P355M|P355ML1|P355ML2|PRESSURE - 13364 ads

Wednesday, April 22, 2015

Main technical data of Vacuum silicon carbide sintering furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RHIS-160 500×800 2400 7×10-1 1...

Wednesday, April 22, 2015

Main technical data of Silicon carbide sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSG-446 400×400×600 1800 6×10-1 0.5 ±5 RVSG-559 500×500×900 1800 2×10-1 0.5 ±5...

Wednesday, April 22, 2015

Main technical data of 1800 degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSG-446 400×400×600 1800 6×10-4 0.5 ±5 RVSG-4413 400×400×1300 1800 6×10-4 0...

Wednesday, April 22, 2015

Main technical data of 1600C degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSG-75G 300×250×500 1600 2×10-3 0.5 ±5 RVSG-100G 400×350×800 1600 2×10-3 0...

Wednesday, April 22, 2015

Main technical data of 1450 degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSG-6512 600×500×1200 1450 2×10-3 0.5 ±3 RVSG-8312 800×300×1200 1450 2×10-3 0...

Wednesday, April 22, 2015

Main technical data of 1300 degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Cooling rate 1100℃-150℃ (min) Temperature Uniformity(℃) RVS-75G 300×250×500 1300 2×10-3 0.5 ≦20 ±3 RVS-100G...

Wednesday, April 22, 2015

Cone crusher and noise reduction of dust the outstanding achievements of fluidized bed jet mill grinding chamber is surrounded by a high pressure air inlet nozzle specially designed, the clean and dry compressed air from the jet nozzle through the formation of supersonic flow, the...

Wednesday, April 22, 2015

Because the sand source of tension, many units are often only purchase what materials to use what material, some unqualified sand, especially fine sand, super fine sand is used for occasions.Because the sand source of tension, many units are often only purchase what materials to...

Wednesday, April 22, 2015

(4) the mobile crusher crusher configuration of high performance, high crushing efficiency, quality of the crushed product versatility, excellent performance, has broken, delicate and reasonable structure design excellence.(4) the mobile crusher crusher configuration of high performance...

Wednesday, April 22, 2015

When stepped on a little, otherwise difficult to work Zhengzhou ChangLei Machinery Equipment Co., Ltd. is a sales of Dachang HeLuanShi pressure blasting machine, a set of scientific research, production, sales as one of the large-scale joint-stock enterprisesWhen stepped on a little...

Tuesday, April 21, 2015

Quantity : 1000 - Price : negotiation

sapphire blades/jewel blade in Sen Hishi which are used in various control applications of hydraulics, water, chemicals and airflow. A well-controlled process ensures proper edges for inflow of material, followed by a precisely centered and polished hole to ensure proper flow of water or air...

Monday, April 20, 2015

Quantity : 1000 - Price : negotiation

sapphire and ruby rods/quartz rods Typical Applications: 1 Ultra-high pressure waterjet cutting; 2 Gas/liquid control switch; 3 Blood corpuscle analyzer; 4 ink-jet printing; 5 Flow Mete ; Details for reference: Surface roughness: Rz0.05 Material: Sapphire,magnesium fluoride,germanium...

Sunday, April 19, 2015

Quantity : 1000 - Price : 3,00 €

Offer Advertise for Agency Blower DC Fan,Blower Fan wholesale 40X40X20mm Shenzhen Huaxia Guangda Electronic Co.,Ltd.professional manufacturer of Advertise for Agency Blower DC Fan,Blower Fan wholesale AC Fan,CPU coolers, DC brushless fans, CPU cooling fan equipments, computer case fans...

Sunday, April 19, 2015

Price : 3,00 €

Offer Blower DC Fan Export,China Best Blower Fan 40X40X20mm Shenzhen Huaxia Guangda Electronic Co.,Ltd.professional manufacturer of Blower DC Fan Export,China Best Blower Fan AC Fan,CPU coolers, DC brushless fans, CPU cooling fan equipments, computer case fans, computer coolers...

Sunday, April 19, 2015

Quantity : 100 units - Price : Negotiable

Hitop is an ISO 9001: 2000 certified, privately owned mold manufacturer with a state-of-the-art production plant in China. Hitop gives you the benefits of lower costs coupled with the high engineering and production standar ds expected in the European and North American. The ability...

Sunday, April 19, 2015

Price : US $2.13-2.64

Product Description LED tube is green energy-saving products.No ultraviolet ray, infrared ray, radiation, and mercury pollution. Lower power consumption, long lifespan, high efficiency, high brightness, low heat.It is sturdy and durable, with good seismic behavior and pressure resistance...

Sunday, April 19, 2015

Price : US $1.99-2.67

Product Description LED tube is green energy-saving products.No ultraviolet ray, infrared ray, radiation, and mercury pollution. Lower power consumption, long lifespan, high efficiency, high brightness, low heat.It is sturdy and durable, with good seismic behavior and pressure resistance...

Sunday, April 19, 2015

Price : US $2.07-2.44

Product Description LED tube is green energy-saving products.No ultraviolet ray, infrared ray, radiation, and mercury pollution. Lower power consumption, long lifespan, high efficiency, high brightness, low heat.It is sturdy and durable, with good seismic behavior and pressure resistance...

Saturday, April 18, 2015

1. The pellet mill china has a vertical die to make feeding vertically which meansn o arching of raw material occers and it is easy for heating dissipation. 2. pellet mill china is fixed while the rollers rotateing. Materials distributed centrifugally and evenly. 3. Double-layer...

Saturday, April 18, 2015

Price : USD2.50/pcs

10cm (W) x 4.5m (L) with the pad 10x18cm Compositions: elastic bandage, non-stick pad, closure clip and clamp bar Advantages: 1. Effective bleeding control 2. Firm fixing 3. Convenient operation 4. Multi-angle wrapping Technical information: 1. Highly absorbent pad that offers...

Thursday, April 16, 2015

Quantity : 1set

- Specifications - Circumference Dryer With Double Layer Mesh Belt Is Applicable For Aqua Feed And Extruded Feed Drying.It Got CE And ISO 1.Flow of hot air in dryer can be changed according to specialty and requirements of drying, thus reach the best drying effect; 2.Hot air...

Thursday, April 16, 2015

Quantity : 1set

- - 1. It has compact structure and small overall dimensions of transect and floor space can be saved re markably; 2. Head: Rubber covering technology is adopted for head pulley to increase friction coefficient and improve the driving efficiency; 3.Height of discharging section...

Thursday, April 16, 2015

Quantity : as you wan - Price : USD0.3-3

The A&Z foam padded medical fractre splint for first aid is built from a thin core of aluminum alloy, sandwiched between two layers of closed-cell foam. Freshly unrolled from storage, the splint is extremely pliable. Bent into any of three simple curves, it becomes extremely...

Thursday, April 16, 2015

The principle of pump pressure used by the water supply system promises a quick flow speed and even spray. Materials are feeding smoothly and safely with belt conveyor. Main components of electrical control system are all imported, which promises high performance and convenient operation...

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)

Wednesday, April 15, 2015

Quantity : 100 units - Price : Negotiable

Design －integrated design system －3D CAD / CAM lineup for wide range support of data formats －DFM: review of part design for manufacturability －MoldFlow Analysis －Experienced with design of die casting, silicon vulcanizing, injection (including low pressure inje ction, cloth...)