Raw materials
ASTM A333 Grade 6 Seamless Pipe
Quantity : 1000 Price : 1 000,00 €
ASTM A333 Grade 6, ASTM A333 Grade 6 seamless pipe, ASTM A333 pipe, Seamless pipe for Low-Temperature Service,Welded Steel Pipe for Low-Temperature Service
ASTM A333 Grade 6 is the part of standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 Grade 6 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
ASMT A333 Grade 6 seamless
This specification covers seamless and welded steel pipe for low temperature service. The Grade 6 alloy steel involved is similar to AISI 4032 low alloy steel.
Seamless and Welded Steel Pipe size for Low-Temperature Service:
Outer Dimensions: 19.05mm - 114.3mm
Wall Thickness: 2.0mm - 14 mm
Length: max 16000mm
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 6
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A333 Grade 6 Chemical Compositions(%)
Compositions |
Data |
Carbon(max.) |
0.30 |
Manganese |
0.29-1.06 |
Phosphorus(max.) |
0.025 |
Sulfur(max.) |
0.025 |
Silicon |
… |
Nickel |
… |
Chromium |
… |
Other Elements |
… |
Mechanical properties for ASTM A333 Grade 6 Alloy Steel
Properties |
Data |
Tensile strength, min, (MPa) |
415 Mpa |
Yield strength, min, (MPa) |
240 Mpa |
Elongation, min, (%), L/T |
30/16.5 |
Impact requirements:
the notched-bar impact properties of each set of three impact specimens, when tested at temperature specified shall be not less than the values prescribed.
Referenced Documents
-
ASTM A 370 Test Methods and Definitions for Mechanical testing of Steel Products
-
ASTM A999/A 999M Specification for General requirements for Alloy and Stainless Steel Pipe.
-
ASTM A 671 Specification for General requirements for Alloy and Stainless Steel Pipe
-
ASTM E 23 Test Methods for Notched bar Impact testing of Metallic Materials
Location : Carretera Siping, Shanghai, 200081, China, Shanghai 闸北, Contact : Sum Xuu, 862133780199
Registered since 22 September 2013
Good deal: buying from seller
Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute. We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
Friday, April 07, 2023
The application of large graphite block in photovoltaic industry has been rapidly developed, and the output and market of polysilicon ingot materials for solar panels have increased by leaps and strides, which also provides a promising new market for graphite products in the field...
- 467000 - Pingdingshan
- 0375 6506966
- 86 15539792960
Friday, October 15, 2021
Quantity : 1 / Unit - Price : 7 483,00 €
SPECIFICATIONS: Frame: FACT 11m full carbon, 29" front wheel, 27.5" rear wheel, full internal cable routing, 148mm spacing, fully sealed cartridge bearings, 150mm of travel, geo adjust head tube, geo adjust horst pivot Rear Shock: FOX FLOAT X2 Factory, LSC, LSR, 2-position lever, 55x210mm...
Wednesday, November 25, 2020
Quantity : 5000 - Price : 8,00 €
Shining Jins specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan. Areas of Application: Home audio loudspeakers driver Neodymium Sub-Woofer dirver P.A. loudspeakers driver Car loudspeakers driver Neodymium...
- misb
- 330 - Taoyuan City
- +88 6 33 61 06 38
|