POLYETHER - 78 ads

Friday, May 31, 2024

Quantity : 1000 ton/m - Price : 1-3usd/kilogram

This product is suitable for polyester, polyamide, such as polyvinyl chloride staple fibre spun synthetic fiber spinning static elimination, with excellent antistatic effect. Antistatic agent for textile can be used alone, or with other does not contain the anionic surfactant oil...

Friday, May 31, 2024

Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed for national defense and cutting-edge technology and development but later it has gradually extended to civil use, which is generally...

Wednesday, May 08, 2024

Quantity : 2000 tons/ - Price : 0.71-8.47 USD

POE (Polyolefin Elastomer) POE (polyether ether ketone) is a thermoplastic elastomer with good wear resistance, oil resistance, low-temperature resistance, and chemical corrosion resistance. Types of POE Resin POE (Polyolefin Elastomer) is a versatile material known for its exceptional...

Tuesday, April 16, 2024

Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable products to pass the flame retardant test requirements of VW-1 or IEC60332. Improve environmental resistance: According to the requirements...

Tuesday, April 16, 2024

TPEE Polymer (TPE Elastomero Termoplastico) is a block copolymer containing polybutylene terephthalate (PBT) hard segments and polyether soft segments. ATPolymer is a leading manufacturer and supplier in the tpe thermoplastic polyester elastomer market that offers all kinds of TPEE material...

Thursday, April 04, 2024

SiSiB® PC9108 is colorless clear liquid. Technical Data CAS No. 540-97-6 EINECS No. 208-762-8 Formula C12H36O6Si6 Molecular Weight 444.92 Boiling Point 245°C [760mmHg] Flash Point >76°C Color and Appearance Colorless clear liquid Density 25/25°C 0.959g/cm3 Refractive...

Wednesday, March 27, 2024

Polyether modified trisiloxane short chain polysiloxane. Compared to trisiloxane surfactant,it has better stability to hydrolysis. Typical Technical Properties of LA-17 Polyether Modified Short Chain Polysiloxane Appearance Colourless to light amber liquid Density (25°C, g/cm3) 1...

Wednesday, March 27, 2024

(It is a substitution of Silwet ECO and Xiameter(R) OFX-0309) A modified Trisiloxane and an silicone surfactant with super spreading property. It makes the water surface tension lower down to the 21.5mN/m at the concentration of 0.1%(wt.). Description of LA-14 A Modified Trisiloxane...

Wednesday, March 27, 2024

(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with super spreading property. It makes the water surface tension lower down to the 21.0mN/m at the concentration of 0.1%(wt.). Description of LA-11 A Modified Trisiloxane and an Silicone Surfactant...

Wednesday, March 20, 2024

[Brief information] In high temperature and high pressure conditions, stripping agent HD is to prompt the fabric dyes from high concentration to low concentration or solution to transfer, suitable for polyester dyeing repair color, leveling and stripping. [Main composition] Mixtures...

Wednesday, March 20, 2024

[Brief information] In high temperature and high pressure conditions, stripping agent HD is to prompt the fabric dyes from high concentration to low concentration or solution to transfer, suitable for polyester dyeing repair color, leveling and stripping. [Main composition] Mixtures...

Tuesday, March 12, 2024

Non-standard Parts Standard parts are parts produced in accordance with national standards (GB), industry standards, or foreign standards, mainly for the convenience of maintenance and replacement, such as screws, keys, flanges, bearings, etc. are standard parts, which can be bought...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining PEEK YS RAPID is a professional peek cnc machining manufacturer, peek cnc machining supplier in China. With more than ten years of CNC machining experience, we provide high-quality PEEK material machining services including glass filled china peek cnc machining service...

Tuesday, March 05, 2024

peek wire insulation PEEK in Wires & Cables PEEK has outstanding heat aging properties, good flame retardancy, self-extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still...

Thursday, February 08, 2024

Quantity : 22000tons/ - Price : 30-200CNY/KG

Fully support the cable pass UL 758/1581，80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Defender-TTM TPU series (1090T series) is halogen-free flame retardant polyether TPU material that ATP developed for cable jacket, with excellent weather resistance, flame retardancy, mechanical properties...

