PARAMETER - 9147 ads

Thursday, June 18, 2020

For full turn-key pcb assembly, we take care of the entire process, including PCB manufacturing, procurement of components, continuous monitoring of quality and final circuit board assembly. For partial turn-key pcb assembly, the customer can provide related components, and the remaining...

Thursday, June 18, 2020

Description Industrial automation instrument is upgrading from traditional 4-20mA analog control signal to industrial fieldbus with digital communication function. HART bus had digital communication function and it's compatible with 4-20mA analog control signal. In the instruments industry...

Thursday, June 18, 2020

Description Discription of WirelessHART standard WirelessHART standard is developed together by HCF member companies, main wireless device manufacturers and industrial users under the guidance of the HART Communication Foundation (HCF). WirelessHART is a wireless mesh network communications...

Thursday, June 18, 2020

Description APC3 is an ASICs chip for PROFIBUS DP intelligent slave station development. APC3 supports the DPV0 part of the PROFIBUS DP standard. Features Compatible with VPC3 in mode DPVO, at the working voltage 3.3V compatible with SPC3LV, at the working voltage 3.3V Automatic indentifcation...

Thursday, June 18, 2020

Description G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It...

Thursday, June 18, 2020

Description Name: Modbus to DP Gateway Model: G0306 This gateway realizes the conversion function from Modbus RTU to PROFIBUS DP, making multiple slave station devices that conform to Modbus RTU communication regulation access to PROFIBUS DPnetwork. Modbus can be as master or slave...

Thursday, June 18, 2020

Description Product Name：Modbus to PA Gateway Product Model: G0307 The product realizes the converter function from Modbus RTU to PROFIBUS PA, and it shall multiple devices with Modbus RTU protocol to PROFIBUS PA network. Basic Parameter Bus Power 9~32VDC Modbus Power 24VDC(±20%)...

Thursday, June 18, 2020

- M0313 - Modbus-FF built-in module realizes the conversion function from MODBUS Protocol to Foundation Fieldbus F1 Protocol.It is one of the Microcyber M-serise modules,which have features of same size,same interface,easy to upgrade and easy to configure.It is an ideal choice for...

Thursday, June 18, 2020

Description WirelessHART smart wireless gateway is in charge of establishment, management and maintenance of WirelessHART network, and network optimization, to make the devices in the network work in the effective and safe situation. Meanwhile WirelessHART smart gateway integrates...

Thursday, June 18, 2020

Description Product Name: HART to Modbus Gateway Model No: G1003 The gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station...

Thursday, June 18, 2020

G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output...

Thursday, June 18, 2020

Model: G0306 This gateway realizes the conversion function from Modbus RTU to PROFIBUS DP, making multiple slave station devices that conform to Modbus RTU communication regulation access to PROFIBUS DPnetwork. Modbus can be as master or slave, and this function can be realized by...

Thursday, June 18, 2020

Description Product Name：Modbus to PA Gateway Product Model: G0307 The product realizes the converter function from Modbus RTU to PROFIBUS PA, and it shall multiple devices with Modbus RTU protocol to PROFIBUS PA network. Device Types According to Modbus interface, the gateway shall...

Thursday, June 18, 2020

G1013 HART to FF Gateway, designed by Microcyber Corporation is a gateway device for HART protocol and FF protocol. As HART master, G1013 HART to FF Gateway communicates with HART slave via HART interface, it can convert dynamic variables in the device to FF device variables output...

Thursday, June 18, 2020

G0310 Modbus to HART Gateway, designed by Microcyber Corporation is a gateway device for Modbus-RTU protocol and HART protocol. As Modbus master, G0310 Modbus to HART Gateway communicates with devices that have Modbus-RTU communication function via RS485 interface. It can convert...

Thursday, June 18, 2020

As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces...

Wednesday, June 17, 2020

NCS-FI105 fieldbus to current Converter is used to convert fieldbus signals to conventional analog signals. It can receive fieldbus signals, and convert them to 4-channel 4~20mA analog signals. NCS-FI105 is the converter between fieldbus system and control valve/other actuator. NCS-FI105...

Wednesday, June 17, 2020

NCS-TT108 smart temperature transmitter adopt PVC fire-retardant plastic shell, which can be installed in the control room. When it is required to be installed outdoors, outdoor Aluminum box, with a water-proof body and die-cast aluminum materials, must be selected. NCS-TT108 uses...

Wednesday, June 17, 2020

NCS-TT105 temperature transmitter is a new generation of smart transmitter with FF Hl, PROFIBUS PA or HART technology. NCS-TT105 transmitter integrates abundant function blocks and realizes not only normal measurement function but also complicated control strategy. NCS-TT105 supports HART...

Wednesday, June 17, 2020

NCS Series of Intelligent Transmitters are digital, intelligent, network-based, merged with advanced, reliable and stable sensor technology, to be designed as a new generation of Fieldbus Intelligent Transmitter. NCS Series of Intelligent Transmitter have been designed with high precision...

Wednesday, June 17, 2020

NCS-PT105IIS series Smart Pressure Transmitter with advanced, mature, reliable Piezoresistive Silicon Sensors has been designed meticulously by combining advanced microprocessor technology and digital capacitance measurement techniques. Its LCD can display many physical parameters...

Tuesday, June 16, 2020

NCS-TT106 temperature transmitter supports FF Hl, PROFIBUS PA and HART protocoIs and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance. Parameter Value Input Signal Resistance...

Tuesday, June 16, 2020

NCS-TT106 smart temperature module, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT106 transmitter integrates abundant function blocks and realizes not only general measurement...

Tuesday, June 16, 2020

CNC card free rotary cutting machine is a kind of equipment that can cut the remaining wood cores of the artificial straightened log or the family of card machines into veneers. The device is fixed by two rollers, and the cutter body base moves along the parallel guide rail. At the same time...

Tuesday, June 16, 2020

Quantity : 1000 pcs - Price : USD80-USD230

Current and voltage sensors Super-Fast Operating Speed Built-in BEC & OSD Full carbon fiber made Small(er) Size F4 Flight Controller This version of the Flip32 AIO uses improved components and design that will properly limit the voltage to the Mini OSD preventing voltage spike...

Tuesday, June 16, 2020

Quantity : 1000 pcs - Price : USD80-USD230

Now that you have chosen or designed a UAV frame, chosen the appropriate motors, propellers, ESCs and battery, you can start looking into choosing a flight controllers. A rc flight controller for a multi-rotor UAV is an integrated circuit normally made up of a microprocessor, sensors...

Tuesday, June 16, 2020

Quantity : 10000 Piec - Price : 150-10000

Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC bits are offered in a variety of sizes, blade count and cutter sizes. The Matrix body PDC bit is sintered with tungsten carbide powder. Gauge protection with natural diamond...

Friday, June 12, 2020

Quantity : 100 - Price : 45000-70000

Product Description Product introduction of Doing High efficiency waste motor oil refinery plant Doing High efficiency waste motor oil refinery plant can process waste engine oil, used motor oil, black oil, tire oil, plastic oil to clean diesel. This kind of diesel can be used to tractors...

Friday, May 29, 2020

In the range of 2-12 μm, germanium is the most commonly used material for the production of spherical lenses and windows for high efficiency infrared in imaging system. Germanium has a high refractive index (about 4.0 through 2-14μm band), usually do not need to be modified due to...

Friday, May 29, 2020

Quantity : 1pcs - Price : 40-200usd

Laser beam expansion or reduction is a common application requirement in most labs using lasers or light sources and optics. Users always find there are so many off-the-shelf laser beam expanders, however, hard to find one exactly fit their needs in terms of spectral range or expansion ratio...