VALIDATION - 115 ads

Wednesday, May 31, 2023

Price : 8 000,00 €

Rapid Prototyping Systems The Prodigy family by S2C is a comprehensive solution for IC designers focusing on FPGA and ASIC prototyping. The Prodigy Complete FPGA Based Prototyping Solutions by S2C is meticulously engineered to address the requirements of IC designers seeking robust...

Saturday, April 01, 2023

Medical Equipment Mold HanKing Mould is an ISO9001: 2015 certificated experienced factory focusing on developing, design and manufacturing plastic injection moulds and plastic molded parts for medical devices. Medical Device Mold HanKing Mould has More than 10 years of experience...

Friday, March 10, 2023

Prodigy Player Pro Prodigy Player Pro is a tool that works with the FPGA-based prototyping platforms from S2C. Prodigy Player Pro plays three roles in speeding your development process - it configures the prototype, runs remote system management and provides set up for multi-FPGA debugging...

Friday, March 10, 2023

The Prodigy S7-13P Logic System is depend on Xilinx's Virtex UltraScale+ VU13P FPGA. With higher capacity and performance, The Prodigy S7-13P offers the latest innovation in prototyping, accelerating system validation, and verification. FPGA Resources - Virtex UltraScale+ VU13P Board...

Wednesday, February 08, 2023

Quantity : 1000tons - Price : 0.01-100 USD/PCS

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and customized...

Saturday, January 21, 2023

Dynamic Image Analysis Particle Size for Dry Measurement The BeVision D2 provides an efficient solution to the size and shape analysis of dry, high-flowability powders or granules. Tens of thousands of particles can be measured by a BeVision D2 within three minutes. Combining a high-speed...

Saturday, January 21, 2023

The Bettersizer ST is an automated laser scattering particle size distribution analyzer designed for industrial quality control. Its patented DLOS (Dual Lens Optical System) guarantees the instrument to provide consistent and reliable particle size distribution results. The SOP...

Tuesday, December 13, 2022

Price : 0.01-100 USD/PCS

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and customized...

Wednesday, October 12, 2022

Abstract of BGI prenatal test Aim: We aimed to demonstrate noninvasive prenatal diagnosis (NIPD) of hemophilia A (HA) using a haplotype-based approach. Methods: Two families at risk for HA were recruited for this study. First, maternal haplotypes associated with pathogenic variants...

Tuesday, September 20, 2022

Quantity : 100L - Price : 41,20 €

Have you ever wondered how you would feel young forever? Have you ever looked in the mirror and wished those wrinkles weren't there? Well, not many people could say they have. However, it is possible to do it today. With cosmetic argan oil, the fountain of youth is no longer a fiction...

Thursday, August 18, 2022

Quantity : 2000 sets/

The Bettersizer ST is an automated laser diffraction laser scattering particle size distribution analyzer designed for industrial quality control. Its patented DLOS (Dual Lens Optical System) guarantees the instrument to provide consistent and reliable particle size distribution results...

Wednesday, August 17, 2022

Quantity : 1 set - Price : 5000USD-30000USD

Two Shot Tool Construction Part two shot tool construction saves the injection machine quantity and plant area, lower the labor cost and minimize the part handling, although mould cost is high but later process cost is lower, not on... Two Shot Plastic Injection Molding Parts How...

Friday, August 05, 2022

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and customized...

Wednesday, June 22, 2022

Price : 5000USD-30000USD

Industrial mould is not a mold technology process, but a type of mold that is distinguished from the purpose of use. Generally speaking, products produced with industrial moulds are used for processing or business operations, such as industrial instruments, valves, fittings, , tools, etc...

Tuesday, June 14, 2022

With more than 20 years of experience in the injection molding industry and equipped with ISO Class 8 Clean Room, Packson plastic injection moulding factory offers Medical Contract Plastic &Rubber Injection Molding, Custom Injection Molding, Insert Molding and Over Molding by...

Saturday, April 23, 2022

Abstract of BGI prenatal test Aim: We aimed to demonstrate noninvasive prenatal diagnosis (NIPD) of hemophilia A (HA) using a haplotype-based approach. Methods: Two families at risk for HA were recruited for this study. First, maternal haplotypes associated with pathogenic variants...

Saturday, April 16, 2022

When manufacturing plenty of bluetooth PCBboards, it is impossible to solder parts by hand. You will need PCB instruments to complete this step, to make a bare board, and assemble all parts onto the printed circuit board. There are many issues to consider at each stage of the assembly process...

Friday, April 01, 2022

Quantity : 1000tons - Price : 0.01-100 USD/PCS

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and customized...

Friday, March 18, 2022

Dynamic light scattering (DLS), also known as photon correlation spectroscopy (PCS), is a commonly used characterization method for nanoparticles. The DLS particle size analyzer has the advantages of accuracy, rapidity, and good repeatability for the measurement of Nano particles...

Wednesday, March 09, 2022

Price : 100USD

As a professional automotive plastic injection molding companies Keyplast offers one-stop solutions for automotive industry. Many customers from automotive industry approach Keyplast to solve the challenges of the automotive field, from prototypes, engineering validation testing,...

Tuesday, February 01, 2022

Nous exportons des Rames de papier blanc : Format A4-Dimension 21*29,7 cm- nombre des feuilles 500 feuilles -Grammage 80g-Papier ultra blanc. Location : Coopérative les hauts plateaux n 42 ouled fayet, 16000 Alger , Contact : Group Algeria Holding, 00213560968275

Friday, December 31, 2021

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and...

Friday, October 22, 2021

Price : 5000USD-30000USD

Plastic Mould Tool Making We have the tool making capacity for precision injection mold projects, with high precision CNC machining and EDM, slow wire cut machine. Injection Mold Making HanKing mould is a plastic injection mold maker and injection molding manufacturer located in Shenzhen, China...

Thursday, October 21, 2021

When manufacturing plenty of PCB boards, it is impossible to solder parts by hand. You will need PCB instruments to complete this step, to make a bare board, and assemble all parts onto the printed circuit board. There are many issues to consider at each stage of the assembly process...

Wednesday, September 29, 2021

Quantity : 10 product - Price : USD 30,000.00-700,00

1. High precision and character for forming machine and head die 2. Water and wind cooling for module 3. On-line belling 4. Unique digital control system 5. High automatic, high output, stable production condition. The Parameter of PE/PVC Large Diameter Double Wall Corrugated Pipe...

Friday, September 10, 2021

Quantity : + de 5 Ton - Price : Selon le volume et l

An important fishing company operating for more than 20 years located in Algiers, having the necessary authorizations to fish for fish, crustaceans, sea cucumbers (especially the 6 species of the Algerian coast) and have - a fishing fleet of more than ten ships of different sizes...

Tuesday, September 07, 2021

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and customized...

Wednesday, May 26, 2021

HANGZHOU ZETIAN TECHNOLOGY CO., LTD was established in 2008, and has national wide impact in China now as a fast-growing company specialized in environmental pollution monitoring and industrial process control. Our instruments and emission analyzers can be customized by our professional...

Wednesday, May 12, 2021

Magnetic assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and...

Friday, April 30, 2021

HanKing Mould Enginering Ltd. started the business in the year of 1996 as a mold supplier china in the line of mold making and injection molding in Longgang, Shenzhen, China. With continuous developments and progresses, we have become a professional Chinese plastic molding company...