Ceramic Lined Composite Steel Pipe
Quantity : 1000 Price : 1 000,00 €
Ceramic Lined Composite Steel Pipe, Ceramic Lined Pipe, Composite Steel Pipe
Ceramic lined composite steel pipe is made through self-propagating high-temperature synthesis (SHS) technique. The pipe consists of three layers: smooth ceramic lining (compact corundum), ceramic and metal transition layer and the outer seamless steel pipe. The combination of high rigidity of ceramic and high elasticity of steel gives the pipe unmatchable features as an abrasion resistant, heat resistant and corrosion resistant material for use in the fields of power generation, metallurgy, mining, and chemical industry etc.. It has many advantages over steel , cast stone , and steel-plastic compound .
Features:
High abrasion resistant: Vickers hardness of the corundum lining is HV1100 to1500, as high as that of tungsten-cobalt hard alloys, and the abrasion resistance is 20 times as carbon steel . Its rigidity is the highest among all oxides.
Corrosion resistant: Corundum is a neutral material, and is acid-proof and fouling -free.
Heat resistant: The pipe can work under circumstances of -50 to 800 degrees Celsius.
Convenient installation: It is much lighter than any other types of composite , and can be welded or connected through flanges.
Cost effective: Ceramic-lined composite steel pipe can take the place of expensive stainless steel, titanium, nickel, cast stone or alloy . Extended service life can also reduce maintenance cost.
Specifications:
- Pipe diameters: 50 to 630mm
- Elbow angle: 22.5, 45, 60, 90, 120, 135, 150 degrees, etc.
- Three way : Y shaped, Y lateral and other special shapes
- Four way : straight cross, reducing cross.
- Ceramic lining thickness (including transition layer): 3 to 8mm
- Ex-works length: less than or equal to 3m. Customized maximum length can be achieved by welding.
Technical performance parameters Ceramic Lined Composite Steel Pipe
Ceramic Lined Composite Steel Pipe is our continuous improvement after years of study introduced new wear-resistant , the main technical performance parameters have the following:
Good wear resistance
Ceramic wear lining layer of the pipe due to the corundum ceramics (a-AL2O3), equivalent to 9.0 Mohs hardness up to HRC90 or more. So for metallurgy, electric power , mining, coal transportation and other industries grinding media have high wear resistance. Confirmed by the industrial operation : it is ten times the wear life of hardened steel or even several times .
Run a small resistance
Due to the inner surface of the pipe ceramic wear smooth, and never rust , not like the convex surface of seamless steel helix exists. After internal surface roughness of the test unit and water resistance characteristics of the test , the inner surface smoothness better than any metal , clearing a drag coefficient of 0.0193 , slightly lower than seamless . Therefore, the tube has a running resistance and other characteristics , can reduce operating costs.
Corrosion-resistant, anti-fouling
Since the ceramic wear steel ceramic layer (a-AL2O3), a neutral character. So with acid and seawater corrosion resistant , and also has anti-scaling and other characteristics.
We can also provide products of other customized sizes at your demand.
Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199
Contact : Sum Xuu, 862133780199
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Ceramic Lined Composite Steel Pipe Search in a category : Raw materials Search in a category : steel, ceramic, lined, pipe, composite |
France 
721013 Vehicles
721013 VehiclesReport abuse
Friday, May 24, 2024
Overview of Ti Gr1 Titanium Plate Yesheng Ti Gr1 Titanium Plate is a high-quality, commercially pure titanium plate made from grade 1 titanium. Ti Gr1 Titanium Plate Manufacturer is a popular choice because of its excellent strength, low weight, and good corrosion resistance, making...
Baoji Yesheng Titanium Industry Co.,LTD
- yesheng
- 721013 - baoji
- 0917 3906666
- +8615289358824
France 518106 Feasts items
518106 Feasts itemsReport abuse
Thursday, April 27, 2023
Brass is an object made of an alloy of copper and zinc. The melting point of brass with a copper content of 56%~68% is 934~967 degrees. Brass has excellent mechanical properties and abrasion resistance. So brass is a good material for manufacturing custom brass cnc machining parts...
YS RAPID MANUFACTURING LIMITED
- ysrapid
- 518106 - shenzhen
- 8615817251032
Taiwan 
330 Everything else / Bulk
330 Everything else / BulkReport abuse
Wednesday, October 21, 2020
Shining Jins Enterprise Co., Ltd. supplies a wide variety of precision, high quality cold forged and machined parts to the automotive industry. Using the latest in forging technology, we currently have the capacity to produce more than ten million cold forged parts per year. To provide...
Shining Jins Enterprise Co., Ltd.
- jsicyoke
- 330 - Taoyuan City
- +88 6 33 61 06 38
