CSD-N150 Sliding Door
CSD-N150 is a non-insulated system for aluminium sliding doors with a modern flat design. The system meets a wide range of needs using common profiles for the construction of simple sliding typologies. Ideal solution for large spans and warmer climates.
Overview of CSD-N150 Sliding Door
|
System |
Sliding Door(Non-Thermal Break) |
|
Model No. |
CSD-N150 |
|
Material |
Aluminum Alloy/Glass |
|
Hardware |
Chinese top brand(Kin Long)/Germany brand |
|
Glass Type |
Tempered/Float/Laminated/DGU/Ceramic Fritted/LowE/Tinted/Reflective/Heat Soak |
|
Cooperated Glass Brand |
Vitro(Formerly PPG)/Pilkington/Xinyi(SYG)/Yaopi(SYP)/Fuyao/Southglass(SG)/Kibing/CNG/ TaiwanGlass |
|
Surface Treatment |
Powder Coating/PVDF/Anodized/Electrophoresis/Wooden Grain |
|
Profile Brand |
6063-T5/6063-T6 |
|
Thermal Profile |
Non-Thermal Break |
|
Standards |
In Compliance With ASTM/AS/NZS/AAMA/NFRC/EN/BSI/ISO |
|
Application |
Residential Apartment, Villa/Commercial Hotel, Mall, Office, Public Organization |
|
System Customization |
Available |
Data of CSD-N150 Sliding Door
Testing Data of CSD-N150 Sliding Door
|
Test |
Pressure |
Results |
|
Preloading(Clause 8.2.2 of AS/NZS4284: 2008) |
+1.81kpa |
No separation, plastic deformations or deleterious was observed. |
|
-2.68kpa |
||
|
Preliminary Water Test under Static Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
+543kPa |
There were no leaks. |
|
Preliminary Water Test under Cyclic Pressure (Clause 8.2.3 of AS/NZS 4284: 2008) |
272-300-272 (Pa) |
There were no leaks. |
|
362-724-362 (Pa) |
||
|
543-1086-543 (Pa) |
||
|
Structural Test at Serviceability Limit State Wind Pressure (Wsls)(Clause 8.3 of AS/NZS 4284: 2008) |
+1.81kpa |
No glass breakage, no collapse and permanent deformation were observed. Deflections of mullions and transoms as well as glass panel were within the allowable deflection limits. |
|
-2.68kpa |
||
|
Air Infiltration Test (Clause 8.4 of AS/NZS 4284: 2008) |
+/-150Pa |
The rate of air leakage of the specimen was within the allowable values. |
|
Operating force test (AS 2047-2014, Clause 2.3.2.4) |
-- |
The operating force of the specimen was within allowable value. |
|
Water Test under Static Water Test under Static 4284: 2008) |
+543Pa |
There were no leaks. |
|
Water Test under Cyclic Pressure (Clause 8.6 of AS/NZS 4284: 2008) |
272-300-272 (Pa) |
There were no leaks. |
|
362-724-362 (Pa) |
||
|
543-1086-543 (Pa) |
||
|
Structural Proof Test at Ultimate Limit State Wind Pressure (Wuls) (Clause 8.8 of AS/NZS 4284: 2008) |
+2.79kpa |
No collapse of the test specimen was observed under the specified pressure. |
|
-4.15kpa |
Thermal Data of CSD-N150 Sliding Door
|
NFRC procedures |
NFRC100SB, NFRC200-2010 and NFRC500-2010 |
|
Software tools |
THERM 7.4.3.0 and WINDOW 7.4.6.0 |
|
Configuration |
6mm LB13-45HS+12A+6mm Clear HST |
|
Panel Dimension |
1900mm Wide x 2750mm High |
|
Frame |
Painted Aluminum |
|
Panel U-value |
3.771W/m2k |
|
Visible Light Transmission |
0.28 |
|
Condensation Resistant |
19.1 |
Frame Data of CSD-N150 Sliding Door
|
Parts Location |
Frame Area/m2 |
Edge Area/m2 |
U-Value(Frame) |
U-Value(Edge) |
|
W/m2k |
W/m2k |
|||
|
Left Header |
0.121 |
0.049 |
7.9102 |
2.2952 |
|
Left Jamb |
0.326 |
0.154 |
11.1172 |
2.0309 |
|
Right Header |
0.118 |
0.049 |
9.5335 |
2.1194 |
|
Mullion |
0.117 |
0.3 |
22.6254 |
1.9365 |
|
Right Jamb |
0.341 |
0.154 |
8.7912 |
2.1402 |
|
Left Sill |
0.11 |
0.049 |
7.784 |
2.2897 |
|
Right Sill |
0.113 |
0.049 |
11.4681 |
2.1552 |
Glass Data of CSD-N150 Sliding Door
|
Glass Data: 6mm LB13-45HS+12A+6mm Clear HST |
|||||||
|
Visible Light |
SHGC |
SC |
NFRC U-value |
STC |
|||
|
W/m3k(Argon) |
|||||||
|
T% |
R-out% |
R-in% |
Winter |
Summer |
|||
|
40 |
20 |
13 |
|
0.26 |
1.43 |
1.36 |
36 |
Benefits of CSD-N150 Sliding Door
High security level
Modern design
Slim lines for sliding typologies with maximum visibility
Great ease of use and high functionality
Increased static loads and functionality in case of severe weather conditions
Exceptional quality with certified performances
Exceptional sound insulation
Ideal for wide spans
Recommended CAS Facade Products
Our products are designed to snap together perfectly, organically or with the help of couplers. This ensures a streamline design throughout your project. Below is a list of compatible products.
As one of aluminium sliding doors manufacturers, we will do our best to meet all the needs of customers.
If you want to know more details of residential building facade design, please visit our website.
Contact : facade Cas, 0757 87655056
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of CSD-N150 Sliding Door Search in a category : Everything else / Bulk Search in a category : n150, sliding, door |
Wednesday, January 13, 2016
Established in 2000, Focus CNC Co., Ltd. provides series of CNC Lathe Machinery, CNC Lathe, live tool CNC Lathe, mill turn Lathe and CNC turning machine. Due to our principle of “Humanity, Technology and Precision” in mind, we keep breaking through to become one leading Industry...
Focus CNC Co., Ltd.
- focus.cnc1999
- 428 - Taichung City
- +886 4 2560 6067
Wednesday, March 23, 2016
12 balls package £1,900.00 Guarantee: We test each ball for to ensure the ball seamed exactly well. Delivery time: arrive within 14 days after payment Logo printing: free Warranty: 1 year quality guarantee and free repair kit. About PVC/TPU inflatable body zorb ball : Q: What is...
zorbingfootball
- NW61HS - London
- 720 316 2788
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gland Packing Globe Valves ( Straight- Through Type) DIN Standard Gland Packing Globe Valve DIN Globe valve DIN Stop valve DIN Absperrventil Durchgangsform DIN Válvulas de globo DIN ventil uzavírací s klasickou ucpávkou přímý DIN Standard seteventiler med pakkboks (rett løp...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935




