Auto Rear View Mirror Housing Mold
Auto Rear View Mirror Housing Mold
The car rearview mirror is an important part of car exterior parts, located on both sides of the car, is one of the most important exterior parts of the car. The rearview mirror of a car is a device used to allow the driver to observe the road conditions during driving, which can be said to be the driver's eyes. Automobile rearview mirrors are generally composed of mirror ring, base, mirror housing, bracket, rotating shaft, and other parts.
Precautions for Auto Rearview Mirror Housing Mold
The parting line of the plastic part is on the R, and the R is on the fixed and movable mold respectively. In order to avoid the parting line appearance of the visual surface, special attention should be paid to making the core side 0.05-0.1mm smaller to avoid mismatch of the plastic part.
The fixed and movable die stop should be designed with precise positioning. Avoid dislocation of fixed and movable mold cores and prevent the mismatch of plastic parts.
Because of the sharp edges of the Auto rearview mirror housing mold setting and the mold core plastic material position, must be taken care of to protect it during the mold making. It is best to use opaque tape to protect it to avoid gaps during transportation.
When designing an oblique slider with a core pulling along the Z-axis, it is necessary to pay attention to the slope of the bottom surface of the front end of the oblique slider to be greater than or equal to the angle of the bottom surface of the oblique slider seat to avoid undercutting.
The design of the cooling lines and spring of the inclined slider must be parallel to the angle of the core pulling of the inclined slider to facilitate the processing of the inclined slider.
The bottom of the wear block at the bottom of the inclined slider should be designed to be straight, and the wear block should be protruding to avoid interference with the B plate and the stroke stop of the inclined slider when the inclined slider moves backward.
Since the oblique slide block must be installed with the fixed mold core to save the jaws, the slider needs to be designed for the mushroom head positioning, and the design of the craft screw is also necessary to facilitate the installation of the fixed mold core and the oblique slide block to save the jaws.
We have types of injection molding dies for sale, if you have needs to buy injection mold products, please contact us.
Contact : Qin Susan , 0755 26825352
Good deal: buying from seller
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of Auto Rear View Mirror Housing Mold Search in a category : Everything else / Bulk Search in a category : view, mirror, auto, mold, rear, housing |
Monday, May 13, 2024
lighting fixtures
Quantity : 14000 - Price : 2,00 €
Take advantage of our special offer exclusively for B2B clients: an impressive lot of 14,000 lighting fixtures, varied in design and functionality, offered at the exceptional price of only €2 per piece. Offer Details: - Quantity Available: 14,000 pieces - Price Per Unit: €2 - Variety: Multiple models available, suited to different uses and aesthetic preferences. Products Available: - Modern indoor lighting fixtures - Outdoor and garden lamps - Economical and durable LED lighting...
TRANSIDI
- 22440 - PLOUFRAGAN
- 02 30 96 63 26
- 33(0)603670505
Saturday, February 20, 2016
Quantity : 1000 MT PE - Price : 400 usd per mt CIF
Specifications Green mung beans 1.Admixture: Max.0.5% 2.Moisture: Max.14% 3.Imperfect Rate: Max.3% 4.Size: 3.0mm/ 3.4mm,/3.8mm/4.0mm Green Mung Bean Green Mung Bean Moisture Max 14% Admixtur Max 0.5% Imperfect Rate Max 3% Size 3.0mm/3.4mm,3.8mm/4.0mm Place...
Khun Jack Partnership Ltd
- 5000 - Chaing Mai
- +66 9 68 75 20 43
Saturday, February 20, 2016
Quantity : 1000 MT PE - Price : 300/mt CIF
PUMPKIN SEEDS GROWN WITHOUT SHELL NEW CROP 2015 TOP GRADE AND COMPETITIVE PRICE PRODUCT DETAILS AND SPECIFICATIONS Product name Dark Green Pumpkin Seeds Year of production Crop 2016 Origin Thailand Grade A,AA grade Style Common or Organic Moisture 9%max Purity 99...
Khun Jack Partnership Ltd
- 5000 - Chaing Mai
- +66 9 68 75 20 43