
|
Allowed Media Temperature Measured |
-40 ℃~ 110 ℃ (Type Name Include ‘IC‘) -40 ℃~ 149 ℃ (Silicone Oil) -40 ℃~ 204 ℃ (Sylthlem800) -18 ℃~ 204 ℃ (Inert Liquid) -40 ℃~ 104 ℃ (Others) |
|
Humidity Scale |
5%~100%Rh |
|
Start Time |
≤ 5 Seconds |
|
Refresh Time |
0.2 Seconds |
|
Dump Adjusting |
Time Constant 0~15 Seconds |
|
Change Of Cavity |
< 0.16 Cm3 |
|
Static Pressure Limit |
SR |
Range 2: 1000psi (6.89Mpa) |
SD |
Range 3~8: 2000psi (13.8Mpa) |
|
SG |
Range 3~8: 2000psi (13.8Mpa) Range 9: 4500psi (31.0Mpa) Range 0: 7500psi (51.7Mpa) |
|
SA |
Range 4: 58psi (400Kpa) Range 5: 218psi (1500Kpa) Range 6: 435psi (3000Kpa) |
|
SH |
Range 4~7: 4500psi (31.0Mpa) |
|
The Overpressure Limits |
SG |
13.8Mpa (Gauge Pressure) Range 3~8 31.0Mpa (Gauge Pressure) Range 9 51.7Mpa (Gauge Pressure) Range 0 |
SA |
13.8Mpa |
|
Static And Unidirectional Overpressure Ranges |
SR |
3.45 Kpa (Absolute Pressure) ~ 6.89Mpa (Gauge Pressure) |
SD |
3.45 Kpa (Absolute Pressure)~ 13.8Mpa (Gauge Pressure) |
|
SH |
3.45 Kpa (Absolute Pressure)~ 31.2Mpa (Gauge Pressure) |
|
Explosion-Proof Type |
Safety Type, Explosion Proof Type |
|
Electromagnetic Compatibility |
In Line With The GB/t 18268-2010 |
|
Level Of Protection |
IP65/IP67 |
|
Humidity Range |
0%~95%Rh |
Precision |
The Accuracy Is ±0.075% Of The Regulated Range.If The Range Regulated Is Less Than 1/10 Of The Maximum Range, The Accuracy Is ±[0.025 + 0.005 × (Maximum Range/Range Regulated)]% |
|
Temperature Influence |
Every 28℃(50 ° f)Range ≥0.1 Maximum Range: ±[0.019% Maximum Range + 0.125% Maximum Range]Adjustable Range < 0.1 Max Range: ±[0.025% Max Range + 0.125% Adjustable Range] |
|
Stability |
Not Exceeding ±0.1% Of The Maximum Range Within 12 Months |
|
Static Pressure Influence |
SR |
±0.5%/ 6.89Mpa Of The Maximum Range |
SD |
±0.25%/13.8Mpa Of The Maximum Range |
|
SH |
±0.25%/31.0Mpa Of The Maximum Range |
|
Installation Position Influence |
The Maximum Zero Drift Is 0.24Kpa |
|
The Power Influence |
Less Than 0.005%/v Of The Calibration Range |
|
Vibration Influence |
Any Axial 0 ~ 200hz, The Error Is ±0.05%/g Of The Maximum Range |
Electrical Connections |
1/2-14 NPT Internal Thread |
Process Connection |
1/4-18 NPT Internal Thread |
Structural Materials |
Isolation Diaphragm: 316l Stainless Steel, Hasteley C, Monel Or Tantalum Exhaust/Drain Valves: 316 Stainless Steel, Hastelloy C Or Monel Flanges And Transition Joints: 316 Stainless Steel, Hasteley C Or Monel Contact Medium "o" Ring: Nitrile Rubber, Fluorine Rubber Filling Fluid: Silicone Oil Bolts: Galvanized Carbon Steel Electronic Housing: Low Copper Aluminum Alloy Coating: Polyester Epoxy Resin |
Weight (Excluding Options) |
With Display Model:3.6kg Without Display Model:3.3kg |
jiang.yuhang@microcyber.cn +86 18304037682
Good deal: buying from seller
This page is about importers and exporters of Digital Display Pressure Transmitter Search in a category : Equipment goods Search in a category : pressure, digital, transmitter, display |
Wednesday, June 04, 2014
Max Capacity 150KG/330.8LB available for weight scale Unit KG/LB available for weight scale Automatic Power ON/OFF Yes Battery 3V CR2032 Lithium battery(1PCS) Resolution 100g Display size 74x30mm Product Size 280x230x22mm Color Box Size 290x240x32mm Equipped with...
Saturday, December 28, 2024
<< Stable Operations, Continued Growth >> 5 Axis Machining Center-Eumach Co., Ltd. Eumach Co., Ltd. is a fresh business of machine tool industry, and concentrates on manufacturing 5 axis machining center, vertical horizontal machining center, universal milling machine...
Friday, December 20, 2024
Quantity : Customers - Price : Negotiable
Aerona Beauty manufactures quality Professional Cuticle Nippers. All our Cuticle Nippers are especially made from the finest Japanese J1, 410 Stainless Steel to perform beyond limits. Our range includes Cuticle Nippers with Back Lock,Double & Single Springs, Nail Nippers having...