CONTROLS - 27883 ads

Wednesday, March 06, 2024

The tps automotive is also known as throttle opening sensor or throttle switch. In order to make the fuel injection meet the requirements of different sensor for automotive working conditions, the EFI system is equipped with a throttle position sensor on the throttle body to check...

Wednesday, March 06, 2024

SRS supplemental restraint system consists of an airbag and an inflating mechanism to form an integral airbag module, a collision supplemental restraint system that senses collisions and sends deployment commands to the airbag module, and a wire harness that transmits signals from...

Wednesday, March 06, 2024

Starting System in Automobile Therefore, the whole process from when the crankshaft starts to rotate under the action of external force to when the engine starts to automatically idling is called starting of the engine. The device required to complete the starting process is called...

Wednesday, March 06, 2024

The vehicle starter can convert the electrical energy of the battery into mechanical energy and drive the engine flywheel to rotate to start the engine. Before the engine can run on its own power, it must be rotated by external force. The process in which the engine transitions from...

Wednesday, March 06, 2024

Price : USD 130 - USD 980

HMCG Series Harmonic Drive Cup Type HMCG Series is cup type of harmonic drive, it has the characteristics of compact and concise design, no backlash, input and output coaxial, excellent in positioning and rotation accuracy. Want to know more details about the HMCG Series harmonic drive gear box...

Wednesday, March 06, 2024

Price : USD 130 - USD 980

Through big data modeling, simulation optimization and performance verification, harmonic drive actuator company PICEA Motion team realizes the optimal design of tooth profile, breaks through barriers of experience accumulation and correction in transmission design, and continuously...

Wednesday, March 06, 2024

PFA separatory funnel/soluble polytetrafluoroethylene separatory funnel/Teflon plastic separatory funnel use: 1. Used for solid-liquid or liquid-liquid reaction experiments to control the amount of liquid added and the reaction rate. 2. Material separation and purification: Separate...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Prototyping YS Rapid is a professional and experienced cnc prototyping factory in China. With over ten years of experience in custom CNC prototyping in metal and plastics, YS Rapid provides professional and full CNC machining prototype service for simple or complicated parts manufacturing...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

Custom CNC Milling Service China custom CNC milling is a machining process used to machine high complex parts. A milling cutter used for custom CNC milling in China service can be moved along different axes for machining narrow blanks, grooves, outer contours, etc. With our China...

Wednesday, March 06, 2024

Quantity : 10000pcs/p - Price : 20USD--

CNC Machining Nylon Nylon is also called polyamide, and its abbreviation is PA. Nylon is a general term for thermoplastic resins containing repeating amide groups [NHCO] in the main chain of the molecule. It is a tough, angular, translucent or milky white crystalline resin. Nylon...

Tuesday, March 05, 2024

Titanium tube stock is a type of titanium product that is used across various applications, including the aerospace and medical industries. It is made by melting and casting titanium sponge or scrap, then rolled and welded into tubes. Titanium tubes are known for their high strength...

Tuesday, March 05, 2024

A titanium square bar is a four-sided bar made of pure titanium or titanium alloy. Titanium square rod stock is commonly used in various industries, including aerospace, medical, and marine applications, where its exceptional properties, such as high strength, light weight, and excellent...

Tuesday, March 05, 2024

Titanium oval tubing is a hollow metal product made of pure titanium or a titanium alloy that has an oval-shaped cross-section. It is used in various industries, including aerospace, medical, and marine applications, where its excellent properties such as light weight, high strength...

Tuesday, March 05, 2024

Quantity : 1000TONS/M - Price : $5-100/kg

NICKEL ALLOY STEEL PIPE /TUBE Nickel alloy is one of the most useful materials for manufacturing technically superior nickel alloy pipe for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloy is exceptionally corrosion-resistant...

Tuesday, March 05, 2024

Price : USD0.05~USD3.00

Intended for use in dusty and wet environments (ip67 micro switch) Compact design Extended life and excellent dependability Optional: use a variety of levers Frequently used in industrial control, appliances, and automobile electronics, among other things For more information about...

