Everything else / Bulk

CMC HV

Price : USD3000-4000

KimaCell® CMC HV sodium carboxymethyl cellulose is generally believed that when the degree of substitution is around 0.6-0.7, the emulsifying performance is better, and with the increase of the degree of substitution, other properties are improved accordingly. When the degree of substitution is greater than 0.8, its acid resistance and salt resistance are significantly enhanced. . The main indicators to measure the quality of cmc degree of substitution (DS) and purity. Generally, the properties of CMC are different if the DS is different; the higher the degree of substitution, the stronger the solubility, and the better the transparency and stability of the solution. According to reports, the transparency of CMC is better when the degree of substitution is 0.7-1.2, and the viscosity of its aqueous solution is the largest when the pH value is 6-9.

Specification of CMC HV

Chemical name

Sodium Carboxymethyl Cellulose

Synonym

Cellulose gum, Carboxymethyl Cellulose, derivative of cellulose, Carboxymethylcellulose sodium salt, Na CMC, Sodium cellulose glycolate, Sodium CMC

CAS number

9004-32-4

Brand

KimaCell

Product Grade

CMC HV

Solubility

Water Soluble Cellulose ether

Physical form

White to off-white cellulose powder

HS code

39123100

Type Item

CMC-HV

Viscometer dial reading at 600r/min.

In distilled water

≥30

In 40g/L salt water

≥30

In saturated salt water

≥30

Fluid Loss(ml)

≤10.0

Remarks

Conforms to API Spec. 13A test methods

Purity

Min70%

DS

0.7-1.0

Viscosity

min. 30cps

Application of CMC HV

KimaCell® CMC HV sodium carboxymethyl cellulose is As a water-soluble colloid in the drilling mud system, CMC has a high ability to control water loss. Adding a small amount of CMC can control the water at a high level. In addition, it has good temperature resistance and salt resistance. It can still have a good ability to reduce water loss and maintain a certain rheology. When dissolved in brine or water, the viscosity hardly changes, especially suitable for the requirements of offshore drilling and deep wells. CMC-containing mud can make the well wall form a thin, hard, low-permeability filter cake, reducing water loss. After adding CMC to the mud, the drilling rig can get a low initial shear force, so that the mud can easily release the gas wrapped in it, and at the same time, the debris can be quickly discarded in the mud pit. Drilling mud, like other suspension dispersions, has a certain shelf life. Adding CMC can make it stable and extend the shelf life.

There are many cellulose ether manufacturers, but we are one of the best choices for you.

Location : HUAGUANG RD 188,ZHANGDIAN,ZIBO, 255000 SHANDONG,
Contact : CELL KIMA , 86 533 6281218

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
CMC HV

Search in a category : Everything else / Bulk
Search in a category :
Taiwan 334 Equipment goods
Two Copies Piston Volumatical Filling Machine FP-425

Thursday, December 12, 2024

Dual Piston Volumatical Filling Machine FP425. available for working independently on each system. Cylinder Volume can be customized based on customer's requirement. FEATURES: - Filling volume can be customized based on customer's requirement - Each piston system can be set independently...

Autopack Co.,Ltd

France 59590 B2B Services
ETM DIN GATE VALVE F7

Wednesday, September 14, 2016

Quantity : 5000 - Price : 50,00 €

Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)

ETM Armaturen

  • 59590 - Henri Durre
  • 86 577 67953935
Turkey 34000 Construction goods
Ciment turc de qualité

Friday, March 07, 2014

Quantity : la tonne - Price : 67 et 63 usd FOB cha

- CEM I 42,5R - Product Portland Cement Standard TS EN 197-1: 2002 Product Definition Portland cement is a product which is obtained as clinker resulting from mixing at suitable rates, grinding and firing raw materials such as limestone, marl, clay, iron ore, pyrite ash, bauxite, etc...

Makendi Worldwide

  • 34000 - istanbul
  • 06 01 05 42 72