B2B Services

Common Quality Problems of Induction Quenching Machine and Ways to Improve Its Working

Performance

. Quality problems that often occur in high frequency hardening

The application of induction heating equipment in the quenching process is becoming more and more extensive. With the continuous improvement of this process, we generally encounter the following problems:

1. The workpiece is cracked: the heating temperature is too high and the temperature is uneven. Improper selection of quenching medium and temperature. Untimely and insufficient tempering. The hardenability of the material is high, the composition is segregated, defective, and contains excessive inclusions. The part design is not reasonable.

2. Uneven surface hardness: unreasonable structure design of the inductor, uneven heating, uneven cooling, poor material organization (with banded structure, partial decarburization), etc.

3. Surface melting: The sensor structure design is unreasonable. The parts have sharp corners, holes, bads, etc. Heating time is too long. There are cracks on the surface of the workpiece.

. Ways to improve the working performance of super audio frequency or high frequency induction heating power supply

In the process of actually applying super frequency or high frequency induction heating to induction quenching machine of machine-heated workpieces. In order to ensure the required performance and technical requirements, in addition to preventing the above defects, it is important to consider the state and technology of the parts before and after heat treatment. request etc.

According to the characteristics of the induction heating equipment, the structure of the inductor, the working conditions of the parts, etc., combined with the following precautions, the process flow and process parameters are correctly designed to produce qualified products.

1. During induction quenching machine of parts heated with induction heating equipment, the depth and distribution of the hardened layer should be reasonably determined, which affects the stress distribution of the parts and the fatigue strength of the surface.

2. The original structure of the workpiece quenched by induction heating equipment should be normalized or quenched and tempered to ensure that the hardened layer is uniform.

3. In the process of induction quenching machine of parts, reasonable design and selection of inductors is an important means to ensure uniform heating and cooling.

4. For parts that are prone to quenching cracks, a quenching medium with moderate cooling should be selected.

5. The high frequency induction heating machine should protect the threaded holes, pin holes and oil holes on the parts, such as blocking with copper material, to prevent the parts from overheating and quenching and cracking there.

6. During the high frequency hardening process of heating parts with a high frequency induction heating machine, in order to stabilize the structure, it must be tempered immediately after eliminating the internal stress.

If you are looking for a reliable induction heating manufacturer, don't hesitate to contact us!

Location : NO.688th South baoguang Road, Xindu District,Chengdu,Sichuan ,China, 610500 Chengdu,
Contact : Jun Yang Jun, (0086) 28 84211110

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Common Quality Problems of Induction Quenching Machine and Ways to Improve Its Working

Search in a category : B2B Services
Search in a category :
quenching, common, problems, machine, quality, ways, induction
Spain 41927 Second hand goods
Used copiers

Tuesday, May 31, 2022

Quantity : containers - Price : depend

Dear Sirs: IBC Copiers has since 1980 been exporting good used Copiers from Spain to the world-market. Today we export around 50.000 Copiers/year to more than 70 countries world-wide. We always keep in stock between 3.500 - 5.000 Copiers. All our machines are 220V - 50hz – 60 Hz and...

International business copiers

  • 41927 - MAIRENA DEL ALJARAFE
  • 691243256
  • 633747352
photo not available

Monday, July 18, 2011

Quantity : 3T/Month - Price : disc

we are a company for producing and exporting the Argan oil(edible and cosmetic one) . The company has a process of very modern production answering the international standards where the quality standards are respected in every stage of manufacturing. The company is one of the Moroccan...

JODOR ARGANE

Ivory Coast 00225 Food
photo not available

Friday, August 15, 2014

Quantity : 40 Tonnes

Notre equipe met en vente ces produits sortis de nos champs a prix competitifs defiant toute concurrence Graines de coton,Graines de soja, Graines de sésame, Maïs jaune Maïs rouge,Tourteau de graine de coton (plat) Tourteau de graine de coton(perle), Banane douce Graines de cacao...

GREENLAND

  • 00225 - ABIDJAN
  • +22 5 07 89 10 37