Correct Operation And Maintenance Of The Pipettes
How important it is to conduct your own experiments with a handy pipette! However, even the most perfect instrument needs proper operation and maintenance.
When using a pip ette, we should pay attention to the following points:
1. Do not turn the button out of the range; otherwise, it will jam the internal mechanical device.
2. When the liquid is absorbed, should be kept in a vertical state, and the pipette tip should be inserted 2-3 mm below the liquid level.
3. Prevent the reverse suction and corrode the piston spring.
4. After use, it is vertically hung on the holder to prevent falling.
5. It is better to clean and calibrate pipette regularly.
6. Check whether there is leakage when using.
How to clean a pipette?
Use soap water or 60% isopropyl , rewash with distilled water, natural drying. Before sterilizing, make sure it is able to adapt to high temperature.
If there is leakage, the reasons are as follows:
1. Whether the pipette tip and the pipette matches;
2. Whether the spring piston is normal;
3. If it is a volatile liquid, it may be a vapor pressure problem.
Contact : Bruce Lu, +86 29 89284429
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Correct Operation And Maintenance Of The Pipettes Search in a category : Everything else / Bulk Search in a category : operation, correct, maintenance, pipettes |
29010 PhonesReport abuse
Friday, April 05, 2013
Quantity : 250 comman - Price : 0,60 €
Anti-glare (matte), hard-coated, dirt-repellent, easy to install and can be removed without leaving any traces The screen protector is designed for application on electronic screens and offers reliable protection against scratches and dirt. The film surface is dull and to mitigate...
QUAD LOGISTICA S.L
- 29010 - MALAGA
- +34 9 12 69 23 06
59590 B2B ServicesReport abuse
Wednesday, September 14, 2016
Quantity : 5000 - Price : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
999077 Equipment goodsReport abuse
Saturday, June 29, 2013
Quantity : 1 - Price : USD2310
Wellhead Function: During drilling operation, casing head is an important equipment for controlling wellhead pressure. Raw Material: Carbon steel or low alloy steel comply with API Spec.6A. Applied Casing Program: 20"×13-3/8"×9-5/8"× 7"×5-1/2", or as user's requirements. Bottom Connection...
Kergy Oilfield Equipment Co.,LTD
- kergy
- 999077 - HongKong
- 86 15399023516
