RUNNERS - 445 ads

Friday, January 06, 2023

Car lights are mainly used for lighting, which can be said to be the eyes of cars. Car lights are the collective name for all car lighting systems. The appearance of automobile lights has high requirements, and several important parts are transparent parts and electroplated parts...

Friday, January 06, 2023

With the vigorous development of the automotive industry, plastic auto part mold is also developing rapidly. 90% of auto parts are produced by injection molds, which is a huge market opportunity for auto plastic parts manufacturers . Common large-size auto parts such as car bumpers...

Friday, January 06, 2023

The car grille is a mesh part with a grid in the front part of the car. The front grille of the vehicle is located between the front bumper and the front cross member of the vehicle body. Since the hood lock needs to be arranged on the upper surface area of the front grille, the front...

Friday, January 06, 2023

The front and rear bumpers of the car are made of plastic, which not only maintains the protection function, but also has the characteristics of harmony and unity with the body shape, lightweight, and low fuel consumption. The plastic front bumper consists of three parts, namely...

Friday, January 06, 2023

Green Vitality Industry is a full-service mold manufacturer specializing in plastic injection mold design & engineering support, injection mold manufacturing, and qualifying of plastic injection molds. Green Vitality operates plastic injection molding machines ranging from 80T to 400T...

Friday, December 16, 2022

Quantity : 30-40sets/ - Price : USD3000-200000

Automotive Water Inlet Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Friday, December 16, 2022

Quantity : 30-40sets/ - Price : USD3000-200000

Multi Cavity Mold Design The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling balance, the multi cavity plastic mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc...

Saturday, December 10, 2022

Among all the excellent parameters like excellent sound insulation, ignorable low noise, extraordinary power, amazing stability when operating and unrivaled battery life, the most competitive parameter would be the stall force up to 63lbs, which is 20-30% than pro series massage guns...

Saturday, December 10, 2022

The BEOKA deep tissue massage pro gun is the kind of device used by college sports departments and professional sports teams. Deeply loosen the fascia, strong power directly to the muscles. Beoka DMS.F6 has about 21kg of stall force and 10mm amplitude, with five speeds up to 3,200...

Friday, December 09, 2022

2K Plastic Injection Moulding  ISO Class 8 Clean Room  Quality Control  Low & High Volume Manufacturing  Competitive Price  Reliability and Stability 2 component injection molding is one type of injection mold. 2k molding is also named as two colour injection moulding ...

Tuesday, November 15, 2022

Price : 10-30USD

Toilet seat mould quality points: cover mold cycle, cover mold life, Parting line whether there are sharp edges? Is the cover wall thickness even? How to make covers are light and strong? How to design a good exhaust ? How to make your toilet cover polish durable? How to judge the molding cycle...

Saturday, October 29, 2022

Price : 5000-30000

Home Appliance Mould Embroidery Machine Frame Mould 4937-2 Plastic frame for a multi-needle embroidery machine. Mould Name: Embroidery Machine Frame Mould Part Material: Pa 66 GF50% Product Description Large Embroidery hoop frame Mould Cavity: 1 Cavity Mould Size: 450*650*410 mm Mould...

Saturday, October 29, 2022

Price : 5000-30000

Plastic Gear Mold Design 49122 Mould Name: Custom Plastic Gear Mould Part Material: PA6 Product Size: 33*16.5mm Product Description: Plastic Motor Gear Mould Cavity: 4 cavities Mould Size: 350*350*332 MM Mould Cavity Steel: 8407 Mould Injection System: 3 plate point gates hot runner...

Saturday, October 29, 2022

Price : 5000-30000

Custom Plastic Molding Product Type: Plastic parts for kids' electric toothbrush Production Material: ABS No of Cavities: 2 cavities Mould Material: Steel Shrinkage: 1.005 Surface: A2 Type of gating: Banana gate Lead time: 4 weeks Tooling life: 500,000 Export to: America Two Color...

Saturday, October 29, 2022

Price : 5000-30000

Double Injection Mold Parts Part function: Plastic Lid for coffee machine Part Standard according to ISO 11496 Surface: SPI A-2 finish Flammability classification: UL-94 HB Part material: ABS & TPE Shrinkage: 0.55% Cavity steel: ASSAB 8407 Life Cycle: 500,000 shots Payment: 40% deposit...

