REVERSED - 175 ads

Monday, August 12, 2019

Solid phase extraction principle Solid phase extraction is a separation technique that combines selective retention, selective elution, and the like. When a complex sample solution passes through the sorbent, the sorbent selectively retains the aimed compound and a small number of...

Friday, August 09, 2019

Reversed-phase chromatography (RPC) contains any chromatographic method using a non-polar stationary phase. The word “reverse” has a historical background. In the 1970s, most liquid chromatography was performed on unmodified silica or alumina. Their surface chemistry is hydrophilic...

Thursday, August 08, 2019

Chromatography is a separation and analysis method and the separation is the core. Therefore, HPLC columns are the heart of the chromatographic system. The requirements for the column are high efficiency, good selectivity and fast analysis speed. Generally, the column length of about...

Thursday, August 08, 2019

Most common SPE cartridges are injection syringes made of polyethylene, in which there are two plugs made of polypropylene or fiberglass, with a certain amount of chromatographic adsorbent (filler) between the two plugs. SPE cartridges without sieve plate 1. Avoid “non-specific adsorption” 2...

Saturday, August 03, 2019

SPE cartridge can be divided into three classes on the markets: silica-based cartridges, polymer-based cartridges, and adsorption-based cartridges. And here we talk about the three types of silica-based cartridges. The first type is the C18 cartridges. This kind of cartridges bond...

Thursday, August 01, 2019

It is important for the experimenters to use and maintain chromatographic columns correctly. They should focus on many some things so as to protect the columns in the using process. Here we talk about several attentions. Avoid changing pressure and temperature dramatically and any...

Wednesday, July 31, 2019

Solid phase extraction (SPE), developed in the 1970s, can replace the traditional liquid-liquid extraction in many fields and has been applied more and more widely in the laboratory. The common solvent of SPE Hexane, isooctane, tetrahalide carbon, trihalomethane, dihalomethane, tetrahydrofuran...

Friday, July 19, 2019

Bonded-phase chromatography is a liquid-liquid chromatography method in which a stationary phase is covalently bound to a carrier particle, which overcomes the mechanical shock in the distribution chromatography, the constant loss of the stationary phase and the gradual change of...

Thursday, July 11, 2019

SPE column or SPE cartridges are based on liquid-solid phase chromatography theory, it is a kind of extraction, separation, concentrated sample preparation unit. Mainly used in sample pretreatment of various foods, agricultural and livestock products, environmental samples and target...

Tuesday, July 09, 2019

The reversed-phase HPLC columns may be repeatedly injected into a sample containing a strongly retained material, and in particular, the sorbent components such as large molecular weight or hydrophobic biological flow proteins and strong alkaline substances may be adsorbed on the silica medium...

Tuesday, July 09, 2019

Polymeric MCX SPE cartridges are used to extract strongly alkaline compounds. MCX is a mixed strong cation exchange adsorbent obtained by bonding sulfonic acid groups on highly crosslinked PS/DVB surface. It has both reverse phase and cationic exchange retentive properties and good...

Monday, July 08, 2019

People should face are a lot of problems when using SPE cartridges. As a consequence, we will talk about why the cartridge has a low recovery rate in the experiments. The first reason for the low recovery rate is that the target object does not remain sufficiently on the fillers....

Friday, July 05, 2019

When the polarity of the stationary phase is greater than the polarity of the mobile phase, it can be called normal phase partition chromatography or simply normal phase chromatography. If the polarity of the stationary phase is less than the polarity of the mobile phase, it can be...

Thursday, July 04, 2019

C8 HPLC columns are used to isolate many organic compounds, which are one of the reversed phase silica gel columns. The maintenance of C8 HPLC columns requires organic solvents. Chromatographic grade methanol is recommended and different brands of chromatographic columns should be...

Thursday, July 04, 2019

The filler of polymeric HLB SPE cartridges produced by a special copolymerization technology contains a certain proportion of the hydrophilic group and the hydrophobic group. Hydrophobic divinyl benzene structures retain nonpolar compounds and hydrophilic n-vinyl pyrrolidone structures...

