Equipment goods

ZJHM High Temperature Pneumatic Flow Control Valve

This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential is big, and operation is steady. Compared with the ordinary single and double seat-regulating valve, it has low noise, simple structure and convenient assembling and dismantling characteristics.
Its valve shape is small, the body is light, the performance is good, and the capacity is big. So it's the new type general regulating valve product. It is suitable for the common fluid medium and techniques condition industrial control system.
High Temperature Pneumatic Flow Control Valve ((ZJHM)
Advantages
1, To achieve greater CV value and wider adjustable ratio
S shaped structure body is generated from the fluid analysis in a unique, can be suppressed by flow path shape complex and eddy current as well as flow path suddenly expand caused by complex and irregular flow phenomenon, which brings the medium flow, high efficiency in addition, guide wing cage type valve can be unstable fluid efficiently sleeve around the into the sleeve, due to these features, the CV3000 series valve with the original V series valve compared with a 30% increase in CV, and the adjustable ratio was enlarged from 30: 1 to 50: 1 (add attachments of up to 75: 1), so it can be used to control a wide range of load changes.

2,High precision flow characteristics can bring the "ideal" flow
Adopting high precision flow characteristic curve as the standard technical parameters, to achieve the "ideal" flow theory. The process gain stability; computer simulation, valve opening degree of process control conditions, can realize flexible control.

3,Small volume and light weight
CV3000 series valve due to film the spring type small lose simple mechanical structure of the power of the executive body, thus successfully greatly reduced height, realize the miniaturization, according to multi spring diaphragm actuator and S shaped valve, control valve of CV3000 type and V type series valve compared can achieve 30% - 40% a small, light, efficient use of space has contributed to the.

4,Full specifications, wide use
CV3000 series valve has from the vacuum valve to the valve, varied from low to high temperature control. Widely used in petroleum refining, petrochemical, chemical fertilizer, chemical, steel, metallurgy, papermaking, power, light industry and other automation control process.

3. High Temperature Pneumatic Flow Control Valve ((ZJHM)
Main Parts Material:
Valve Body/Cap: S.S304.
Valve Core/ Seat: S.S304, Stellite.
Packing: PTFE.
Gasket: : Graphite.
Membrane Cover: A3.
Spring: 60Si2Mn.
Valve Stem: S.S 304.
Nut/Bolt: : S.S 304.

Location : Heyi Industrial Zone,Oubei Town, 325105 Oubei ,
Contact : Yoki Lee, 86 577 57781017

Good deal: buying from seller

Visit our guide for a secure transaction! Under no circumstances Algomtl can be held responsible for the content of the ads published. Only the sellers and buyers responsability is involved in case of dispute.
We invite you to read our terms of use. You can also visit our FAQ section and see our information section on the risks associated with counterfeiting.
This page is about importers and exporters of
ZJHM High Temperature Pneumatic Flow Control Valve

Search in a category : Equipment goods
Search in a category :
flow, valve, pneumatic, control, high, zjhm, temperature
Iran (Islamic Rep) 1954966313 Everything else / Bulk
PE Stretch Film

Wednesday, July 15, 2015

PE Stretch Films Stretch film is a commonly used name for multi-layer (3 to 5 Layered) elastic polyethylene film which it's main raw material is Linear low density polyethylene (LLDPE). Stretch film is used primarily for packing and protection of products, ranging from loads bundled...

Atlas Pars

  • 1954966313 - Tehran
  • +982126150173
  • +989126882335
photo not available

Friday, May 11, 2012

Price : 40,00 €

PNEUS D OCCASION Poids Lourd - Toute dimensions /22.5 - 40 Euros VL - /14 /15 /13 - Possibilité doublage et triplage 1 euros / Pneus 2 Euros Expédition Maritime par conteneur 20' et 40' high cube toute destination Sur demandeLocation : 9-11 allée Louis Bréguet, 93420 Villepinte, Contact ...

LMI

  • villepinte
  • 93420 - Villepinte
  • 01 48 67 87 40
  • 06 68 43 55 56
Italy 81011 Raw materials
photo not available

Thursday, April 10, 2008

Nous proposons Polycarbonate(PC),Polymenthyl Metacrylate (PMMA),Acrylonitrile Butadiene Styrene(ABS) et High Impact Polystyerene(HIPS) en feuilles. Top qualitéLocation : Piazza Vessella,3, 81011 ALIFE (CE), Contact : Hassan El azouzi, 00 39 347 998 64 61

ELMA di EL AZOUZI & C s.a.s

  • elmaitaly
  • 81011 - ALIFE (CE)
  • 00 39 347 998 64 61