 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carbide saw tips |
|
Grade
|
Density
(g/cm3)
|
Hardness (HRA)
|
TRS
(MPa)
|
Average Grain size
(ųm)
|
|
YG6/ K20
|
14.85～15.05
|
≥90.5
|
≥1860
|
In
|
|
YG8/K30
|
14.60～14.85
|
≥89.7
|
≥2060
|
In
|
|
YK08/K40
|
14.50～14.80
|
≥88.0
|
≥2060
|
Coarse
|
|
JX5/K20
|
14.65～14.85
|
≥90.0
|
≥2060
|
In
|
|
YG6X/K10
|
14.70～14.85
|
≥91.7
|
≥1860
|
Fine
|
|
YG8X/K10
|
14.60～14.85
|
≥91.0
|
≥2000
|
Fine
|
|
K10S
|
14.70～14.85
|
≥91.7
|
≥3000
|
Fine
|
|
K20S
|
14.60～14.80
|
≥91.0
|
≥3000
|
Fine
|
|
K10UF
|
14.70～14.95
|
≥93.0
|
≥3000
|
Superfine
|
|
K20UF
|
14.50～14.80
|
≥92.0
|
≥3000
|
Superfine
|
|
K30UF
|
14.25～14.55
|
≥91.0
|
≥3050
|
Superfine
|
|
R06
|
14.70～14.85
|
≥93.5
|
≥2400
|
Superfine
|
|
R03
|
14.90～15.10
|
≥94.0
|
≥2000
|
Superfine
|
|
YC40
|
12.80～13.30
|
≥89.5
|
≥1700
|
In
|
|
YC501
|
12.70～13.30
|
≥90.5
|
≥1680
|
In
|
Application recommended
|
Grade
|
Applications recommended
|
|
YG6/ K20
|
For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high
|
|
YG8/K30
|
For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high
|
|
YK08/K40
|
For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high
|
|
JX5/K20
|
For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high
|
|
YG6X/K10
|
For the cutting of the wood specially, recommend to use the high frequency welding
|
|
YG8X/K10
|
For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding
|
|
K10S
|
For the cutting of the hard wood specially, Recommend to use the high frequency welding
|
|
K20S
|
For the cutting of the aluminum specially, Recommend to use the high frequency welding
|
|
K10UF
|
For the cutting of the plywood、board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding
|
|
K20UF
|
For the cutting of the aluminum specially, Use the high frequency welding
|
|
K30UF
|
For the cutting of the stones specially, Use the high frequency welding
|
|
R06
|
For the cutting of the plywood、density board and the sandwich board, Use the high frequency welding
|
|
R03
|
For the cutting of the timber such as shaving board、laminated boar、density board and compound material etc, Use the high frequency welding
|
|
YC40
|
For the cutting of the large cast materials, Recommend to use the high frequency welding
|
|
YC501
|
For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding
|
Location : Tianyuan District, Zhuzhou, Hunan, China, 412000, 412000 Zhuzhou,
Contact : Elanie Wang, 86 15886366906
Contact : Elanie Wang, 86 15886366906
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
|
This page is about importers and exporters of Carbide saw tips Search in a category : Raw materials Search in a category : tips, carbide |
France 
467000 Stock lots
467000 Stock lotsReport abuse
Friday, April 07, 2023
Cylindrical graphite crucible works best with a quartz jacket because graphite oxidizes. High purity graphite crucible is good or bad with its material and density. Good graphite crucible doesn't oxidizes easily, so that the production loss is low. Bad graphite oxidation is not uniform...
Pingdingshan Wanhui Graphite Co., LTD
- 467000 - Pingdingshan
- 0375 6506966
- 86 15539792960
1053 
Madagascar 
101 Food
101 FoodReport abuse
Tuesday, July 07, 2026
Quantity : any requir
High quality ginger and Curcuma from Madagascar. We can provide you any quantity of ginger and curcuma you're looking for. To make sure to deal with the best company and to assure the quality of the services, don't hesitate to contact me for more inquiries and details . We export...
SOIMEX Import-Export
- 101 - Antananarivo
- +261345083315
- +261340152626