Thursday, July 04, 2019

(1) When loading and unloading or replacing the HPLC columns, the action should be light and the joint should be tightened properly. Strong mechanical vibration must be prevented to avoid voids in the bed. (2) If the instrument is used for routine analysis, the sample type is limited...

Tuesday, July 02, 2019

The key to regenerating contaminated HPLC columns is to know the nature of the contaminants and to find the right solvent to remove. If contamination is caused by the accumulation of strongly retained materials during repeated injections, simple steps to remove these contaminants...

Monday, July 01, 2019

After selecting the type of SPE cartridges, we have to determine the specifications of the SPE cartridge. The principle of selecting the SPE cartridge specification is to first ensure that the SPE cartridge packing has sufficient capacity to retain the target compound 100% on the column...

Friday, June 28, 2019

Stationary Phase & Mobile Phase The stationary phase is used to separate the substances, which is packed into HPLC Column directly; Mobile phase is the carrier, which carries the substances into the stationary phase and goes through the stationary phase. It is gas in the vapor phase...

Monday, June 24, 2019

Low-power Liquid Level Sensor With 3.3-5V Output Low power Liquid Level Gauge, it was design for internet of thing specially, its low power consumption is suitable to power by battery and Periodic supply,can be used to measure liquid level for fire protection water net, heating system...

Monday, June 24, 2019

Lightning Protection Hydraulic Liquid Level Transmitter & Gauge Lightning protection liquid level Sensor,can be used to measure liquid level for Reservoirs, river, sewage treatment, urban water supply, water tank, ocean level and others field need liquid level measurement. Typical...

Friday, June 21, 2019

The cation chromatography column is a kind of high-performance liquid chromatography, which is a liquid chromatography method for analyzing anions and cations. The method has the advantages of good selectivity, sensitivity, rapidity, and simplicity, and can simultaneously measure...

Wednesday, June 19, 2019

SPE cartridges, with a full name of Solid Phase extraction cartridges, is also called the SPE column( solid phase extraction column). The solid phase extraction column/cartridges is a pretreatment device for the sample being analyzed, which developed from the chromatographic column...

Friday, June 14, 2019

Hawach introduced the properties and application range of HPLC column stationary phase in the silica gel matrix. Silica gel matrix: Silica gel, weakly acidic, has a strong memory, used to separate non-polar, weakly acidic compounds, oils, etc.; C18, a silica-based uncapped reversed-phase...

Thursday, June 13, 2019

NH2 HPLC columns can be used in the positive phase or in the negative phase, but it should be noted that the positive phase solvent and the negative phase solvent are usually not mutually soluble. New NH2 HPLC columns are preserved in the positive phase environment under normal circumstances...

Tuesday, June 11, 2019

Solid phase extraction (SPE) is a separation process by which compound that is dissolved or suspended in a liquid mixture, thereby being separated from other compounds in the mixture according to their physical and chemical properties. There are 4 general functions as below: 1.Matrix...

Thursday, June 06, 2019

As one of the useful sample preparation technique, solid phase extraction can prevent many problems, such as incomplete phase separations, recoveries with poor quantity, waste of expensive fragile glassware, and extra disposal of organic solvents, which you may occur if you use the...

Monday, May 20, 2019

Low-power Digital Liquid Level Sensor With 0.5-2.5V Output Low power Liquid Level Gauge is design for internet of thing specially. Its low power consumption is suitable to power by battery and Periodic supply. It can be used to measure liquid level for fire protection water net, heating system...

Monday, May 20, 2019

Corrosive Hydraulic Liquid Level Transmitter & Gauge The anti-corrosion liquid level transmitter is based on the principle of hydrostatics to measure the level or water depth,high corrosion resistance for Sulfuric Acid(H2SO4), Hydrochloric Acid(HCI), Sodium Hydroxide(NaOH). Corrosive...

Monday, April 29, 2019

CN (cyanopropyl) solid phase extraction (SPE) cartridge, CN (cyanopropyl) is a weakly hydrophobic silica matrix filler, which can be used as a normal phase or reverse phase adsorbent. The non-polar or weakly polar acid, medium and basic compounds are extracted from the aqueous solution...