Thursday, February 08, 2024

Quantity : 22000tons/ - Price : 30-200CNY/KG

Thermoplastic Polyether Ester Elastomer Applicable: most kinds of medical equipment and special equipment lines that have biocompatibility, microorganism resistance, resistance, and other test requirements for sheath materials Thermoplastic Polyether Ester Elastomer Product Features: 1...

Wednesday, January 10, 2024

TTA3150 poly [(2-ethylene epoxide) - 1 2 cyclohexane diol] 2-ethyl-2 - (hydroxymethyl) - 1,3-propylene glycol ether is a typical cyclohexane diol epoxy resin, which contains very little chloride ions and chloride salts. It has the characteristics of high transparency, high heat resistance...

Thursday, December 28, 2023

Peek in Bearing Material Due to its excellent mechanical strength, dynamic fatigue resistance, high-temperature resistance, creep resistance, self-lubrication and thermal expansion coefficient comparable to metals, PEEK material is replacing more metals and other engineering plastics...

Thursday, December 28, 2023

Peek Tubing Material PEEK has great machinability, excellent dimensional stability, high-temperature resistance, creep resistance and hydrolysis resistance, can be used in a variety of machining ways, easy to control the tolerance. Applications: Sheets/ Rods/ Tubes/ 3D Filaments...

Thursday, December 28, 2023

PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environments, has wave permeability, dimensional stability and self-lubrication, keeps lower dielectric dissipation factor under various frequencies...

Friday, November 10, 2023

Quantity : 22000tons/ - Price : 30-200CNY/KG

SER—V Series UV Resistant HFFR TPU（105/℃ 80℃Heat-Resistance） Applied Fields: HFFR wire & cable with stable, long-term UV resistance property can pass UL105 /90 ℃ ℃ heat-resistance level. Characteristics: 1. UV resistance property: long-term, stable UV resistance property, E △ ＜1（0...

Friday, November 10, 2023

Quantity : 22000tons/ - Price : 30-200CNY/KG

As one of the professional China TPU material manufacturers and thermoplastic polyurethane suppliers, ATP's modified TPU for sale (TPU compounds/ thermoplastic polyurethane) and TPU cable jacket material technical ability are in a leading position in large-scale industrial applications...

Wednesday, November 08, 2023

Quantity : 9000tons - Price : $12~15/kg

TTA3150 poly [(2-ethylene epoxide) - 1,2-cyclohexanediol] 2-ethyl-2 - (hydroxymethyl) - 1,3-propylene glycol ether is a typical cycloaliphatic epoxy resin, which contains very little chloride ions and chloride salts. It has the characteristics of high transparency, high heat resistance...

Saturday, October 21, 2023

Natural peek material has outstanding heat aging properties, good flame retardancy, self-extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still keeps lower dielectric constant...

Friday, July 14, 2023

Improve flame-retardant performance: It has obtained UL 94V0 grade yellow card certification (1.5mm-6.0mm), which fully supports the finished cable products to pass the flame retardant test requirements of VW-1 or IEC60332. Improve environmental resistance: According to the requirements...

Friday, July 14, 2023

TPEE Polymer (TPE Elastomero Termoplastico) is a block copolymer containing polybutylene terephthalate (PBT) hard segments and polyether soft segments. ATP Polymer is a leading manufacturer and supplier in the thermoplastic polyester elastomer market that offers all kinds of TPEE material...

Friday, May 19, 2023

Polytetrafluoroethylene (PTFE), also known as teflon/teflon or plastic king, is a copolymer of tetrafluoroethylene monomer. First, it was developed for national defense and cutting-edge technology and development but later it has gradually extended to civil use, which is generally...

Wednesday, May 10, 2023

Fully support the cable pass UL 758/1581，80℃/105℃heat resistance test (113℃/136℃, 168Hrs) "Defender-TTM TPU series (1090T series) is halogen-free flame retardant polyether TPU material that ATP developed for cable jacket, with excellent weather resistance, flame retardancy, mechanical properties...

Wednesday, May 10, 2023

Thermoplastic Polyether Ester Elastomer Applicable: most kinds of medical equipment and special equipment lines that have biocompatibility, microorganism resistance, resistance, and other test requirements for sheath materials Thermoplastic Polyether Ester Elastomer Product Features: 1...

Tuesday, April 18, 2023

Plastic Injection Molds for Sale Packson is the OEM injection mold maker in china. We can supply custom injection molding parts. Our high quality and precision injection molding processes assist us to make molded parts from big, small to medium-sized components with good quality....