POLYAMIDE - 367 ads

Wednesday, November 29, 2023

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, forinjection moulding. PA6 6 GF30 is a common nylon material known for its high strength and durability, as well as provides enhanced mechanical properties. The glass fiber reinforcement of PA66 30 GF plastic improves...

Wednesday, November 29, 2023

Material PA 66 GF 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Wednesday, November 29, 2023

PA6 6GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding Typical Application of Anmei Group PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with...

Friday, November 10, 2023

Since our strength is grip socks, our baby socks well kept this advantage. Baby cozy socks fall off easily during all crawling, napping, and playing. Elasticity at the ankle ensures that our child socks are retained during playing, and a non-slip application on the sole helps prevent slipping...

Thursday, October 26, 2023

As an important material, enameled copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent...

Tuesday, October 10, 2023

Quantity : 700 tons/y - Price : $4-10/kg

PTFE O Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions...

Tuesday, September 26, 2023

PA66 GF 15 Heat Stabilized (A2006C, A2016C) for Engineering PlasticsPA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.Anmei PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature...

Tuesday, September 26, 2023

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics of your product...

Tuesday, September 26, 2023

Why Nylon Has High Tensile Strength Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering PlasticsUsing Polyamide 66 as the basic resin, the nylon 66 tensile strength is obtained by blending and modifying with the addition of a toughening agent. The flexural strength...

Tuesday, September 26, 2023

Nylon66 PA66 Heat Stabilized Description Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, goodprocessing fluidity...

Wednesday, September 06, 2023

Price : USD 150- 600

The organic membrane is a material having a selective separation function, and when there is a driving force on both sides of the membrane (such as a pressure difference, a concentration difference, a potential difference, etc.), the raw material component selectively permeates the membrane...

Friday, September 01, 2023

Price : 0.1-1USD

Custom Ankle ankle socks suppliers Sporty ankle length socks are comfortable, and their design literally means they can run around. Ankle cut socks can be worn with formal, casual or sportswear. This is the versatility of low ankle socks, which is why it is preferred! It is also easy...

Thursday, August 24, 2023

Spherical Roller Bearings Self-aligning roller bearings can adapt to the severe environment and working condition, are mainly designed to bear very heavy radial loads and heavy axial loads, have extremely high impact load resistance, and can realize full-capacity load through self-aligning...

Wednesday, August 23, 2023

3D printed nylon parts can be used for product verification or directly used as functional products. The product is 3d prototype printing with light weight and shorter production cycle. It has great application space in automobile, aerospace, art creation, medical treatment and other fields...

Friday, July 14, 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Friday, July 14, 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Friday, July 14, 2023

What Is PA6 ? As an engineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products. We have nylon 6 modified plastics of heat-resistant, reinforced, toughened, flame-retardant...

Friday, July 14, 2023

The development of air brake hoses has been focused on improving the safety, durability, and performance of these critical components in the air brake system. Here are some recent developments in air brake hoses: Advanced Materials: New materials have been developed for air brake...

Wednesday, May 31, 2023

Quantity : 1000t/m

PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa6 6gf35, that is, 35% glass fiber is added to nylon 66. Typical Application of pa 66 gf 35 (A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...

Wednesday, May 31, 2023

Quantity : 1000t/m

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, for injection moulding. Typical Application of pa6 6 gf30 Heat Stabilized (A2006F) The material pa66 30 gf thermal stability typically works for automobile engines, motor accessories such as engine covers, cooling fans...

Wednesday, May 31, 2023

Quantity : 1000t/m

Material pa6 6 gf 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Wednesday, May 31, 2023

Quantity : 1000t/m

PA66GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with high tensile...

Saturday, May 20, 2023

This product is a two-component epoxy anti-rust paint composed of epoxy resin, zinc phosphate and titanium dioxide or iron oxide red and other pollution-free anti-rust pigments and polyamide curing agents, mainly used as a primer for fireproof coatings and primer for steel surface...

Wednesday, May 10, 2023

Mens bamboo briefs underwear made in 95%bamboo viscose 5% spandex single jersey, basic briefs pattern and shaped, polyamide microfiber elastic waistband. Bamboo Briefs Mens-Product Details Body 95% bamboo viscose 5% spandex Waistband polyamide microfiber elastic Color solid black ...

Sunday, May 07, 2023

Quantity : 100k - Price : $0.005-$3.4

PCB board to board connectors and SMD board to board connectors are used to accurately interconnect printed circuit boards (PCBs) in a stackable manner. They can accommodate various types of PCB orientations, relative distances, and space constraints to allow for design flexibility...

Saturday, May 06, 2023

Quantity : 50000sets/ - Price : 10-500USD/SET

The design of VXO double angular contact ball bearings corresponds to two single row angular contact ball bearings arranged back-to-back. Features of double row angular contact ball bearing skf Less axial space Can be used for applications where two single row angular contact ball...

Friday, May 05, 2023

The characteristics of plastic cnc machining china material are defined by the melting point temperature (150 ° to 450 °) and the use environment (ordinary plastics and engineering plastics). When CNC is processing plastic products of plastic CNC service, the material deformation...

Saturday, April 29, 2023

Price : 200,000 USD~1,500,00

Polymer is the most commonly used pa12 3d printing material due to the relatively low cost of prototyping and production compared to other 3D printing materials. - PA 12 nylon powder PA12 is made from fine polyamide powder. Compared to traditional 3D printed plastic material, PA12...

Friday, April 28, 2023

Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm booster pump are ideal for indoor RO system applications and DIY water booster systems. The diaphragm pump for water purifier can be used as long as it is plugged into the municipal power supply...