BeVision D2

Dynamic Image Analysis Particle Size for Dry Measurement

The BeVision D2 provides an efficient solution to the size and shape analysis of dry, high-flowability powders or granules. Tens of thousands of particles can be measured by a BeVision D2 within three minutes. Combining a high-speed camera with a precise telecentric lens, the BeVision D2 is able to efficiently analyze the size and shape of particles in the range of 30 - 10,000 µm. The BeVision software helps you evaluate particle size and shape from 24 different aspects and further organizes the data into an all-around validation of particles.

Measurement range: 30 – 10,000 µm

24 different particle size and shape parameters

Reduction of workload and time

Outstanding reproducibility

Results in compliance with ISO 9276-6

Fully automated operation

Powerful software provides a comprehensive evaluation

Comparable with sieving results

•Why Image Analysis Method?

Easy

Capture an image of particles, identify particles, then measure their size and shape. Every step of image analysis is easy and clear.

Shape analysis

Based on a direct view of particles, it is possible to analyze not only the size of particles, but also their shape.

Seeing is believing

The image analysis method determines the size and shape of every individual particle and then sums it up to form a statistic. Details of particle size or shape distribution can be accurately provided.

•Why Dynamic Image Analysis Method?

Efficiency

A continuous particle flow passing through the measurement zone helps achieve a higher efficiency of the measurement.

Oversized particle sensitivity

The dynamic image analysis method is sensitive to oversized particles; it is even possible to estimate the size of oversized particles.

Reliable results

The maximized number of measured particles ensures the statistical significance of measurement results.

•BeVision D2 Hardware: Guaranteed Accuracy and Efficiency for You

To measure the size and shape of particles over a great variety of applications, the BeVision D2 has equipped with a comprehensive range of hardware. Corresponding to the sample material properties, selecting the best hardware can help measure the size and shape of particles with optimum accuracy and efficiency.

•Particle Size and Shape Parameters：

Size parameters

Equivalent diameters: area-equivalent diameter、perimeter-equivalent diameter; Feret diameters: maximum and minimum Feret diameters, XLF ("length")

Martin diameters: maximum and minimum Martin diameters; Legendre ellipse: major and minor axes

Shape parameters

Size difference in 2 directions: aspect ratio、L/W ratio、ellipse ratio; Round-likeness and rectangle-likeness: Circularity、irregularity、compactness、extent、box ratio

Contour concavity: Concavity、convexity、solidity; For elongated particles: Elongation、straightness

Performance

Dry dispersion provided by BeVision D2 particle size analyser makes it suitable for a diverse range of applications.

1. Accuracy Calibration

Use the scale to verify accuracy and convert the pixel to actual size during the test and analysis. Ensure the results are accurate and reliable.

2. Recognize Connected Paticles

The main purpose of the function is to filter agglomerate or adhesive particles, in order to avoid that test result is affected. Connected particles refer to agglomerate particles forming by two or more than two adhesive particles. The feature of connected particles is that there is sunken area in particle image. Through judging the size, depth and angle of the sunken area, connected particles can be recognized.

3. Automatic Circulation and Dispersion System

The dry system adopts electromagnetic vibration feeding, gravity-driven dispersion, which ensures sampling is uniform and continuous.