Tuesday, March 05, 2024

Price : USD0.05~USD3.00

Mini Tact Switch G1/G17 Waterproof design (IP67) Long life and high reliability 0.8*0.8mm PCB terminals Double levers actuating mechanism designed to ensure the operation safety Variety of levers and control modes. Mini size could be used in limited space. Unionwell switch, as an...

Tuesday, March 05, 2024

Price : USD0.05~USD3.00

Mini Waterproof 24 Volt Micro Switch G305 Designed for water and dust tight (IP67) Small compact size Long life and high reliability Widely used in automotive electronics, appliances, industrial control, etc. Mini Waterproof Micro Switch G305 Related Applications The Micro Switch...

Tuesday, March 05, 2024

The mission of the ground satellite system is to track, measure and control the earth resources satellite, implement functional management, and receive, record and process the image data sent back by the satellite. Satellite Image Processing Techniques Satellite Data System Management...

Tuesday, March 05, 2024

Price : USD0.05~USD3.00

Well sealed with IP67 protection level Mini housing which matches various application environments. With worldwide access permit certifications High durability makes sure the stable performance Multiple lever options available Lead wires specially provided for connecting terminals...

Tuesday, March 05, 2024

Price : USD0.05~USD3.00

Small compact dimensions Long service life and excellent reliability Multiple levers and terminals Applications include auto control, appliance and industry control, etc. Specifications of mini micro limit switch G91 Place of Origin Guangdong, China (Mainland) Brand Name Micro...

Tuesday, March 05, 2024

PEEK Valve in Home Appliances PEEK has good wear resistance, self-lubrication, non-toxicity, high-temperature resistance, low density, and can decrease noise, reduce energy consumption and prolong service life compared to metals.It can be formed by one-step Peek injection moulding...

Tuesday, March 05, 2024

UART LCD Display Module Size: 2.8" to 10.1" LCD type: TFT View angle: IPS/12 o'clock Interface: UART, RS232, RS422, RS485 Touch: CTP/RTP Full name of UART screen is Universal Asynchronous Receiver/Transmitter Screen. RS232, RS422, RS485 are belong to UART LCD modules. All of zhunyi...

Tuesday, March 05, 2024

Z70069HD 1024*600 7 Inch Horizontal Display HDMI Board Support Touch Screen Z70069HD 1024*600 7 inch Horizontal Display HDMI Board Support Touch Screen is 7 inch touch screen HDMI TFT touch display module w/hdmi VGA, video, av signal driver board for portable products, Industry and security...

Tuesday, March 05, 2024

Micro machining is a type of manufacturing technique used to produce small and precise parts, components, and structures. This manufacturing process involves using advanced technology to cut and shape materials at a microscopic level. Micro machining typically uses sophisticated CNC...

Tuesday, March 05, 2024

Precision Medical Swiss Machining Medical manufacturing refers to the production and distribution of cnc machining medical devices, equipment, and supplies used in the healthcare industry. It involves a complex process that includes the design, development, testing, and production...

Tuesday, March 05, 2024

CNC Swiss Precision Machining Services CNC Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex...

Tuesday, March 05, 2024

Automotive Precision Machining CNC machining technologies are widely used in the automotive industry to manufacture high-quality automotive parts that are both cost-effective and efficient. With over 28 CNC technologies in use, including 5 axis machining, milling and turning, micro...

Tuesday, March 05, 2024

Aluminum CNC Services Aluminum is a popular material for Swiss machining due to its excellent strength-to-weight ratio, corrosion resistance, and versatility. At Falcon, we utilize Swiss type lathes to achieve incredibly precise tolerances and complex shapes. Our custom aluminum CNC...

Tuesday, March 05, 2024

Quantity : 65000PCS/m - Price : $8.00-$300.00/pc

ISP08-20 2-Way N.C. Poppet Valve A proportional solenoid-operated, two-way, normally closed, poppet-type, screw-in hydraulic cartridge valve for low-leakage blocking and load-holding applications. Specifications of ISP08-20 2-Way N.C. Poppet Valve Operating Pressure 250 bar (3600...)

Saturday, March 02, 2024

The elevator Monarch 3000 mainboard is an essential component of the elevator control system. It is responsible for processing and coordinating all the commands and signals that are sent between the elevator's different control subsystems. The mainboard contains a microcontroller...