FORCES - 5802 ads

Tuesday, April 11, 2023

Quantity : 10000 - Price : 100-500

Our membrane load cell is small in size and easy to install. Suitable for medical equipment, batching scales, etc from professional tension load cell manufacturer. As one of the most professional force transducer manufacturer, Tianguang Sensor provides washer load cell, pull force...

Tuesday, April 11, 2023

Quantity : 10000 - Price : 100-500

The TJH-2 series parallel beam load cell are load cells in parallel. In addition to the conventional characteristics of other types of sensors such as high accuracy and easy installation, the biggest advantage of this series of sensors is that the mounting surface is leveled at four corners...

Tuesday, April 11, 2023

Quantity : 10Tons - Price : $500-$1000/Ton

PPGL(Aluminized zinc color coating plate) is a new material produced by high-end application in China in recent years. It is made of aluminized zinc plate (55% aluminum, 43% zinc and 1.6% silicon) which is more corrosion resistant than zinc plating,coated with organic coating and...

Tuesday, April 11, 2023

Price : 100USD

Rubber buffer is a safety device designed to stop a descending car or counterweight beyond its normal limits and relieve the force of the elevator entering the pit in an emergency. Panda Elevator provides customers with a series of elevator polyurethane buffer according to different...

Tuesday, April 11, 2023

Price : 100USD

Oil Buffer Elevator oil buffer is a safety device designed to stop a descending car or counterweight beyond its normal limits and relieve the force of the elevator entering the pit in an emergency. Panda Elevator provides customers with a series of oil buffers for elevators according...

Tuesday, April 11, 2023

EAS ink tag is a type of security tag used to prevent shoplifting in retail stores. It contains an electronic article surveillance (EAS) tag that sets off an alarm if someone tries to leave the store with a tagged item. If the alarming ink tag is removed by force, it typically triggers...

Tuesday, April 11, 2023

Quantity : 600,000 pi - Price : USD2.0--USD10.0

Introduction To connect fittings, consuming appliances, and piping Cold-resistant to -30°C Various gas line rubber hose standards can be offered. For EU EN16436-1 and EN16436-2 are predominantly used. Class 2, for reduced pressure and class 3 for unreduced pressure for class 3-IGT...

Tuesday, April 11, 2023

Price : 10-30USD

Steel Wire Tube Brush Steel pipe brush has strong grinding force and is effective in removing rust, welding slag, paint and other attachments that are not easy to remove. It is often used for polishing and deburring the inner wall of metal holes. It is widely used in air conditioning...

Tuesday, April 11, 2023

Price : 10-30USD

Silicon Carbide Disc Brush The silicon carbide brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Tuesday, April 11, 2023

Price : 10-30USD

Nylon brush strips are most common to see on the sides of escalators. Running elevator steps and side walls have a direct gap. The nylon brush strips are installed near the gap, in order to prevent people's shoelaces, clothing, etc. from being involved in the elevator and causing...

Saturday, April 08, 2023

Geko pneumatic actuators used compressed air to exert force on a cylinder piston and thus push or pull it in a specific direction. The motion of the piston is delivered to the parts to be moved via the piston rod or magnetic friction closure. A pneumatic cylinder is an actuator operated...

Saturday, April 08, 2023

The low pressure casting machine is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting part with the pressure as well. The pressure is powered by the inert gas or compressed air inside the sealed crucible, pressure push...

Saturday, April 08, 2023

Quantity : 200 - Price : 100-5000

GNWQ series sewage cutting pump non-clogging submersible sewage water pump is suitable for 0-20 meters, large flow, medium and low head use, full head, low energy consumption. The product also adopts an easy-to-remove cutter head design, which can be replaced with different forms...

Saturday, April 08, 2023

Vacuum etching machine uniformity ≥90%, etching factor ≥3.5 times. The vacuum suction device makes the spray operating system generate negative pressure, forming a low suction force, absorbing the etching liquid rich in copper ions, effectively preventing the "puddle". Which can improve...

