CHAIN LUBE
7CF® Chain Lube Spray is an aerosol product that can form a Teflon high-strength adhesion lubricating coating after use, contains PTFE, synthetic high heat resistant lubricant. Providing strong lubrication, high anti-friction, excellent rust and corrosion for chains, open gears and exposed metal surfaces etc., Protect Chains from all angles using 360º Valve Spray.
CHAIN LUBE FEATURES & BENEFITS
Strong lubrication
High anti-friction and quiet noise
Excellent rust and corrosion inhibitor
Stays put on chains & moving parts
360º valve spray, protect Chains from all angles using 360º Valve Spray
Rich in Teflon, with high-performance solid lubricating properties
Non-Conductive
Compression, vibration and shock resistance
Good , excellent adhesion
No dripping, no side effects on O-ring
Anti-seize, anti-corrosion and waterproof
Even spray, fast and firm adhesion
Resistant to weak acid, alkali and corrosive working environment
Economical use, with the best coverage
CHAIN LUBE FEATURES & BENEFITS
CHAIN LUBE APPLICATIONS
Motorcycles, Bikes, Farm equipment.
Industrial: transfer belts, conveyor belts, motors, rollers, wheels, gears, chains & hoists, etc.
DIRECTIONS
Read entire label before using this product.
1
For best results, please use this product on a clean surface.
2
Shake well before spray.
3
Hold the can 5 to 10 cm away from the surface of Stationary or moving parts to be sprayed.
4
Gently spray a uniform layer of film and let it dry for 10 to 15 minutes.
5
Wipe off excess product with a clean cloth.
6
If necessary, repeat spraying.
PHYSICAL & CHEMICAL PROPERTIES
Physical and chemical properties |
|||
Propellant |
Hydrocarbon |
boiling point |
>50°C |
Odor |
slight aliphatic hydrocarbon odor |
Solubility (water) |
Negligible |
Appearance |
yellow oily turbid liquid |
Percent volatile |
>10% |
Internal pressure (25℃, MPa) |
0.3~0.5 |
Ejection rate (%) |
≥96 |
Heat resistance |
keep at 40℃ for 24h, return to room temperature, it can be used normally |
Cold resistance |
keep at (0-5℃) for 24h, return to room temperature, it can be used normally |
Specific gravity |
0.65 – 0.753 |
Corrosion (100℃, 3h, T3 copper sheet, 45 steel sheet) |
no green or black change |
PACKAGING SPECIFICATIONS
ITEM NO. |
Container size |
Optional sizes |
A-L-003 |
10oz(283g) |
3oz(85g), 6oz(170g), 8oz(226g) |
Shenzhen Sunrise New Energy Co., Ltd is a professional car care factory and chain lube factory, we provide industrial chain grease, industrial chain lubricant, chain bar lubricant, chain & cable lube, lubricant chain, industrial chain lube, spray lubricant and etc. Want to know chain oil price or more? Contact us.
Contact : tries 7cfindus, 0755 86922999
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of CHAIN LUBE Search in a category : Decoration Search in a category : chain, lube |
Saturday, February 20, 2016
Quantity : 100 MT PER - Price : 2000 usd per mt CIF
Hemp seeds Product Name: Hemp seed extract Latin Name: Cannabis sativa L Appearance: Brown yellow powder Part used: Seed Application: Health-care products Shelf Life: 24(month) Name Hemp Seed Botanical source Cannabis sativa L. Specification 3.5mm belwo,3.5-5.0mm...
Khun Jack Partnership Ltd
- 5000 - Chaing Mai
- +66 9 68 75 20 43
Friday, May 16, 2014
Quantity : 50000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Xiamen Karo Co.,Ltd
- karoplastic
- 361002 - Xiamen
- 0086 592 5135406
Friday, May 16, 2014
Quantity : 500000pcs - Price : $1-25/pc
Prototype Description SLA and SLS Why Use Stereolithography? Stereolithography is very similar to the SLS(Selective Laser Sintering) prototyping process.It's best to use SLA,when surface finish and overall appearance straight from the machine is the most important factor in the prototype...
Xiamen Karo Co.,Ltd
- karoplastic
- 361002 - Xiamen
- 0086 592 5135406