Anti-corrosion rubber liner slurry pump, mining sludge pump

1,Mining rubber liner slurry pump

Technical parameter :

a) Caliber: DN65-DN300mm
b) Flow: 50-1800m3/hr
c) Head: 50-94 m
d) Rotate speed: 740-2900r/min
e)Working pressure: ≤3.6mpa

2,Productioin overview

ZH slurry pump is one of centrifugal pump, In order to meet the requirement on the development mining,

metallurgy, electric , mature experiences for many years on research& manufacture and application of

slurry pump. meanwhile based on technology introduction. We development the new generation production

with large capacity ,high head ,multi-stage mainly .the pumps of this type also may be installed in multistage

series.

3,Features :

a) Advanced hydraulic performance, CAD modern design , high efficiency and lower abrasion rate
b) wide passage, non-clogging and good performance of NPSH .
c) Expeller seal combined with packing seal and mechanical seal have be adopted to guarantee the slurry

from leakage.
d) The reliability design ensures long MTBF(mean time between events)
e) The metric bearing with oil lubrication, reasonable lubricating and cooling systems ensure the bearing to

be operated under the lower temperature.
f) The materials of wet parts had the good performance of anti-wearing and anti-corrosion, the pump can be

used for seawater ash-removing to prevent it from the corrosion of sweater, salt and mist ,and electrochemical

corrosion.
g) The pump can be operated in series with multi-stage within permissible pressure . the permissible maximum

working pressure is 3.6 Mpa

4,Main usage :

6x4 slurry pump widely used for handling the mixture contained of abrasive and corrosive solids in electric

power, metallurgy ,mine, coal, constructional material and chemical industry departments especial for removing

ash and sludgein electric power station.