Algomtl
 
Carbide saw tips
Details
China Raw materials
Raw materials

Carbide saw tips

Quantity : 100KG   Price : 50-60USD/KG


◆We produce according to customer's request.

Properties of grades

Grade
Density
(g/cm3)
Hardness (HRA)
TRS
(MPa)
Average Grain size
(ųm)
YG6/ K20
14.85～15.05
≥90.5
≥1860
In
YG8/K30
14.60～14.85
≥89.7
≥2060
In
YK08/K40
14.50～14.80
≥88.0
≥2060
Coarse
JX5/K20
14.65～14.85
≥90.0
≥2060
In
YG6X/K10
14.70～14.85
≥91.7
≥1860
Fine
YG8X/K10
14.60～14.85
≥91.0
≥2000
Fine
K10S
14.70～14.85
≥91.7
≥3000
Fine
K20S
14.60～14.80
≥91.0
≥3000
Fine
K10UF
14.70～14.95
≥93.0
≥3000
Superfine
K20UF
14.50～14.80
≥92.0
≥3000
Superfine
K30UF
14.25～14.55
≥91.0
≥3050
Superfine
R06
14.70～14.85
≥93.5
≥2400
Superfine
R03
14.90～15.10
≥94.0
≥2000
Superfine
YC40
12.80～13.30
≥89.5
≥1700
In
YC501
12.70～13.30
≥90.5
≥1680
In
Application recommended

Grade
Applications recommended
YG6/ K20
For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high
YG8/K30
For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high
YK08/K40
For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high
JX5/K20
For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high
YG6X/K10
For the cutting of the wood specially, recommend to use the high frequency welding
YG8X/K10
For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding
K10S
For the cutting of the hard wood specially, Recommend to use the high frequency welding
K20S
For the cutting of the aluminum specially, Recommend to use the high frequency welding
K10UF
For the cutting of the plywood、board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding
K20UF
For the cutting of the aluminum specially, Use the high frequency welding
K30UF
For the cutting of the stones specially, Use the high frequency welding
R06
For the cutting of the plywood、density board and the sandwich board, Use the high frequency welding
R03
For the cutting of the timber such as shaving board、laminated boar、density board and compound material etc, Use the high frequency welding
YC40
For the cutting of the large cast materials, Recommend to use the high frequency welding
YC501
For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding
Location : Tianyuan District, Zhuzhou, Hunan, China, 412000, 412000 Zhuzhou,
Contact : Elanie Wang, 86 15886366906

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
Carbide saw tips

Search in a category : Raw materials
Search in a category :
tips, carbide
Tunisia 3063 Craft
Olive wood Craft

Friday, April 28, 2017

Olive Wood Craft is established to provide a place where you can get environmentally products made of olive wood alternative to toxic chemicals and pollutants. These items are useful for your daily life to promote a healthier way to live for you, your family and future generations...

Olive Wood Craft

Indonesia 90125 Electronics / Computers
Genuine Printhead Kyocera KJ4A-RH UV Inkjet

Saturday, December 19, 2020

Quantity : 1 - Price : $ 1920

Genuine Printhead Kyocera KJ4A-RH UV Inkjet This new generation Kyocera KJ4A-RH is designed for high speed single-pass and multi-pass applications with printers using UV ink.The Kyocera KJ4A-RH is equipped with internal filters that eliminate foreign objects in ink and an internal...

Printpartin

  • 90125 - Makassar
  • +62 4 11 43 75 03
Indonesia 15122 Electronics / Computers
Seiko SPT-255 35pl Printhead

Monday, December 26, 2016

Quantity : 1 - Price : 629,00 €

- Seiko SPT-255 35pl Printhead - - - - Specification: - Model: SPT-255 SPT255-35PL printhead (seiko head) Fast firing frequency,high precision, long useable life High quality with competitive priceProduct: SPT255-35PL printhead (seiko head) Number of nozzles: 254 Native resolution...

Printer-Head

  • 15122 - Jakarta
  • +62 852 70708959
 
Secure payment

Information

Top search