Friday, April 07, 2023

Bypass of the cardia with a stent results in gastroesphageal reflux. In order to prevent the latter and thereby minimise the risk of bronchopulmonary aspirations, the Anti-Reflux Esophageal Stents from MICRO-TECH is equipped with a unique valve system. The revolutionary aspect of the...

Friday, April 07, 2023

Quantity : Quantities

Sibai provide custom metal washers from almost any material: Steel, Stainless Steel, Aluminum, Brass, Copper, Titanium, Nylon, Acetal, PTFE, Fiberglass, Rubber and more. The finishing capabilities Sibai can provide are Heat treating, Plating, Flattening, Painting, Grinding, Coating...

Tuesday, April 04, 2023

Rubber Coated Magnet or rubberised neodymium magnets are best described by one concept, that is: rubber coated magnet is a perfect combination of force and protection. Rubber covered magnets are actually one extension of pot magnets using the same working principle, but the rubber...

Saturday, April 01, 2023

What is the family mold? A mold that can only produce one product at a time is called a single-cavity injection mold. If a mould is used to produce two or more plastic parts at a time, multi-cavity injection, if the parts are different, such a mold is called family mold. The plastic...

Saturday, April 01, 2023

Price : USD0.1-15

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Saturday, April 01, 2023

Good force pull on the material ,meanwhile the material can be fully distributed evenly without shearing, so the temperature of the material could be cooling down Technical Details of Mixing Rotor Brand：LESUN Model：φ20 ~ φ300 Material：38CrMoALA/ W6Mo5Cr4V2/ HIP Properties: Wear-resisting...

Saturday, April 01, 2023

The metric spline shaft stock is the form of mandrel splines used by all the twin screw extruders over the world. The standards of the spline are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of the involute spline shaft can make the groove depth...

Friday, March 31, 2023

For a long time, Primus It has been working to solve the bottleneck problem of network bandwidth optical modules through continuous technological innovation, adheres to concentrate superior forces constantly improve the industrial layout, and enhance the company's core competitiveness...

Friday, March 31, 2023

FTTH Wholesale Primus lT is one of professional ftth manufacturers and ftth suppliers in China, committing to the research and development of PON technology and provides the best solution in ftth to ethernet/lan converter. Primus lT can cooperate in the development according to...

Friday, March 31, 2023

AOC/DAC Wholesale There are mainly three types of DAC/AOC: Passive copper cable, active copper cable and active optical cable. AOC is composed of integrated optoelectronic devices, which is used for high-speed and high-reliability transmission equipment between data centers and other equipment...

Thursday, March 30, 2023

Making a precast concrete formwork magnet includes a lot of fastening work: fastening formwork on mold table, fixing wire boxes at designated spots etc. The traditional practice would be drilling holes and then inserting pins for fastening. To be more exact: drilling holes both on...

Thursday, March 30, 2023

The principle of this pot magnet is to glue one piece of solid disc magnet, either NdFeB or Ferrite, into the steel housing. Then, depending on customer's applicational requirement a cover made of stainless steel is available. NdFeB Flat Pot Magnet These NdFeB pot magnets are often...

Thursday, March 30, 2023

Pot Magnets with Screw Holes Description These neodymium magnet with screw hole feature threaded holes that enable users to fasten them on walls, wood boards, etc for holding tools. NdFeB(neodymium) magnet is used for the strong force. Pot magnet is named after its shape, and it is...

Thursday, March 30, 2023

They are round magnets with hole in center and they can be also called: pot magnet with borehole, pot magnet with mounting holes, holding magnet with borehole, etc. This is one of the most widely used pot magnets. They are made by gluing magnets and steel pots together. Filling materials...

Thursday, March 30, 2023

Product Description This stud magnet can be used solely for holding with the metal rod providing an easy way for removal. Meanwhile, it also can be used together with something else, for example, it shows one possibility where the pot magnet works as a base and plastic grippers can...

Wednesday, March 29, 2023

Price : 10 000,00 €

Find the perfect furnishings for your dream bathroom "What kind of space is created determines what kind of life you will live", our designer will find the perfect furnishings for your dream bathroom! Vermont can provide various dream bathroom vanities for sale, and our selection...