Algomtl
svgfair.com
 
ASTM A333 Grade 6 Seamless Pipe
Details
China Raw materials
Raw materials

ASTM A333 Grade 6 Seamless Pipe

Quantity : 1000   Price : 1 000,00 €

ASTM A333 Grade 6, ASTM A333 Grade 6 seamless pipe, ASTM A333 pipe, Seamless pipe for Low-Temperature Service,Welded Steel Pipe for Low-Temperature Service

ASTM A333 Grade 6 is the part of standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 Grade 6 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
ASMT A333 Grade 6 seamless
This specification covers seamless and welded steel pipe for low temperature service. The Grade 6 alloy steel involved is similar to AISI 4032 low alloy steel.
Seamless and Welded Steel Pipe size for Low-Temperature Service:
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 6
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A333 Grade 6 Chemical Compositions(%)
Compositions Data
Carbon(max.) 0.30
Manganese 0.29-1.06
Phosphorus(max.) 0.025
Sulfur(max.) 0.025
Silicon …
Nickel …
Chromium …
Other Elements …
Mechanical properties for ASTM A333 Grade 6 Alloy Steel
Properties Data
Tensile strength, min, (MPa) 415 Mpa
Yield strength, min, (MPa) 240 Mpa
Elongation, min, (%), L/T 30/16.5
Impact requirements:
the notched-bar impact properties of each set of three impact specimens, when tested at temperature specified shall be not less than the values prescribed.
Referenced Documents
  • ASTM A 370 Test Methods and Definitions for Mechanical testing of Steel Products
  • ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe.
  • ASTM A 671 Specification for General requirements for Alloy and Stainless Steel Pipe
  • ASTM E 23 Test Methods for Notched bar Impact testing of Metallic Materials

Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北,
Contact : Sum Xuu, 862133780199

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ASTM A333 Grade 6 Seamless Pipe

Search in a category : Raw materials
Search in a category :
pipe, seamless, a333, astm, grade
India 400004 B2B Services
photo not available

Sunday, January 10, 2021

Quantity : 3 - Price : 17,00 €

1 This specification handles metal and metal bolting for strain valves and valves, and flangesfittings to secure increased distress or greater pressure assist, or other special purpose software. Cable and Utilities will most likely be hot-wrought and May be further farther processed...

ananakafasteners

  • 400004 - Mumbai
  • +918369074984
Taiwan 330 Audio and Video
High quality Neodymium U YOKE Speakers part made in Taiwan

Tuesday, July 21, 2026

Shining Jins Enterprise Co., Ltd. specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan. Production capacity: T-Yoke/Pole Piece : - Diameter of Piece : 28mm up to 250mm - Diameter of Pole : 10mm up to 70mm...

Shining Jins Enterprise Co., Ltd.

  • jsicyoke
  • 330 - Taoyuan City
  • +88 6 33 61 06 38
France 518106 Underwears
CNC 5-axis Machining

Thursday, April 27, 2023

If you want to find a cost effective china 5 axis machining services for your product, YS Rapid can be a good choice for you. Based on our rich experiences and professional expertise, our cooperative china 5 axis cnc machining services are available for both rapid prototyping and small ...

YS RAPID MANUFACTURING LIMITED

  • ysrapid
  • 518106 - shenzhen
  • 8615817251032
 
Secure payment

Information

Top search