Saturday, October 29, 2022

Quantity : 500000 Pie - Price : US $1 - 3,000 / Set

Features of resilient seal gate valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable disc's nut, adaptive offset; The variable pressure change O-Ring. Resilient Seated Gate Valve Working Principle The main seal is entirely rubber...

Thursday, October 27, 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts...

Thursday, October 27, 2022

2k injection molding process is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k plastic injection moulding consists of two different plastic materials and colors. With...

Thursday, October 20, 2022

Quantity : USD3000-20 - Price : 30-40sets/per month

It is the most widely used thermocouple in the hot runner system, and it is characterized by low price and is suitable for vacuum oxidation in reduction or inert atmosphere, the temperature range is -200～800℃, but the commonly used temperature is only below 500℃ because the oxidation...

Wednesday, October 12, 2022

Independent research and development and manufacture of forklift brake assembly line. The equipment adopts the leading two-stage bed plane conveying structure design, which improves the utilization rate of the flow channel to 100% (the upper and lower conveying methods of traditional...)

Sunday, October 09, 2022

Quantity : 20000 roll - Price : 0.01~1 USD

How does China sports tape work? The China sports tape's designed to mimic the elasticity of the skin so you can make the most of your range of motion. The tape's medical-grade adhesive is also waterproof and strong enough to last three to five days, even when you're exercising or...

Saturday, September 17, 2022

Plastic spoon mainly used for eating, so it need to be heat resistant and non-toxic,and could meet the requirements of environmental protectionso, we have to choose proper plastic materials, such as food grade PP,PS,PE etc.,we always stand in the customer's perspective to design and...

Saturday, September 17, 2022

Plastic soap is also made by plastic injection mold, as it need dimensional stability, good apperance and good color performance, so we have to choose the right materails for the mold and box,and the soap box mold need to be designed with right consturction, such as injecting system...

Thursday, September 01, 2022

Quantity : 1000TONS

Feature of Runner Beans Runner bean is a type of kidney bean, so named because it resembles a small purse in shape and pattern. Also known as Zebra beans, emperor beans, emperor beans, love-sickness beans. Runner bean used to be imperial tributes, It is beautiful in appearance, not...

Saturday, August 20, 2022

Quantity : 5000 - Price : 0-100

1.Overview of Engine Oil Pan The oil pan is an important part of automobile engine and an indispensable part of engine lubrication system.By sealing the lower crankcase, the oil on the moving surface of the engine is collected and stored, oil to prevent aging, part of heat loss,at...

Wednesday, August 17, 2022

Quantity : 1 set - Price : 5000USD-30000USD

Two Shot Tool Construction Part two shot tool construction saves the injection machine quantity and plant area, lower the labor cost and minimize the part handling, although mould cost is high but later process cost is lower, not on... Two Shot Plastic Injection Molding Parts How...

Wednesday, August 17, 2022

Quantity : 1 set - Price : 5000USD-30000USD

Mould Name: Precision Automotive Plastics Mould Part Material: PA66 G30 Product Description: BODY plastic Mould Cavity: Cavities Mold Mould Cavity Steel: 2344ESR Mould Injection System: hot runner Mould Ejection System: ejector pin Mould Cycle Time: 26's Mould Life Cycle: 1,000,000 Lead Time...

Wednesday, August 17, 2022

Quantity : 1 set - Price : 5000USD-30000USD

Mould Type: Plastic Precision Car Parts Mould Production Material: PC, PP, PA6, PA66, PE, ABS, HDPE, TPE, TPU, PET, PPS, POM, PBT, PMMA, PPS, SAN, etc. No of Cavities: Single or Multi cavity Core Material: 2344, S136,H13,S7, NAK80,SS420, P20 and other steel according to customer mould...

Tuesday, August 02, 2022

Quantity : 30-40sets/ - Price : USD3000-200000

The runner filling balance must be considered when designing the multi cavity plastic mold in order to ensure the best effect of filling balance, the multi cavity mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ; Most of the multi-cavity...

Tuesday, August 02, 2022

Quantity : 30-40sets/ - Price : USD3000-200000

USM will offer suggestions according to product requirments, quantity, material cost and so on to chose the hot runner in order to help customers to save cost. Hot runners are divided into open hot nozzles, pin-point hot nozzles, valve hot nozzles, etc. our engineer will chose the...